VINPOL EV0105 is a thermally stabilized 5% ethylene vinyl acetate copolymer resin, designed for a wide range of applications requiring good mechanical and sealing properties. Targeted applications include agricultural film, co-extrusion films, form fill and seal (FFS) packaging, freezer film, high clarity film, lamination film, poultry bags, rice bags, rubber bale wrap, and foams. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0118 is a thermally stabilized 18% ethylene vinyl acetate copolymer resin, designed for film applications. It exhibits high transparency, good mechanical properties, and low gel level. Targeted applications include blends, stretch film, stretch hood, and co-extrusion film. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0205 is a thermally stabilized 5% ethylene vinyl acetate copolymer resin, designed for a wide range of applications requiring good mechanical and sealing properties. Targeted applications include agricultural film, co-extrusion films, form fill and seal (FFS) packaging, freezer film, high clarity film, lamination film, poultry bags, rice bags, rubber bale wrap, and foams. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0209 is a thermally stabilized 9% ethylene vinyl acetate copolymer resin, designed for applications requiring superior impact strength and heat sealability. Targeted applications include meat packaging and meat bags. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0214 is a thermally stabilized 14% ethylene vinyl acetate copolymer resin, exhibiting very high impact strength, high clarity and excellent heat sealability. Targeted applications include meat packaging and heat seal layers. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0218 is a thermally stabilized 18% ethylene vinyl acetate copolymer resin exhibiting low melting temperature, good processability and mechanical properties. Targeted applications include foams, shoe soles, injection molding, profile extrusion, films, and compounds. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0218L is an ethylene vinyl acetate copolymer resin with excellent flexibility and low temperature properties. Applications include blown and cast film converted medium to heavy gauge film for bags and pouches, lamination and sealants and specialty films. Also, it is used in carpet backing, Wire and Cable applications and injection and blow molding parts. This grade contains no slip or antiblock.

VINPOL EV0303 is a 3 wt. % vinyl acetate copolymer. The vinyl acetate content of this resin provides good heat sealing and good cold temperature toughness when compared to LDPE homopolymers. This product contains 800 ppm Slip, 2,500 ppm Antiblock, and thermal stabilizer. Typical applications include carpet backing, co-extrusion films, foams, form-fill-seal packaging, freezer film, high clarity and lamination film.

VINPOL EV0318 is a thermo-stabilized 18% ethylene vinyl acetate copolymer resins exhibiting low melting temperature, excellent processability and mechanical properties. Targeted applications include foams, shoe soles, injection molding, profile extrusion, and compounds. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0414 is a thermo-stabilized 14% ethylene vinyl acetate copolymer resin. Articles made from this resin exhibit very high impact strength, high clarity and excellent heat sealability. Targeted applications include meat packaging and heat seal layers. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0422 is a thermally stabilized 22% ethylene vinyl acetate copolymer resin, designed for specialty extrusion and compounding applications. Articles made from this resin are soft and have excellent low temperature toughness. Targeted applications include foams and extruded profiles. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0514 is a thermally stabilized 14% ethylene vinyl acetate copolymer resin exhibiting very high impact strength, high clarity, and excellent heat sealability. Targeted applications include meat packaging and heat seal layers. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV0628 is a 28% vinyl acetate copolymer (EVA) with higher viscosity and geared toward use in hot melt adhesives and films. This product contains a pellet handling additive for improved pellet flow.

VINPOL EV15028 is a 28% vinyl acetate copolymer (EVA) with low viscosity and geared toward hot melt adhesives. This product contains a pellet handling additive for improved pellet flow.

VINPOL EV1528 is a thermally stabilized 28% ethylene vinyl acetate copolymer resin, designed for a variety of applications, and exhibits high transparency and excellent processing properties. Targeted applications include solar encapsulant sheet, hot melt adhesive, and compounding. This product is not intended for use in medical applications and should not be used in any such applications. Please contact your VPA representative for potential food contact application compliance.

VINPOL EV2528 Series are high vinyl acetate copolymers for specialty compounding applications and hot melt adhesives. This product is not intended for use in medical applications and should not be used in any such applications. This product is available with and without thermal stabilizer.

VINPOL EV2528W is a 28% vinyl acetate copolymer (EVA) with intermediate viscosity and geared toward modifying hot melt adhesives and providing a base layer for compounding applications. This product contains a pellet handling additive for improved pellet flow.

VINPOL HD000649 is a high molecular weight High Density Polyethylene blown film grade resin. This product exhibits excellent toughness and impact performance as well as high stiffness. It is recommended for films less than 0.5 mil in thickness. This product contains no slip or antiblock. Applications include blown film produce bags, grocery sacks, merchandise bags, institutional trash can liners and consumer trash bags.

VINPOL HD000651 is a high molecular weight High Density Polyethylene blown film grade resin. This product exhibits excellent toughness and impact performance as well as high stiffness. It is recommended for films less than 0.5 mil in thickness. This product contains no slip or antiblock. Applications include blown film produce bags, grocery sacks, merchandise bags, institutional trash can liners and consumer trash bags.

VINPOL HD00345 is a high density polyethylene designed for blow molding applications requiring high stress crack resistance and impact performance. Typical applications include agricultural product containers, household and industrial chemical containers, and food and pharmaceutical packaging. This product has NSF and UL compliance (contact your VPA customer service representative for more information.

VINPOL HD00348 is a high performance copolymer designed for non-pressure pipe applications, including conduit, telecommunications and drip irrigation pipe. This grade has good long-term hoop strength performance and outstanding toughness including at low temperatures. It has an excellent balance of stiffness and processability in conduit pipe applications. It meets the requirements of ASTM F2160, UL651A and NEMA TC-7, as well as meeting a minimum ASTM D3350 Cell Classification of 335430A.

VINPOL HD00354 Series is a high density polyethylene (Phillips process). Designed for blow molding applications requiring high stiffness and stress crack resistance. Also usable as a sheet extrusion and thermoforming resin. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00354BF is a high density polyethylene (Phillips process) polymer designed for blown film applications requiring high stiffness. This resin is also well suited as a sheet extrusion and thermoforming resin. It meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00355 is a high density polyethylene (Gas Phase) product. Designed for blow molding applications requiring high stiffness and stress crack resistance. Also usable as a sheet extrusion and thermoforming resin. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00363BF is a medium molecular weight, high density polyethylene homopolymer used for blown film and thin gauge sheet/thermoformed applications where high stiffness and barrier performance are important, such as in food packaging. It meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00445 is a medium molecular weight high density copolymer with a narrow molecular weight distribution with good organoleptic properties. This product has very low gel content and is designed for blown film, monofilament, slittape and high-speed orientation processes. Typical applications include specialty films, bags and pouches, raffia/tapes/strapping, packaging of agricultural products, protective netting for agricultural and building markets as well as netting for food applications.

VINPOL HD00453R is a high density polyethylene exhibiting good stiffness and environmental stress crack resistance. This product contains stearate as a core rod release for the injection-blow molding process. Typical applications include bottles for household chemicals, food and personal care products. The base resin in this product meets the FDA requirements stipulated in 21 CFR 177.1520(a)(3)(i) and (c)3.2a. This product may also contain adjuvant substances that may be safely used in polymers used for the manufacture of articles that come into direct contact with food meeting the requirements of 21 CFR 177.1520(b). This product may only be used in conditions of use B-H and temperatures at or below 212°F, as described in Table 2 or 176.170(c).

VINPOL HD00763 is a high density polyethylene homopolymer used for blow molding applications where clarity and barrier properties are important, such as for food grade bottles and containers. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00763BF is a high density polyethylene homopolymer used for blown film applications where clarity and barrier properties are important, such as for food packaging. This grade meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD00763F is a high density polyethylene homopolymer suitable for blown film applications where stiffness and barrier properties are important. This product meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD0252 is a high density polyethylene designed for injection and compression molding with an excellent balance of stiffness, toughness, organoleptics and environmental stress crack resistance. It is a top choice for caps and closures and collapsible tubes for water, CSD and other food and non-food products.

VINPOL HD02558 is an injection molding grade high density polyethylene homopolymer exhibiting warp resistance, excellent toughness, stiffness and color. This product has low odor and good processing stability. Typical applications include rigid packaging, safety equipment such as hard hats, hardware items and heavy wall molding parts

VINPOL HD04553 is a high density polyethylene copolymer with a narrow molecular weight distribution. It offers high impact strength, stress crack resistance, good color, processability and low odor. Applications include injection molded, open head pails, shipping containers and drum lids. This product complies with FDA 21 CFR 177.1520 for food contact applications listed under conditions of use A - H in 21 CFR 176.170 (c), Table 2, and can be used in contact with all food types as listed in 21 CFR 176.170(c), Table 1.

VINPOL HD04847 is a butene copolymer high density polyethylene copolymer suitable for injection molding applications. It has a combination of excellent stiffness, good impact resistance and low warpage. It also has an elevated level of processing antioxidant. This product complies with U.S. Food and Drug Administration as specified in 21 CFR 177.1520, para. (c) 3.2a, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD05553 is a high density polyethylene copolymer suitable for injection molding applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD05849 is a narrow molecular weight distribution high density polyethylene copolymer. This resin exhibits excellent impact stretch while maintaining good stiffness, and is suitable for a variety of industrial applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL HD05H55 is a high molecular weight high density polyethylene copolymer suitable for large part blow molding applications, heavy gauge sheet and thermoformed parts. Applications include food packaging and drums which require excellent stress crack resistance, impact strength and rigidity.

VINPOL HD0646 is a high density polyethylene designed for injection molding with exceptional impact, warp and environmental stress crack resistance as well as enhanced processability. Typical applications include rigid packaging, consumer durables, closures and institutional seating.

VINPOL HD06754 is a high density polyethylene used for injection molding applications. It has excellent process-ability, an outstanding balance of stiffness, cold temperature impact toughness, ESCR and good organoleptic and color properties. It is used in applications, such as bulk food, industrial and lubricant shipping pails, caps and closures, and bins and totes. This resin complies with U.S. Food and Drug Administration (FDA) regulation 21 CFR 177.1520*.

VINPOL HD06H45U is a high molecular weight high density polyethylene copolymer suitable for blow molding applications which require high melt, impact strength, chemical resistance, and ESCR. Contains UV protection additive. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.