The resin ML3601U is a Linear Low Density Polyethylene indicated for rotational molding. Technical Characteristics: Good surface finishing Excellent impact resistance Creep Resistance UV and heat stabilization Additives: Weathering resistance UV14 and antioxidants. Applications: Large tanks for water storage, Septic tanks, Storage tanks for chemical and agricultural products, Water tanks

The resin ML3602U is a Linear Low Density Polyethylene indicated for rotational molding. Technical Characteristics: Good surface finishing Excellent processability Standard color for natural parts Excellent balance between stiffness and impact resistance UV and heat stabilization Additives: Weathering resistance UV8 and antioxidants. Applications: Parts with high mechanical resistance, Technical parts

ML440ON is a LLDPE resin butene comonomer especially developed for the rotational molding process in the application of water tank up to 2000L (inclusive). Technical Characteristics: - Good surface finishing - High stiffness - Excellent processability - UV radiation and heat stabilization - Indicated for use on colored pieces Additives: - Weathering resistance UV8 and antioxidants Applications: - Water tanks, General use articles

PB208 is a low density polyethylene with no additives. This grade shows excellent processability being indicated for low viscosity required applications. Injection molded products with this resin show high flexibility. Applications: Bungs, Caps, Flexible injection molded articles, Masterbatches Process: Extrusion, Injection Molding

PB608 is a resin with excellent processability, indicated for low viscosity applications. Injection molded parts with this resin present high flexibility. Applications: Bungs, Caps, Flexible injection molded articles, Masterbatches Process: Extrusion, Injection Molding

PB681/59 is a grade produced under high pressure in a tubular reactor. This resin is used for laminating films mainly on paper substrate. It is also used in the extrusion coating process. Films obtained with this product show excellent optical properties and high draw down ability. Additive: Antiblock, Slip. Applications: Laminates, Automatic packaging for solid products Process: Blown Film Extrusion

The PB681 is a resin produced under high pressure, in tubular reactor. This resin presents excellent 'draw down'(stability to form fine films). The films produced with this resin present excellent optical properties. Applications: Blends with LLDPE, Blends with HDPE Process: Cast film extrusion, Blown Film Extrusion, Injection Molding

PLURIS9300 is a Quateropolymer unique properties, such as high stiffness associated with toughness. It is easier to process than conventional LLDPE with the same melt index and shows very good bubble stability. Films obtained with this product have very low gel values. It contains processing Aid, antioxidant and antiblock additives. Applications: Blends with HDPE, Blends with LDPE, General use packing, Industrial Sacks, Liners Process: Blown Film Extrusion.

Braskem PROXESS2606 is a linear low density polyethylene (LLDPE) produced through metallocene catalyst and recommended to blown film extrusion. Films obtained with this grade exhibits high mechanical strength, better sealing, high transparency and comparable contraction levels. These properties make this product a versatile option for both monolayer and multilayer films. Additives: Antioxidants, Processing Aid Applications: Ice bag, Industrial Sacks, Mortar bag, Sandbag, Shrink film Process: Blown Films Extrusion

PROXESS3310 is a copolymer produced with metallocene catalyst with excellent processability, besides rigidity combined with good mechanical properties. Applications: Technical films, Coextrusion, Films for lamination, General use films Processes: Single Layer Tubular Film Extrusion and Coextrusion

PROXESS1509XP is a copolymer produced with a metallocene catalyst that exhibits excellent processability and has a special additive package that gives greater stability to COF after lamination. Additives: Antioxidant, Slip Agent, Antiblocking, Polymer Processing Aid Applications: Technical Films for Lamination, Technical films for automatic packaging, Coextrusion, Packing for liquid products Process: Blown Films Extrusion

Braskem PROXESS1809 is a copolymer produced through metallocene catalyst that shows excellent processability for blown and cast film extrusion. Applications: Coextrusion, General use films, High performance films, Stretch Films, Technical films for automatic packaging, Technical Films for Lamination Process: Blown Films Extrusion, Cast film extrusion

High density polyethylene RGR 7A2 WE obtained by reverse logistics of post-consumer recycled polymer. The grade RGR 7A2 WE contains 70% of PCR and 30% of sustainable I'm Green resin, available in white colour (Carbon Neutral). Application: Blow molding Processes: Extrusion Blow Molding

RIGEO 4950HS is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO 4950HSM is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO HD1053H is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemical products. Application: Packages up to 60 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO HD1053M is a high density polyethylene, copolymer, developed for blow molding application with excellent impact strength and stiffness. It exhibits excellent stress cracking resistance being suitable for contact with surfactant substances and chemicals. Application: Packages up to 60 liters for domestic, chemical and industrial products Processes: Extrusion Blow Molding

RIGEO HD1954M is a high density polyethylene, copolymer, developed for the blow molding process, presenting high impact resistence and rigidity. Rigeo HD1954M presents excelent stress cracking resistence, being suitable for aplications involving contact with chemichal compounds and surfactants. Applications: Packages up to 20 liters for chemicals, domestic and industrial Processes: Extrusion Blow Molding

RIGEO LUMIOS is a high density polyethylene specially designed to provide high gloss and excellent surface finish for multilayer small blow molded bottles.

The linear low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is transparent. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linar low-density polyethylene RPL 0C1 WE is obtained from reverse logistics of industrial bags and it has a concentration of 100% recycled material. This product color is white. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linear low-density polyethylene RPL 4C2 BL is obtained from reverse logistic of industrial bags and it has a concentration of 55% recycled material. This product color is translucent blue. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

The linear low-density polyethylene RPL 4C5 WE is obtained from reverse logistic of industrial bags and it has a concentration of 55% recycled material. This product color is white. Applications: Industrial Sacks, Liners, Blends with HDPE, Blends with LLDPE, Blends with LDPE, General use packing Process: Blown Films Extrusion, Film Extrusion - General Use

RPL 5A1 NL is a Low Density Polyethylene resin containing 50% Post-Consumer recycled (PCR) LDPE. Its properties are comparable to virgin LDPE resins. Applications: Shrink film. Processes: Blown Film Extrusion

RPL 5C1 NL is a Low Density Polyethylene resin containing 50% Post-Consumer Recycled (PCR) LDPE. Its properties are comparable to virgin LDPE resins and has outstanding optical properties like brightness and transparency. Applications: Flexible packaging, bags and sacks. Processes: Blown Film Extrusion

High density polyethylene RPR 7A2 WE obtained by reverse logistics of post-consumer recycled polymer. Available in predominantly white colour. Application: Rigid Packaging - Blow Molding, Lubricanting oil packaging Processes: Extrusion Blow Molding

S0729 is a low density polyethylene resin with good mechanical properties, high stiffness and improved temperature resistance. Non-additivated. Applications: Pharmaceutical products packaging Processes: Extrusion Blow Molding

S1025 is a low density polyethylene (LDPE) which presents good flexibility and transparency. It is used in blow molding process for production of small and flexible flasks for medical and pharmaceutical goods. Application: Pharmaceutical products packaging Process: Extrusion Blow Molding

S1522 is a low density polyethylene produced in a high-pressure process, which presents good balance between mechanical properties and processability. Applications: General use packing Process: Extrusion Blow Molding, Injection Molding

SBC818 is a low density polyethylene developed for coating process, it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: General use articles, Specialty Film - Extrusion Coating, Masterbatches Processes: Extrusion Coating

Description: SBC818R50 is a low density polyethylene developed for coating process, it presents very good optical properties, low neck-in, good film stability, and good adhesion on porous substrate. Additives free. The minimum carbon biobased content of this grade is 50%, determined according to ASTM D6866. Applications: General use articles, Specialty Film - Extrusion Coating, Masterbatches Processes: Extrusion Coating

SBF0323/12HC is a high molecular weight LDPE produced under high pressure technology. Films obtained with this product show outstanding optical properties, excellent mechanical properties, and good shrinkage. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additivation: Slip, Antiblock. Applications: Shrink film., Technical film for liquid packaging Process: Blown Film Extrusion.

SBF0323HC is a high molecular weight grade produced under high pressure technology. Films obtained with this product show excellent mechanical and optical properties. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Heavy duty bags; agriculture, co extruded and shrink films. Flexible containers for cosmetics and pharmaceutical applications (complies with USP 37).

SEB853/72 is a grade produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel amount. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Additives: Slip, Antiblock. Applications: High transparency films, Automatic packaging

SEB853 is a low density polyethylene produced under high pressure technology. Films obtained with this product show outstanding optical properties, good sealability, and low gel content. Additives free. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Applications: Blends with HDPE, Blends with LLDPE, Low thickness film Process: Cast Film Extrusion

SGD4960 is a high density polyethylene homopolymer especially designed for blow molding processing. It features high density and stiffness combined with high impact resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Application: Bottles for food applications such as dairy products and beverages. Containers for non-food applications such as alcohol, cosmetics and lubricant oils. bottles for ethylic alcohol Process: Extrusion Blow Molding.

SGE7252 is a bimodal High Density Polyethylene specially developed for the manufacturing of caps and closures that require high stress cracking resistance. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Sealants, Caps for non-carbonated or low carbonated soft drinks

SGE7252NS is a bimodal high density polyethylene developed for the manufacturing of caps and closures to carbonated soft drinks. This grade offers a good balance between chemical and mechanical resistance, and good processability. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. Applications: Caps for water, Caps for carbonated soft drinks Processes: Injection molding.

SGE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks with low CO2 content. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. The minimum biobased content of this grade is 94%, determined according to ASTM D6866. Application: Caps for carbonated soft drinks Process: Compression Molding

SGF4950 is a high-density polyethylene copolymer, developed for the blow-molding segment. It shows well balanced properties between impact and stiffness, combined with high environmental stress cracking resistance and processability. The minimum biobased carbon content of this grade is 96%, determined according to ASTM D6866. Application: Tissue and hygiene packaging, Blow molding small volumes, Cosmetic packaging Processes: Compression Molding, Extrusion Blow Molding