AKROMID® T9 GF 50 black (7693) is a 50% glass fibre reinforced polyphthalamide with heat stabilization, high rigidity and strength, as well as high temperature and chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state. Parts with tight dimensional tolerances even under high mechanical load.

AKROMID® T9 ICF 20 6 black (7907) is a 20% carbon fibre polyphthalamide with high stiffness and strength, as well as high chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state. Technical parts in the automotive and electric industry

AKROMID® T9 ICF 30 6 black (7908) is a 30% carbon fibre polyphthalamide with high stiffness and strength, as well as high chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state. Technical parts in the automotive and electric industry

AKROMID® T9 ICF 40 6 black (7909) is a 40% carbon fibre polyphthalamide with high stiffness and strength, as well as high chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state. Technical parts in the automotive and electric industry

AKROMID® T9 M 40 black (7851) is a 40% mineral-filled polyphthalamide with very good surface and slight tendency to warp, as well as high chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state. Technical parts in the automotive and electric industry

Base Polymer Polyphthalamide Filler/Additive System 30 % glass fibres, 15 % PTFE Special Features improved sliding / wear, high stiffness Market Segment Automotive, Machinery Application Area functional components

Base Polymer Polyphthalamide Filler/Additive System 30 % mineral Special Features elastomer modified, heat stabilised, processing stabilised, easy release (demoulding) Market Segment Machinery Typical Applications injection moulded parts, functional components

Base Polymer Polyphthalamide Filler/Additive System mineral Special Features high heat stabilised, elastomer modified, easy release (demoulding), low warpage, injection moulding grade, good flow, low water absorption

Amodel® A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications. - Black: A-1130 FW BK 324

Amodel® A-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, high flexural modulus and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. Testing conducted on samples dry as molded and samples conditioned to 50% relative humidity in accordance with ISO-1110, Accelerated Method. - Black: A-1133 HS BK 324 - Natural: A-1133 HS NT

Amodel® A-1133 NL resin is a 33% glass reinforced polyphthalamide (PPA) which is distinguished by its high-reflectivity white color. This grade features a high deflection temperature for compatibility with SMT processes, and low moisture absorption. - White: A-1133 NL WH 505

Amodel® A-1145 DW is a 45% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also exceptional. This grade has been approved for use with potable water in the United States, France, Germany, and the United Kingdom. - Natural: A-1145 NT DW - Black: A-1145 BK 937 DW

Amodel® A-1145 HS LZT is an NIR laser transmissive, 45% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, very high flexural modulus and very high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. This grade is designed to be paired with other Amodel® black grades for black-on-black laser welding applications. - Black: Amodel® A-1145 HS LZT BK 979

Amodel® A-1145 HS is a 45% glass reinforced, heat stabilized polyphthalamide (PPA) with a high heat deflection temperature, very high flexural modulus and very high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. - Black: A-1145 HS BK 324 - Natural: A-1145 HS NT

Amodel® A-1422 LS is a mineral filled, light stabilized, highly reflective polyphthalamide (PPA) which has been designed specifically to meet the needs of high-brightness (HB) LEDs. It offers high initial whiteness of the assembled LED. Adhesion to the encapsulants is excellent. The thermal properties combined with low shrinkage provide excellent packing around the head frame. The inherent thermal stability of the material means high readibility and excellent luminosity retention over the product service life. This grade also exhibits high deflection temperature, flexural modulus and tensile strength, with excellent creep resistance and low moisture absorption. It can be easily molded using convention injection molding equipment and methods. - White: A-1422 LS WH 171

Amodel® A-1565 HS is a 65% glass and mineral-reinforced polyphthalamide (PPA) designed to be cost-effective in applications requiring high stiffness, good dimensional stability and good retention of stiffness at elevated temperatures. This grades also exhibits a high deflection temperature and flexural modulus. - Black: A-1565 HS BK 324

Amodel® A-1625 HS is a carbon and glass-reinforced, heat-stabilized grade of polyphthalamide (PPA). It is formulated for applications requiring the dissipation of static charge. This material is well suited for fuel systems applications requiring low permeation, low swell, and high thermal resistance. It can also be used for components of electrical/electronic systems requiring high strength and stiffness, as well as static charge dissipation. Amodel® A-1625 HS provides low moisture absorption, excellent dimensional stability and has creep resistance superior to other electrostatic dissipative materials. - Black: A-1625 HS BK 324

Amodel® A-1933 HSL is a 33% glass reinforced grade of polyphthalamide (PPA) resin. This grade was developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material was tested using the aggressive automotive coolant system, ethylene glycol with organic acid stabilizer, at 130°C (266°F). It exceeds the performance required by the automotive industry for polymeric materials exposed to high-temperature antifreeze solutions. Potential applications include a variety of automotive components such as thermostat housings, heater core endcaps, heater hose connectors, and water inlets, outlets, and valves. - Black: A-1933 HSL BK 328

Amodel® A-4122 HR resin is a 22% glass reinforced polyphthalamide (PPA), designed to provide high crystallinity when molded in water-cooled molds. This material exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance, and excellent electrical properties. Its rapid crystallization rate and high flow can result in short cycles and therefore high molding productivity and lower part cost. - White: A-4122 HR WH 117

Amodel® A-4122 LS is a 22% glass fiber reinforced, light-stabilized, high-reflectivity white grade of Amodel polyphthalamide (PPA). It is designed to provide high crystallinity when molded in water-cooled molds. This resin exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance and excellent electrical properties. Its rapid crystallization rate and high flow can result in short cycles and therefore high molding productivity and lower part cost. - White: A-4122 LS WH 678

Amodel® A-4122 NL resin is a 22% glass reinforced, high-reflectivity white grade of polyphthalamide (PPA), designed to provide high crystallinity when molded in water-cooled molds. This material exhibits high heat resistance, high strength and stiffness over a broad temperature range. It also offers low moisture absorption, excellent chemical resistance and excellent electrical properties. Its rapid crystallization rate and high flow can result in short cycles and therefore high molding productivity and lower part cost. - White: A-4122 NL WH 905

Amodel® A-4133 HH BK is a 35% glass fiber reinforced heat stabilized grade of polyphthalamide (PPA) that has been designed to provide outstanding property retention to thermal oxidative degradation at temperatures of 230°C. Other features are fast cycling and hot water moldability. This product is particularly suitable to air induction applications within downsized automotive engines such as air induction charge air cooling and exhaust gas recirculation. This grade features high heat deflection temperature, high flexural modulus and high tensile strength, as well as excellent creep resistance and low moisture absorption. - Black: A-4133 HH BK 311

Amodel® A-4145 HH is a 45% glass fiber reinforced heat stabilized grade of polyphthalamide (PPA) that has been designed to provide outstanding property retention to thermal oxidative degradation at temperatures of 230°C. Other features are fast cycling and hot water moldability. This product is particularly suitable to air induction applications within downsized automotive engines such as air induction charge air cooling and exhaust gas recirculation. This grade features high heat deflection temperature, high flexural modulus and high tensile strength, as well as excellent creep resistance and low moisture absorption. - Black: A-4145 HH BK 311

Amodel® A-4160 HSL resin is a 60% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits high modulus at elevated temperatures, a high heat deflection temperature and exceptional creep resistance. This material was designed for metal replacement applications. Its rapid crystallization and good flow characteristics allow shorter cycles for enhanced molding productivity. - Black: A-4160 HSL BK324

Amodel® A-4160 L is a 60% glass reinforced polyphthalamide (PPA) which exhibits high modulus, a high heat deflection temperature, and exceptional creep resistance. This material was designed to replace metal and is particularly suited for corrosion sensitive applications. Its rapid crystallization and good flow characteristics allow shorter cycles for enhanced molding productivity. - Black: A-4160 L BK324

Amodel® A-4422 LS resin is a 22% reinforced, light-stabilized, high-reflectivity white grade of polyphthalamide (PPA). The material exhibits high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance, and excellent electrical properties. Its rapid crystallization rate and high flow characteristics can result in shorter cycles, thereby enhancing molding productivity and lowering costs. - White: A-4422 LS WH118

Amodel® A-6135 HN polyphthalamide (PPA) is a 35% glass reinforced resin that is heat stabilized, non-lubricated and hot-water moldable. Key properties of the resin are high heat resistance, high strength and stiffness over a broad temperature range. It also exhibits low moisture absorption, excellent chemical resistance and excellent electrical properties. Amodel® A-6135 HN resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti-lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. - Black: A-6135 HN BK 324

Amodel® A-6135 HS polyphthalamide (PPA) is a 35% glass reinforced resin that is heat stabilized, lubricated and hot-water moldable. Key properties of the resin are high heat resistance, high strength and stiffness over a broad temperature range. It also exhibits low moisture absorption, excellent chemical resistance and excellent electrical properties. Amodel® A-6135 HS resin is ideal for automotive electrical and electronic applications, including connectors, sockets, switches and sensors. It is also a good choice for under-hood enclosures that protect critical control systems such as anti-lock brakes, traction control, steering, electronic engine control, transmission and chassis control units. - Natural A-6135 HS NT

Amodel® A-8930 HS is a 30% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with a high heat deflection temperature and very high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. - Black: A-8930 HS BK 328

Amodel® A-8940 HS is a 40% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with a high heat deflection temperature and very high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. - Black: A-8940 HS BK 328 - Natural: A-8940 HS NT

Amodel® A-8950 HS is a 50% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with a high heat deflection temperature and very high tensile strength. Excellent creep resistance, low moisture absorption and glycol resistance are also characteristic of this resin. - Black: A-8950 HS BK 328

Amodel® Supreme A-9933 HS is a 33% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with the highest thermomechanical performance of any PPA on the market. Excellent creep resistance and low moisture absorption are also characteristic of this resin. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: A-9933 HS BK 324

Amodel® Supreme A-9950 HS is a 50% glass-fiber-reinforced, heat-stabilized polyphthalamide (PPA) with the highest thermomechanical performance of any PPA on the market. Excellent creep resistance and low moisture absorption are also characteristic of this resin. Very high mechanical performance at elevated temperatures, high heat deflection temperature, excellent hydrolytic stability, glycol resistance, and chemical resistance make this material an ideal candidate for metal replacement spanning automotive, aerospace, consumer, and industrial applications. - Black: A-9950 HS BK 324

Amodel® AE-1133 HFFR is a 33% glass reinforced, halogen-free, flame-retardant polyphthalamide (PPA) compound with excellent mechanical and electrical properties. It is intended to be corrosion-resistant while in contact with metals and can be used in a variety of electric and electrical applications. - Black: AE-1133 HFFR BK 324

Amodel® AE-1133 is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) designed to work in the modern automotive electrical environment. It has a high heat deflection temperature, high flexural modulus and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. - Black: AE-1133 BK 324 - Natural: AE-1133 NT

Amodel® AE-4133 is a 33% glass reinforced, hot-water moldable polyphthalamide (PPA) designed to work in the modern automotive electrical environment. This grade features a high heat deflection temperature, high flexural modulus and high tensile strength, as well as excellent creep resistance and low moisture absorption. - Black: AE-4133 BK902 - Natural: AE-4133 NT

Amodel® AE-8930 is a 30% glass reinforced polyphthalamide (PPA) designed to work in the modern automotive electrical environment. This grade features a high heat deflection temperature, high flexural modulus and high tensile strength, excellent creep resistance, improved hydrolytic stability, resistance to glycol, and low moisture absorption. - Black: AE-8930 BK938 - Natural: AE-8930 NT

Amodel AE-8935 is a 35% glycol resistant glass-reinforced heat stabilized polyphtalamide (PPA) resin designed to work in the modern automotive electrical environment. It is distinguished by a high heat deflection temperature, high flexural modulus, high tensile strength and low moisture absorbtion. This grade displays excellent resistance to cracks which may occur during thermal shock cycling. - Black: AE-8935 BK902

Amodel® AE-8940 is a 40% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. It has improved hydrolytic stability, exceptional creep resistance, and is resistant to glycol. This grade has been designed to work in the modern automotive electrical environment. - Black: Amodel® AE-8940 BK938 - Natural: Amodel® AE-8940 NT

Amodel® AE-8950 is a 50% glass reinforced polyphthalamide (PPA) designed to work in the modern automotive electrical environment. This grade features a high heat deflection temperature, high flexural modulus and high tensile strength, as well as excellent creep resistance and low moisture absorption. It also has improved hydrolytic stability and is glycol resistant. - Black: AE-8950 BK938