Pharmalene BC 82 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent processability and a good balance between ESCR and top load. Pharmalene BC 82 PH BA is suitable for the production of blow molded bottles, flacons and monodoses. Sustainability The "bio attributed" product Pharmalene BC 82 PH BA is highly sustainable medical grade HDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene BC 82 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene BC 82 PH BA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The production of Pharmalene BC 82 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sourses (e.g. vegetable oils). Pharmalene BC 82 PH BA will be bio attributed for 95%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene BC 82 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent processability and a good balance between ESCR and top load. Pharmalene BC 82 PH BCA is suitable for the production of blow molded bottles, flacons and monodoses. Sustainability The "bio attributed" product Pharmalene MS 20 PH BA is a highly sustainable medical grade LLDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodolgy that sllows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 20 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 20 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sourses (e.g. vegetable oils). Pharmalene MS 20 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate ussed upon delivery of the product.

Pharmalene BC 82 PH is an high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blow moulding. Main Application Pharmalene BC 82 PH is intended for the use within pharmaceutical sector and is characterized by excellent processability and a good balance between ESCR and top load. Pharmalene BC 82 PH is suitable for the production of blow molded bottles, flacons and monodoses.

Pharmalene FC 20 PH BA is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH BA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses. Sustainability The "bio attributed" product Pharmalene FC 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FC 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FC 20 PH BA is a low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrustion, extrustion, and extrusion, blown moulding. The production of Pharmalene FC 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene FC 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FC 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH BCA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses. Sustainability The product Pharmalene FC 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FC 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FC 20 PH BCA is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene FC 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FC 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FC 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrusion, extrusion and extrusion blow moulding. Main Applications Pharmalene FC 20 PH is intended for the use within pharmaceutical sector and is characterized by high swell, good melt strength and excellent mechanical properties. Pharmalene FC 20 PH is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses.

Pharmalene FF 55 PH BA is intended for the use within pharmaceutical sector and is characterized by high flexibility and good impact resistance. Pharmalene FF 55 PH BA is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications. Sustainability The "bio attributed" product Pharmalene FL 55 PH BA is highly sustainable medical grade EVA produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 55 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 55 PH BA is ehylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The production of Pharamlene FL 55 PH BA allows to contibute to the circular economy, since the bionaphtha uses derives from renewable sourses (e.g. vegetable oils). Pharmalene FL 55 PH BA will be bioattributed for 81%. The exact amount of "bio attribued" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FF 55 PH BCA is intended for the use within pharmaceutical sector and is characterized by high flexibility and good impact resistance. Pharmalene FF 55 PH BCA is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications. Sustainability The product Pharmalene FL 55 PH BCA 'Bio circular attributed' is a highly sustainable medical grade EVA produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 55 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 55 PH BCA is an ethylene vinyl acetat copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The product of Pharmalene 55 FL PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 55 PH BCA will be bio circular attributed for 81%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FF 55 PH is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). Main Applications Pharmalene FF 55 PH is intended for the use within pharmaceutical sector and is characterized by high flexibility and good impact resistance. Pharmalene FF 55 PH is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications.

Pharmalene FL 20 PH BA is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH BA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles. Sustainability The "bio attributed" product Pharmalene FL 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 20 PH BA is a low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extrustion, extrustion, and extrusion, blown moulding. The production of Pharmalene FL 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene FL 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH BCA is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles. Sustainability The product Pharmalene FL 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 20 PH BCA is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene FL 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 20 PH is a low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for blown film extrusion, extrusion and extrusion blow moulding. Main Applications Pharmalene FL 20 PH is intended for the use within pharmaceutical sector and is characterized by an optimal balance between processability and mechanical properties. Pharmalene FL 20 PH is suitable for the production of multilayer films for blisters and for pharmaceutical monodoses or small bottles.

Pharmalene FL 35 PH BA is intended for the use within pharmaceutical sector and is characterized by good stretchability and sealability. Pharmalene FL 35 PH BA is suitable for the production of transdermal patches and other TTS applications or can be used for injection molded articles for healthcare applications. Sustainability The "bio attributed" product Pharmalene FL 35 PH BA is highly sustainable medical grade EVA produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 35 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 35 PH BA is ehylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The production of Pharamlene FL 35 PH BA allows to contibute to the circular economy, since the bionaphtha uses derives from renewable sourses (e.g. vegetable oils). Pharmalene FL 35 PH BA will be bioattributed for 91%. The exact amount of "bio attribued" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 35 PH BCA is intended for the use within pharmaceutical sector and is characterized by good stretchability and sealability. Pharmalene FL 35 PH BCA is suitable for the production of transdermal patches and other TTS applications or can be used for injection molded articles for healthcare applications. Sustainability The product Pharmalene FL 35 PH BCA 'Bio circular attributed' is a highly sustainable medical grade EVA produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 35 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 35 PH BCA is an ethylene vinyl acetat copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The product of Pharmalene FL 35 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 35 PH BCA will be bio circular attributed for 91%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 35 PH is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). Main Applications Pharmalene FL 35 PH is intended for the use within pharmaceutical sector and is characterized by good stretchability and sealability. Pharmalene FL 35 PH is suitable for the production of transdermal patches and other TTS applications or can be used for injection molded articles for healthcare applications.

Pharmalene FL 45 PH BA is intended for the use within pharmaceutical sector and is characterized by good optical properties and by good elasticity and sealability. Pharmalene FL 45 PH BA is suitable for the production of flexible medical packaging, gaskets for medical applications or can be used for medical tubing applications. Sustainability The "bio attributed" product Pharmalene FL 45 PH BA is highly sustainable medical grade EVA produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 45 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 45 PH BA is ehylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The production of Pharamlene FL 45 PH BA allows to contibute to the circular economy, since the bionaphtha uses derives from renewable sourses (e.g. vegetable oils). Pharmalene FL 45 PH BA will be bioattributed for 86%. The exact amount of "bio attribued" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 45 PH BCA is intended for the use within pharmaceutical sector and is characterized by good optical properties and by good elasticity and sealability. Pharmalene FL 45 PH BCA is suitable for the production of flexible medical packaging, gaskets for medical applications or can be used for medical tubing applications. Sustainability The product Pharmalene FL 45 PH BCA 'Bio circular attributed' is a highly sustainable medical grade EVA produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 45 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 45 PH BCA is an ethylene vinyl acetat copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The product of Pharmalene 45 FL PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 45 PH BCA will be bio circular attributed for 86%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 45 PH is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). Main Applications Pharmalene FL 45 PH is intended for the use within pharmaceutical sector and is characterized by good optical properties and by good elasticity and sealability. Pharmalene FL 45 PH is suitable for the production of flexible medical packaging, gaskets for medical applications or can be used for medical tubing applications.

Pharmalene FL 65 PH BA is intended for the use within pharmaceutical sector and is characterized by a high flexibility, good optical properties and as well excellent sealing properties. Pharmalene FL 65 PH BA is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications. Sustainability The "bio attributed" product Pharmalene FL 65 PH BA is highly sustainable medical grade EVA produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 65 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 65 PH BA is ehylene vinyl acetate copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The production of Pharamlene FL 65 PH BA allows to contibute to the circular economy, since the bionaphtha uses derives from renewable sourses (e.g. vegetable oils). Pharmalene FL 65 PH BA will be bioattributed for 72%. The exact amount of "bio attribued" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 65 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high flexibility, good optical properties and as well excellent sealing properties. Pharmalene FL 65 PH BCA is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications. Sustainability The product Pharmalene FL 65 PH BCA 'Bio circular attributed' is a highly sustainable medical grade EVA produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene FL 65 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene FL 65 PH BCA is an ethylene vinyl acetat copolymer (EVA) for blown film extrusion, extrusion & injection moulding, manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). The product of Pharmalene 65 FL PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene FL 65 PH BCA will be bio circular attributed for 72%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene FL 65 PH is an ethylene vinyl acetate copolymer (EVA) for extrusion & blown film extrusion manufactured using high pressure tubular technology. It is produced according to good manufacturing practices (GMP). Main Applications Pharmalene FL 65 PH is intended for the use within pharmaceutical sector and is characterized by a high flexibility, good optical properties and as well excellent sealing properties. Pharmalene FL 65 PH is suitable for the production of flexible medical packaging, medical bags or can be used for medical tubing applications.

Pharmalene ML 70 PH BA is intended for the use within pharmaceutical sector and is characterized by high impact and creep resistance as well as a good ESCR. Pharmalene ML 70 PH BA is suitable for the production of caps & closures. Sustainability The "bio attributed" product Pharmalene ML 70 PH BA is highly sustainable medical grade HDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene ML 70 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene ML 70 PH BA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The production of Pharmalene ML 70 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sourses (e.g. vegetable oils). Pharmalene ML 70 PH BA will be bio attributed for 95%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene ML 70 PH BCA is intended for the use within pharmaceutical sector and is characterized by high impact and creep resistance as well as a good ESCR. Pharmalene ML 70 PH BCA is suitable for the production of caps & closures. Sustainability The product Pharmalene ML 70 PH BCA 'Bio circular attributed' is a highly sustainable medical grade HDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene ML 70 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene ML 70 PH BCA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in confomity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The prodcution of Pharmalene ML 70 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene ML 70 PH BCA will be bio attributed for 95%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene ML 70 PH is a high density polyethylene (HDPE, C6-comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene ML 70 PH is intended for the use within pharmaceutical sector and is characterized by high impact and creep resistance as well as a good ESCR. Pharmalene ML 70 PH is suitable for the production of caps & closures.

Pharmalene MP 20 PH BA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 20 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. The production of Pharmalene MP 20 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 20 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH BCA is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 20 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for blown film extursion, extrusion and extrusion blown moulding. The production of Pharmalene MP 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 20 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 20 PH is a medium fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and extrusion coating. Main Application Pharmalene MP 20 PH is intended for the use within pharmaceutical sector and is characterized by high flexibility, excellent organoleptic properties and medium flowability. Pharmalene MP 20 PH is suitable for the production of flexible medical packaging, pharmaceutical masterbatches and caps & closures.

Pharmalene MP 30 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 30 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BA is a medium fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 30 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH BCA is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MP 30 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 30 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 30 PH BCA is a medium fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 30 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 30 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 30 PH is a medium fluidity homopolymer low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 30 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 30 PH is recommended for high gloss surface and medium thickness articles. Pharmalene MP 30 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MP 31 PH BA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BA is suitable for the production of syringes and caps & closures. Sustainability The "bio attributed" product Pharmalene MP 31 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BA is a medium fluidity low density polyethylene (LDPE) addivated with slip agent and anti-block obtained by high pressure autoclave process.. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MP 31 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH BCA is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH BCA is suitable for the production of syringes and caps & closures. Sustainability The product Pharmalene MP 31 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 31 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 31 PH BCA is a medium fluidity low density polyethylene (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding. The production of Pharmalene MP 31 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 31 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 31 PH is a medium fluidity low density polyethylene resin (LDPE) additivated with slip agent and anti-block obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 31 PH is intended for the use within pharmaceutical sector and is characterized by a good balance between flowability and rigidity. Pharmalene MP 31 PH is suitable for the production of syringes and caps & closures.

Pharmalene MP 90 PH BA is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH BA is suitable for the production of caps & closures. Sustainability The "bio attributed" product Pharmalene MP 90 PH BA is highly sustainable medical grade HDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 90 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 90 PH BA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The production of Pharmalene MP 90 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sourses (e.g. vegetable oils). Pharmalene MP 90 PH BA will be bio attributed for 95%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 90 PH BCA is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH BCA is suitable for the production of caps & closures. Sustainability The product Pharmalene MP 90 PH BCA 'Bio circular attributed' is a highly sustainable medical grade HDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MP 90 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MP 90 PH BCA is a high density polyethylene (HDPE, C-6 comonomers) with antioxidants, obtained by gas phase technology. It is produced in confomity to the good manufacturing practices (GMP) and is mainly used for extrusion and extrusion blown moulding. The prodcution of Pharmalene MP 90 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MP 90 PH BCA will be bio attributed for 95%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MP 90 PH is a homopolymer high density polyethylene (HDPE) with antioxidants produced by gas phase process. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MP 90 PH is intended for the use within pharmaceutical sector and is characterized by an excellent balance between processability and mechanical properties as well as creep resistance. Pharmalene MP 90 PH is suitable for the production of caps & closures.

Pharmalene MR 10 PH BA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MR 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MR 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MR 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MR 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MR 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MR 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MR 10 PH is intended for the use within pharmaceutical sector and is characterized by a high flexibility and a high flowability. Pharmalene MR 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.

Pharmalene MR 50 PH BA is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH BA is suitable for the production thin walled pharmaceutical containers as well as closures. Sustainability The "bio attributed" product Pharmalene MR 50 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 50 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 50 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MR 50 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MR 50 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.