SGF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. The minimum biobased carbon content of this grade is 95%, determined according to ASTM D6866. Application: Small automotive tanks, Containers from 2 to 20 L for Household and Industrial Chemicals, Air ducts Process: Extrusion Blow Molding.

SGF495OTT is a copolymer high-density polyethylene without optical brightener in it composition, developed for the blow-molding segment with well-balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Tissue and hygiene packaging, Polymer blends, Cosmetic packaging Processes: Extrusion Blow Molding

SGF4960 is a homopolymer high-density polyethylene, developed for the blow-molding segment with high density and stiffness combined with high impact resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Applications: Blow molding small volumes, Dairy based products packaging, Juice packaging, Food packaging, bottles for ethylic alcohol, toys Processes: Extrusion Blow Molding

SGM9450F is a high-density polyethylene, developed for the high molecular weight film extrusion segment produced with bimodal technology. The film produced from this resin has high tenacity and excellent resistance to impact characteristics. This resin has wide molar mass distribution that makes it easier to process. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Film rolls, Geodesic film Process: Blown Film Extrusion

SHA7260 is a high-density polyethylene, developed for the injection molding, easy to process and with high productivity. This resin has a good melt flow with high rigidity and hardness. Its narrow molar mass distribution results in a low tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Caps, Thin wall parts, Houseware, toys

SHC7260 is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. Organoleptic properties are suitable for water caps applications. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Cosmetic packaging, Caps for water, Caps for non-carbonated or low carbonated soft drinks, toys, pallet Process: Injection Molding.

SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Applications: Pallet, Safety helmet, General use crates, Industrial crates Processes: Injection Molding.

SHD0860 is a high-density polyethylene, developed for injection molding. It presents high hardness and stiffness, besides low tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Caps Processes: Injection Molding

SHD7255LS-L is a high-density polyethylene, developed for the injection molding with good tenacity and impact properties combined with a good stiffness. It presents a radio between melt flow and density that provides excellent mechanical properties. This resin has additives against the action of ultraviolet radiation. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Horticultural Boxes, Fish crates, General use crates, Industrial crates

SHE150 resin is a High Density Polyethylene that has been specially designed for monofilament extrusion process and provides a good balance of processability, spinnability, knotting strength as well as a very low gels amount. It can also be blended with LLDPE to improve blown film stiffness. It contains processing aid and antioxidant additives. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866. Application: Film, Ropes, Shading nets, Raschel Process: Extrusion of Monofilaments

SLD2000T is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Caps, Masterbatches Processes: Compounds and Masterbatches, Injection Molding

SLD4004 is a high pressure low density polyethylene (LDPE). It offers a good balance between mechanical properties and processability. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Blow molded parts; Extrusion films; Foaming sheets. Processes: Blown Film Extrusion, Extrusion Blow Molding

SLH0820/30AF is a LLDPE hexene copolymer produced by Braskem. It offers outstanding processability combined with excellent mechanical properties. Very low gel amount. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Additive: Processing Aid, Antiblocking. Applications: Industrial Sacks, Blends with HDPE, Blends with LDPE, Laminates, Bags with valve Process: Blown Film Extrusion

SLH118/21 is a Linear Low Density Polyethylene developed for tubular blown film extrusion. Films obtained with this product show good processing performance balanced with good optical and elongation properties, as well as very low gel amount. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Additives: Slip, Antiblock Applications: Blends with HDPE, General use packing, Blends with LDPE, Technical films, Technical films for automatic packaging Process: Blown Film Extrusion

SLH118 is a Linear Low Density Polyethylene developed for blown film extrusion. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains an oxidant additives. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866 Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown film extrusion.

SLH218 is a LLDPE Hexene copolymer produced by Braskem. It shows a good balance between optical properties, mechanical properties (Mainly stretchability), sealability and processability. Very low gel contained. The minimum biobased carbon content of this grade is 84%, determined according to ASTM D6866. Applications: Blends with HDPE, Stretch Films, Medium voltage XLPE insulation, Liners, Flexible Packaging (Cast Films)., Blends with LDPE, General use packing, Blends for irrigation pipes, Low voltage XLPE insulation, Wire insulation Process: Cast Film Extrusion, Blown Film Extrusion

SLL118/21 is a LLDPE Butene copolymer produced by Braskem. It was specially designed to provide outstanding processing performance. Films obtained with this grade show good physical and optical properties and enhanced sealability. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Additive: Slip, Antiblock. Applications: Blends with HDPE, Blends with LDPE, Technical films for automatic packaging, Technical films, Liners Process: Blown Film Extrusion

SLL118 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains an oxidant additives. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Industrial Sacks, Blends with LDPE, Stretch Films, Flexible Packaging (Tubular Films), Liners, General use packing, Blends for irrigation pipes Process: Blown film extrusion.

Description: SLL218/21 is a LLDPE Butene copolymer produced by Braskem. It was specially designed to provide outstanding processing performance. Films obtained with this grade show good physical and optical properties and enhanced sealability. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Blends with LDPE, Liners, Roll films for automatic packaging Process: Blown Film Extrusion, Extrusion Blow Molding

Description: SLL218 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show a good processing performance balanced withgood optical and mechanical properties as well as processability. Very low gel amount. It contains antioxidant additives. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Blends with LDPE, General use packing, Liners, Stretch Films Process: Cast film extrusion

SLL318 is a Linear Low Density Polyethylene, copolymer of butene-1. Developed for cast film extrusion. Films obtained with this product show good mechanical properties and enhanced sealability. It contains an oxidant additives. The minimum biobased carbon content of this grade is 87%, determined according to ASTM D6866. Applications: Blends with HDPE, Stretch Films, Medium voltage XLPE insulation, Liners, General use packing, Blends for irrigation pipes, Blends with LDPE, Low voltage XLPE insulation, Wire insulation Process: Cast film extrusion

SLL5405S is a LLDPE Butene copolymer produced by Braskem. It is a general purpose product that shows a good processing performance balanced with good mechanical properties as well as sealability. This product has very low gel amount. The minimum biobased content of this grade is 87%, determined according to ASTM D6866. Additives: Slip, Antiblocking. Applications: Film Processes: Blown Film Extrusion

SPB208 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Masterbatches. Covers and injected parts with large flat area.

SPB608 is a low density polyethylene designed for injection molding. This grade shows excellent processability being indicated for applications where low viscosity is required during processing. Injection molded products with this resin shows good flexibility. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Caps, Masterbatches Processes: Injection molding.

SPB681/59 is a low density polyethylene produced under high pressure technology. Films obtained with this product show excellent 'draw down', good sealability and adhesion on paper substrates and low gel content. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Antiblock, Slip. Applications: Laminates, Packing for solid products, Automatic packaging Process: Blown Film Extrusion.

SPB681 is a low density polyethylene developed for film extrusion. This resin has outstanding processability, which provides excellent stability to produce thin films. Films produced with this resin have exceptional optical properties. The minimum carbon biobased content for this grade is 95%, determined according to ASTM D6866. Applications: LLDPE and Blends with HDPE Process: Cast Film Extrusion, Blown film extrusion.

STN7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides STN7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Liquid food packaging, Packing for solid products, Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, Flexible packaging., Food packaging, Tissue and hygiene packaging, Flat films for tablecloths, curtains and laminated fabrics, Bottles Processes: Blown Film Extrusion

STS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides STS7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Antiblocking, Slip agent. Applications: Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, High transparency films Process: Blown Film Extrusion.

TN7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides TN7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. Application: Bottles, Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products, Flat films for tablecloths, curtains and laminated fabrics, Flexible packaging, Liquid food packaging, Packing for solid products, Tissue and hygiene packaging

TS7003 is a low density polyethylene (LDPE) with high molecular weight that offers high mechanical strength and toughness even at low temperatures. Additionally, this product is easily processed. The product was developed to meet the requirements for automatic packaging. The additive package provides low coefficient of friction - COF, allowing high productivity on the packaging lines. This product is identified as PE 115 according to ASTM D-4976-04a standard specification. Application: Flexible packaging

TS7006 is a low-density polyethylene (LDPE) specially developed for coextruded films and lamination. The resin presents a great combination among mechanical, optical and stiffness properties. Besides TS7006 has low gels content which ensure a production of excellent appearance films. This product is identified as PE 114 according to ASTM D-4976-04a standard specification. Additives: Antiblocking, Slip agent Application: Coextruded packaging for food products, such as: cheeses, meats, sausages and sliced products

TS9022 is a low density polyethylene (LDPE), developed specially for automatic overwrap packaging. This resin has a combination of high optical properties and excellent stiffness. The incorporated additive package consists of an antiblocking agent in high level and a slip agent in medium level, to guarantee a low coefficient of friction (COF), which fundamental for improved machineability in overwrap applications. This product is identified as PE 123 according to ASTM D- 4976-04a standard specification. Additivation: Antiblocking agent Slip agent Application: Flexible packaging (BOPP), Food packaging, Laminates, Packaging that requires greater stiffness and good optical properties, Tissue and hygiene packaging

TX7001 is a low-density polyethylene (LDPE) with high molecular weight, designed to satisfy those applications that require high mechanical strength and environmental stress cracking resistance (ESCR), together with good processability, proper of branched polyethylene produced by a highpressure process. TX7001 resin presents an excellent performance in conventional LDPE extruders, granting low energy consumption during the whole process and allowing the production of packaging with a good dimensional uniformity and an excellent surface finishing. This product is identified as PE 115 according to ASTM D-4976-04a standard specification.

TX7003 is a low-density, high molecular-weight polyethylene that offers high mechanical strength. The product is highly versatile and can be used in several applications due to its easy processability and high compatibility with other types of polyethylene. TX7003 resin shows excellent performance with conventional extruders and low energy consumption during processing, which allows the production of packages with dimensional uniformity and excellent surface finishing. This product is identified as PE 115 according to ASTM D-4976-04a standard specification. Application: Blends with HDPE, Blends with LLDPE, plastic covers, Roll films for high strength industrial packaging

TX8079 is a low density polyethylene with good mechanical strength. Its characteristics give a high versatility to the product, which can be used in various applications, with ease of processing and high compatibility with other types of polyethylene. Additivation: Does not contain additives Applications: Industrial Sack, Mixtures with LLDPE and/or LDPE for Heat Shrink Films, Heat Shrink Film, Mixes With HDPE Processes: Tubular Film Extrusion

WHI1200 is a high density polyethylene. The narrow molecular weight distribution gives low tendency to deformation. Applications: Plastic containers. Process: Injection Molding.