Amodel® Supreme AE-9933 is a 33% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with outstanding dielectric strength at temperature. High thermomechanical performance provides excellent creep resistance. Low moisture absorption is also characteristic of this resin. The Amodel® AE family is specially formulated to work in the modern automotive and electrical & electronics markets, featuring non-corrosive stabilizers for increased performance at temperature. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: AE-9933 BK 324

Amodel® Supreme AE-9950 is a 50% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with outstanding dielectric strength at temperature. High thermomechanical performance provides excellent creep resistance. Low moisture absorption is also characteristic of this resin. The Amodel® AE family is specially formulated to work in the modern automotive and electrical & electronics markets, featuring non-corrosive stabilizers for increased performance at temperature. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: AE-9950 BK 902

Amodel® AFA-6133 V0 Z is a 33% glass-fiber reinforced, flame retardant grade of polyphthalamide (PPA) resin specifically formulated for connector applications requiring compatibility with both infrared and vapor phase soldering operations typically used by the electronics industry. Amodel® AFA-6133 V0 Z offers high flow and short molding cycles, thereby enhancing molding productivity and lowering costs. - Black: AFA-6133 V0 Z BK 324

Amodel® AFA-6145 V0 Z is a 45% glass-fiber reinforced, flame retardant grade of polyphthalamide (PPA) resin specifically formulated for connector applications requiring compatibility with both infrared and vapor phase soldering operations typically used by the electronics industry. Amodel® AFA-6145 V0 Z offers high flow and short molding cycles, thereby enhancing molding productivity and lowering costs. - Black: AFA-6145 V0 Z BK 324 - Natural: AFA-6145 V0 Z NT

Amodel® AS-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0.125 in (3 mm). Key properties of this structural resin are high heat deflection temperature, high flexural modulus, high tensile strength, excellent creep resistance and low moisture absorption. - Black: AS-1133 HS BK 324 - Natural: AS-1133 HS NT

Amodel® AS-1145 HS is a 45% glass reinforced heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0.125 inch (3 mm). Key properties of this structural resin are high heat deflection temperature, high flexural modulus, high tensile strength, excellent creep resistance, and low moisture absorption. - Black: AS-1145 HS BK 324 - Natural: AS-1145 HS NT

Amodel® AS-1566 HS resin is a 65% glass and mineral reinforced polyphthalamide (PPA) resin that exhibits a high deflection temperature and high flexural modulus. This grade was designed specifically to be cost effective for most applications requiring high stiffness, good dimensional stability and chemical resistance. Typical applications for Amodel® AS-1566 HS resin include electrical connectors and housings, motor components, pistons, covers, engine parts and transmission components. - Black: AS-1566 HS BK 324

Amodel® AS-1933 HS is a 33% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material exceeds the performance required by the automotive industry for polymeric materials exposed to antifreeze at 226°F (108°C), even when tested at 275°F (135°C). Potential applications include a variety of automotive components such as thermostat housings, heater core endcaps, heater hose connectors, and water inlets, outlets and valves. - Black: AS-1933 HS BK 324

Amodel® AS-1935 HS is a 35% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material exceeds the performance required by the automotive industry for polymeric materials exposed to antifreeze at 226°F (108°C), even when tested at 275°F (135°C). It also offers great laser marking performance. - Black: AS-1935 HS BK 128

Amodel® AS-1935 HS is a 35% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material exceeds the performance required by the automotive industry for polymeric materials exposed to antifreeze at 226°F (108°C), even when tested at 275°F (135°C). - Black: AS-1935 HS BK 328

Amodel® AS-1945 HS is a 45% glass reinforced grade of polyphthalamide (PPA) resin developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material exceeds the performance required by the automotive industry for polymeric materials exposed to antifreeze at 226°F (108°C), even when tested at 275°F (135°C). Potential applications include a variety of automotive components such as thermostat housings, heater core endcaps, heater hose connectors, and water inlets, outlets and valves. - Black: AS-1945 HS BK 324

Amodel® AS-4133 HS is a 33% glass reinforced, lubricated, heat stabilized grade of polyphthalamide (PPA) that offers fast cycle times and moldability in hot water molds. Testing conducted on samples dry as molded and samples conditioned to 50% relative humidity in accordance with ISO-1110, Accelerated Method. Typical applications include electrical and electronic components especially for automotive systems. - Black: AS-4133 HS BK 324 - Natural: AS-4133 HS NT

Amodel® AS-4133 L polyphthalamide (PPA) a 33% glass reinforced, lubricated, structural grade of polyphthalamide (PPA) that offers fast cycle times and is hot water moldable. Typical applications include electrical and electronic components. - Black: AS-4133 L BK 324 - Black: AS-4133 L EI BK 324 - Natural: AS-4133 L NT

Amodel® AS-4145 HS polyphthalamide (PPA) is a a 45% glass reinforced resin that is hot-water moldable. Key properties include high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance and excellent electrical properties. This resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti-lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. Its rapid crystallization rate and high flow can result in shorter cycles, thereby enhancing molding productivity and lowering costs. - Black: AS-4145 HS BK 324

Amodel® Supreme AS-9933 HS is a 33% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with the highest thermomechanical performance of any PPA on the market. The Amodel® AS family is specially formulated for structural applications and thick-walled parts (>3 mm), featuring a higher weldline strength than standard Amodel® PPA products. Excellent creep resistance and low moisture absorption are also characteristic of this resin. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: AS-9933 HS BK 324

Amodel® Supreme AS-9950 HS is a 50% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with the highest thermomechanical performance of any PPA on the market. The Amodel® AS family is specially formulated for structural applications and thick-walled parts (>3 mm), featuring a higher weldline strength than standard Amodel® PPA products. Excellent creep resistance and low moisture absorption are also characteristic of this resin. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: AS-9950 HS BK 324

Amodel® AT-1001L is an unreinforced, impact modified polyphthalamide (PPA) resin that exhibits exceptional impact strength at temperatures ranging from room temperature to as low as -40°F (-40°C), which suggests possible applications in ski boots and hockey skates. In addition, its chemical and wear resistance, combined with good mechanical properties, make Amodel® AT-1001L resin a prime candidate for applications such as anti-friction and wear resistant components, chemical, oil field, automotive and safety equipment. - Natural: AT-1001 L NT

Amodel® AT-1002 HS is a neat, toughened, heat stabilized polyphthalamide (PPA) resin that offers superior retention of properties after humid thermal aging; high impact at low temperature and better mechanical properties than many unreinforced thermoplastic polyester and nylon resins. This material was specifically designed for automotive electrical/electronic applications such as connectors, sockets and sensors. - Natural: AT-1002 HS NT

Amodel® AT-1116 HS polyphthalamide (PPA) is a toughened, heat stabilized 16% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional stability, chemical resistance and ductility. This resin has a high heat deflection temperature and a high flexural modulus, with greater tensile elongation than untoughened glass reinforced PPA. Typical applications include bearings, bearing retainers/cages, housings, chemical processing equipment components, motor frames, sporting equipment, lawn and garden equipment and components that require press-fit or snap-fit assembly. - Black: AT-1116 HS BK 324 - Natural: AT-1116 HS NT

Amodel® AT-1125 HS polyphthalamide (PPA) is a toughened, heat stabilized 25% glass reinforced resin, designed as a cost effective solution for applications requiring stiffness, good dimensional stability, chemical resistance and ductility. This resin has a high heat deflection temperature and a high flexural modulus, with greater tensile elongation than untoughened glass-reinforced PPA. Typical applications include bearings, bearing retainers/cages, housings, chemical processing equipment components, motor frames, sporting equipment, lawn and garden equipment and components that require press-fit or snap-fit assembly. - Black: AT-1125 HS BK 324

Amodel® AT-6115 HS is a 15% glass-fiber reinforced, toughened grade of polyphthalamide (PPA) resin designed to possess more elongation than other 15% glass-fiber reinforced grades of Amodel resin. This grade was developed for automotive snap-fit electronic connectors. It offers high flow and short molding cycles. - Black: AT-6115 HS BK 324 - Natural: AT-6115 HS NT

Amodel® AT-6130 HS is a 30% glass-reinforced, toughened polyphthalamide (PPA) resin that has more elongation than other 30% glass-reinforced grades of Amodel® resin. This grade was developed for automotive snap-fit electronic connectors. It offers high flow and short molding cycles. The processing window is relatively broad and mold temperatures as low as 150°F (65°C) can be used. - Black: AT-6130 HS BK 324 - Natural: AT-6130 HS NT

Amodel® DW-1130 is a 30% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. - Black: DW-1130 BK938

Amodel® DW-1140 is a 40% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. - Black: DW-1140 BK938

Amodel® DW-1150 is a 50% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. - Black: DW-1150 BK938

Amodel® ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel® PPA resins, ET-1000 HS offers high fatigue strength, good chemical resistance and high mechanical property retention over a broad temperature and humidity range. - Natural: ET-1000 HS NT

Amodel® FC-1140 L is an FDA compliant, 40% glass fiber reinforced resin designed for high strength, stiffness and improved demolding properties. This combines with its excellent thermal properties, low water absorption and good hydrolytic stability to make it particularly suited for components used in food service and consumer applications such coffee machines and ovens. - Black: FC-1140 L BK 946 - Black: FC-1140 L BK 302 - Natural: FC-1140 L NT - Anthracite grey: FC-1140 L GY001

Amodel® FC-1140 STL is an FDA compliant, 40% glass fiber reinforced resin designed for high strength and stiffness along with improved demolding properties. This combines with excellent thermal properties, low water absorption and good hydrolytic stability to make it particularly suited for components used in food service and consumer applications, such coffee machines and ovens. The STL series of Amodel® PPA was developed specifically for food and beverage applications that require limited impact of polymers on smell, taste and odor. For specific FDA applications, please contact your Syensqo representative. - Black: FC-1140 STL BK 946 - Natural: FC-1140 STL NT

Amodel® FC-1150 and FC-1150 L is an FDA compliant, 50% glass fiber reinforced resin designed for high strength and stiffness (and improved demolding properties for the L grades). This combines with its excellent thermal properties, low water absorption and good hydrolytic stability to make it particularly suited for components used in food service and consumer applications such coffee machines and ovens. - Natural: FC-1150 (L) NT - Black: FC-1150 (L) BK 946

Amodel® FC-1150 STL is an FDA compliant, 50% glass fiber reinforced resin designed for high strength and stiffness along with improved demolding properties. This combines with excellent thermal properties, low water absorption and good hydrolytic stability to make it particularly suited for components used in food service and consumer applications, such coffee machines and ovens. The STL series of Amodel® PPA was developed specifically for food and beverage applications that require limited impact of polymers on smell, taste and odor. For specific FDA applications, please contact your Syensqo representative. - Black: FC-1150 STL BK 946 - Natural: FC-1150 STL NT

Amodel® HFFR-4133 is a 33% glass-reinforced, halogen-free, flame retardant polyphthalamide (PPA) resin which offers enhanced processing capabilities for electrical and electronic applications. This resin is rated V-0 by Underwriters Laboratories using the UL94 test and is hot-water moldable. It has high flow and a wide processing window and offers good surface appearance, especially for larger electrical components. This grade can withstand the demanding infrared reflow soldering process typically used in the electronics industry. It is well suited for connectors and other electrical devices requiring surface mount technology (SMT). - Black: HFFR-4133 BK 324 - Natural: HFFR-4133 NT

Amodel® HFFR-4135 is a 35% glass-reinforced, halogen-free, flame retardant polyphthalamide (PPA) resin which offers enhanced processing capabilities for electrical and electronic applications. This resin is specifically formulated to meet UL94 V-0 @ 0.4 mm for electronic devices while also having high flow, low moisture absorption, and superior mechanical properties. This grade is hot water moldable and offers excellent surface appearance while being designed to withstand the demanding infrared reflow soldering process which makes it well suited for connectors and other electrical devices requiring surface mount technology (SMT). - Black: HFFR-4135 BK 902

Amodel® HFZ A-4133 L polyphthalamide (PPA) is a 33% glass-reinforced, hot water moldable resin. Key properties include heat resistance, reduced outgassing and high strength and stiffness over a broad temperature range. It also displays low moisture absorption, excellent chemical resistance and excellent electrical properties. Amodel® HFZ A-4133 L resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti-lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. - Black: HFZ A-4133 L BK 324 - Natural: HFZ A-4133 L NT

Heat stabilized 30% carbon fibres reinforced injection moulding grade based on a partly aromatic Polyamide

Heat stabilized injection moulding grade based on a partially aromatic Polyphtalamid; Halogen and red phosphorous free flame retardant

PPA compound, 40% glass fiber reinforced, heat stabilized. Intended for engineering applications that require a maximum service temperature higher than that of normal aliphatic polyamides. In addition to the outstanding thermal and chemical resistance, it provides high and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Suitable for drinking water applications.

PPA compound, 50% glass fiber reinforced, heat stabilized. Intended for engineering applications that require a maximum service temperature higher than that of normal aliphatic polyamides. In addition to the outstanding thermal and chemical resistance, it provides high and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Suitable for drinking water applications.

PPA compound, 35% glass fiber reinforced, heat stabilized. Intended for engineering applications that require a maximum service temperature higher than that of normal aliphatic polyamides. In addition to the outstanding thermal and chemical resistance, it provides high and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Extended heat ageing resistance.

PPA compound, 45% glass fiber reinforced, heat stabilized. Intended for engineering applications that require a maximum service temperature higher than that of normal aliphatic polyamides. In addition to the outstanding thermal and chemical resistance, it provides high and constant mechanical performance, unaltered even after moisture absorption. Excellent creep behavior and dimensional stability. Extended heat ageing resistance.

PPA, 35% glass fiber reinforced, heat stabilized Designed for engineering applications requiring a maximum service temperature higher than that of standard polyamides.The most relevant characteristics are: High stiffness and strength at elevated temperatures, excellent creep behavior, small influence on mechanical properties after moisture uptake, good dimensional stability and low warpage. XT4 grades show an easier processability compared with other PPAs.Â