Pharmalene MR 50 PH BCA is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH BCA is suitable for the production thin walled pharmaceutical containers as well as closures. Sustainability The product Pharmalene MR 50 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MR 50 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MR 50 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MR 50 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MR 50 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MR 50 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MR 50 PH is intended for the use within pharmaceutical sector and is characterized by a high rigidity. Pharmalene MR 50 PH is suitable for the production thin walled pharmaceutical containers as well as closures.

Pharmalene MS 20 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH BA is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches. Sustainability The "bio attributed" product Pharmalene MS 20 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 20 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 20 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 20 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MS 20 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MS 20 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH BCA is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches. Sustainability The product Pharmalene MS 20 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 20 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 20 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 20 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MS 20 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MS 20 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MS 20 PH is intended for the use within pharmaceutical sector and is characterized by excellent low temperature properties and by a good flowability. Pharmalene MS 20 PH is suitable for the production of pharmaceutical containers, closures and pharmaceutical masterbatches.

Pharmalene MS 40 PH BA is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH BA is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches. Sustainability The "bio attributed" product Pharmalene MS 40 PH BA is highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 40 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 40 PH BA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacuring practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 40 PH BA allows to contribute to the circular economy, since the bionaphtha used derives from renewable sources (e.g vegetable oils). Pharmalene MS 40 PH BA will be bio attributed for 90%. The exact amount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MS 40 PH BCA is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH BCA is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches. Sustainability The product Pharmalene MS 40 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LLDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized method that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MS 40 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MS 40 PH BCA is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is producedin conformity to the good manufacturing practices (GMP) and is mainly used for Injection moulding. The production of Pharmalene MS 40 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MS 40 PH BCA will be bio circular attributed for 90%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon the delivery of the product.

Pharmalene MS 40 PH is a linear low density polyethylene (LLDPE) with antioxidants, obtained by medium pressure autoclave technology. It is produced in conformity to the good manufacturing practices (GMP) and is mainly used for injection moulding. Main Application Pharmalene MS 40 PH is intended for the use within pharmaceutical sector and is characterized by good impact resistance and rigidity. Pharmalene MS 40 PH is suitable for the production pharmaceutical containers, large - sized injection moulded articles as well as pharmaceutical masterbatches.

Pharmalene MT 10 PH BA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The "bio attributed" product Pharmalene MT 10 PH BA is highly sustainable medical grade LDPE produced using bionaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BA provides the same chemical composition and physical-mechanical performance of the traditional grade in addition is accompaniesd by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BA is a high fluidity low density polyethylene (LDPE) without attitives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BA allows to contribute to the circular economy, since bionaphtha used derives from renewable resources (e.g. vegetable oils). Pharmalene MT 10 PH BA will be bio attributed for 100%. The exact ammount of "bio attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH BCA is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH BCA is suitable for the production of pharmaceutical masterbatches and caps & closures. Sustainability The product Pharmalene MT 10 PH BCA 'Bio circular attributed' is a highly sustainable medical grade LDPE produced using bioaphtha from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product, Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Pharmalene MT 10 PH BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. Pharmalene MT 10 PH BCA is a high fluidity low density polyethylene (LDPE) without additives obtained by high pressure autoclave process. It is manufactured according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. The production of Pharmalene MT 10 PH BCA allows to contribute to the circular economy, since the bionaphtha used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Pharmalene MT 10 PH BCA will be bio circular attributed for 100%. The exact amount of "bio circular attributed" product will be reported in the sustainability certificate issued upon delivery of the product.

Pharmalene MT 10 PH is a high fluidity low density polyethylene (LDPE) without additives, obtained by high pressure autoclave process. It is produced according to good manufacturing practices (GMP) and is mainly used for injection moulding and compounding. Main Application Pharmalene MT 10 PH is intended for the use within pharmaceutical sector and is characterized by excellent flowability. Pharmalene MT 10 PH is suitable for the production of pharmaceutical masterbatches and caps & closures.