VINPOL LB02118 Series is a general purpose butene based LLDPE film grade resin made via gas phase technology. This product has excellent toughness and puncture resistance and meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Typical applications include food packaging, industrial liners, and trash can liners. VINPOL LB2118B is a barefoot version, and VINPOL LB2118C contains medium levels of Slip and Antiblock additives.

VINPOL LB3017 is a linear low density polyethylene resin suitable for cast film that can also be used in a blend to improve processability and film properties. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LB03525 is a butene linear low density polyethylene suitable for cast film applications requiring high stiffness. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Premier LB03525 is a butene linear low density polyethylene suitable for cast film applications requiring high stiffness. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Premier LB03525 is a butene linear low density polyethylene suitable for cast film applications requiring high stiffness. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LB20024G is a granular, butene linear low density polyethylene designed for use as a masterbatch resin with excellent processability and lot to lot consistency. It does not contain Kosher-offending constituent substances. It is compliant with 21 CFR 177.1520 for olefin polymers, para. (c) 3.2a, and may thus be used in the United States as an article or component of an article intended for use in contact with food, without temperature or food-type restrictions, subject to technical suitability.

VINPOL LB20025G Series is a butene linear low density polyethylene resin with good processability. Suitable for blending and for use as a masterbatch base resin. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. It is available as a barefoot resin in pellet (LB20025B) and granular (LB20025BG) forms.

VINPOL LB20025G Series is a butene linear low density polyethylene resin with good processability. Suitable for blending and for use as a masterbatch base resin. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. It is available as a barefoot resin in pellet (LB20025B) and granular (LB20025BG) forms.

VINPOL LB2018BE is an ethylene 1-butene LLDPE designed for the blown film process. Films made from this resin have very good tensile and toughness properties. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LB50026 Series is a butene linear low density polyethylene, intended for use in lids, caps, and containers. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD002519AE is a low density polyethylene, fractional melt blown film resin suitable for heavy duty film requiring high strength and processability. This grade contains 4000 ppm of antiblock additive. Typical applications include agricultural film, construction film, zipper bag film, collation shrink film, pallet shrink filim, and for use as a blend partner. This product meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD002521 is a low density homopolymer used for heavy duty film applications requiring high puncture resistance and impact properties. Applications include fertilizer, peat moss, decorative stone and agricultural and construction materials. This resin also has excellent heat shrink properties. The base resin in this product meets U.S. Food and Drug Administration as specified in 21 CFR 177.1520 (a)(2)(i) and (c)2.2. It also meets FDA criteria in 21 CFR 177.1520 for food contact applications including cooking, listed under conditions of use A through H in 21 CFR 176.170(c), Table 2, and can be used in contact with all food types as listed in 21 CFR 176.170(c), Table 1.

VINPOL LD00319 is a low density fractional melt blown film resin suitable for heavy duty film requiring high strength and processability. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD00322 is a high molecular weight, low density polyethylene blown film resin suitable for heavy duty film requiring high strength and processability. This product processes well in conventional extruders with low energy consumption and is capable of producing film with good dimensional control. It meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD00322F is a low density polyethylene exhibiting medium optical properties in film. This resin is formulated without slip and antiblock for use in high performance film applications offering excellent extrusion processing and outstanding melt strength characteristics suitable for thick film gauges and large lay flat widths. It meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD00724 Series are low density polyethylene film resins suitable for shrink wrap applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD01119 Series is a homopolymer low density polyethylene resin designed for industrial film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD01119 Series is a homopolymer low density polyethylene resin designed for industrial film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02021 Series is a low density polyethylene blown film grade that is suitable for general purpose clear film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02021 Series is a low density polyethylene blown film grade that is suitable for general purpose clear film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02023 resins are clarity low density polyethylene film resins suitable for blown or cast thin film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02023 resins are clarity low density polyethylene film resins suitable for blown or cast thin film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02023 resins are clarity low density polyethylene film resins suitable for blown or cast thin film applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD02025 Series is a low density polyethylene blown film grade that is suitable for applications requiring excellent optics, bubble stability, processability and higher modulus. Blown and Cast film applications targeted include clarity film, bags, pouches, can liners, film wrap, and food packaging & lamination film.

VINPOL LD02329 Series is a medium density polyethylene blown film grade with high stiffness and good clarity. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD04020 Series is a tubular low density polyethylene, designed for extrusion coating and lamination applications. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD0423 Series is a clarity grade, low density polyethylene with a 900ppm Slip and 1,200ppm Antiblock additive package. It offers a good balance of optical and draw-down performance with excellent extrusion processability. Typical applications include cast film, high clarity film, laundry film, produce bags, profile extrusion and zipper bags.

VINPOL LD06520 Series is a low density polyethylene homopolymer, suitable for thin film applications such as garment bags. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD07018 is a general purpose LDPE extrusion coating grade designed for high speed coating in flexible packaging applications including laminating and aseptic packaging with paper, foil, cellophane, polyester film and other base stocks. This product has excellent adhesion, heat seal and low neck-in performance. This product meets requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520 and 21 CFR 176.170, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD07515 is a general purpose LDPE extrusion coating grade designed for flexible packaging applications. It offers low neck-in, good adhesion and heat sealability for high speed FFS applications (high seal speeds and low seal initiation temperatures). This product meets requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD09519 is a low density polyethylene resin designed for masterbatch blending or injection molding. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

VINPOL LD10018 is a LDPE extrusion coating/injection molding grade designed for flexible packaging applications such as sugar pouches, industrial and multi-wall bags, treated and primed films and laminations. Other applications include caps and closures, and color concentrates. This product offers high speed extrusion coating at speeds exceeding 1,500 fpm with minimal neck-in.

VINPOL LD12515 is an autoclave LDPE extrusion coating grade resin designed for high speed coating applications with good drawdown. The high melt index and lower density of this resin allows for good seals at low temperatures resulting in high packaging/sealing rates. This resin has paper and paperboard adhesion and provides a good moisture barrier. This resin is Kosher and FDA 21 CFR 177.1520 compliant.

VINPOL LD2619 is a high flow, low density polyethylene homopolymer resin offering excellent processability, flexibility and surface appearance. This barefoot (no antiblock, slip or thermal stabilizer) resin is optimal in injection molded housewares, caps and closures and as a masterbatch base resin in compounding applications. It also is well suited for food packaging containers, houseware articles and labware applications.

VINPOL LH00240 is a medium density ethylene-hexene copolymer, blown film grade with high stiffness and shrink along with good optical properties. Excellent bubble stability leads to high output capability in monolayer and coextruded films. Applications include collation shrink, compression packaging, lamination film and multilayer packaging film. This product is TNPP-free.

VINPOL LH00535 is a medium density ethylene 1-hexene copolymer offering excellent processing and tensile, impact and puncture film properties. This combination of properties position this resin as a high pressure LDPE replacement, but with superior drawdown and toughness. This product can also be employed in medium and high density Wire and Cable (W&C) jacketing. It has a good combination of mechanical strength, abrasion and ESCR performance. Sufficient carbon black or UV stabilizer should be added to meet cable jacketing applications. Applications include food packaging, lamination film, multilayer packaging film, shrink film, form fill and seal packaging and heavy-duty bags. W&C applications include communications cable, high, medium and low voltage jacketing.

VINPOL LH00825 Series is a series of linear low density hexene copolymer resins with increased stiffness, tensile and toughness properties suitable for use in demanding packaging applications. Typical applications include freezer film, grocery sacks, heavy duty bags and merchandise bags. The series contains process aid for ease of extrusion and can be blended with LDPE for strength property enhancements.

VINPOL LH00825 Series is a series of linear low density hexene copolymer resins with increased stiffness, tensile and toughness properties suitable for use in demanding packaging applications. Typical applications include freezer film, grocery sacks, heavy duty bags and merchandise bags. The series contains process aid for ease of extrusion and can be blended with LDPE for strength property enhancements.

VINPOL LH00938 is a medium density ethylene 1-hexene copolymer offering excellent extrusion processing and tensile, modulus impact and puncture film properties. This product can also be employed in medium and high density Wire and Cable (W&C) jacketing. It has a good combination of processability with mechanical strength, abrasion and ESCR performance. Sufficient carbon black or UV stabilizer should be added to meet cable jacketing applications. Applications include bread bags, hygiene film, lamination film, compression packaging Lami-tubes and monfilament. W&C applications include communications cable, high, medium and low voltage jacketing.

VINPOL LH01019 is a hexene linear low density polyethylene resin, designed for film applications requiring toughness and strength. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.