Prospector

Hostaform® S 9243 XAP®2 ECO-B

Generic Family: Acetal (POM) Copolymer • Supplied by: Celanese Corporation
Impact modified, low emission
POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.
General Properties

Access the complete datasheet details for Hostaform® S 9243 XAP®2 ECO-B when you create your free account with Prospector. You’ll find complete information on physical, mechanical and hardness specs.

Material Status
Commercial: Active
Documents
UL Yellow Cards

E38860 - CELANESE INTERNATIONAL CORP

Download Document
Availability
Africa & Middle East, Asia Pacific, Europe, Latin America, North America
Uses
Automotive Applications
Processing Method
Injection Molding
Multi-Point Data
  • Isothermal Stress vs. Strain (ISO 11403)
  • Secant Modulus vs. Strain (ISO 11403)
Other Properties
Additive, Features, Agency Ratings, Forms, Density, Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Stress at Yield, Tensile Strain at Yield, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Poisson's Ratio, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Melting Temperature, Coefficient of Linear Thermal Expansion, Flow, Surface Resistivity, Volume Resistivity, Relative Permittivity, Dissipation Factor, Comparative Tracking Index (CTI), Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Rate, Back Pressure
Access 41 properties in Plastics. Create your free account or sign into Prospector.
Processing

Find specific processing information for Hostaform® POM as well as general information for the Acetal (POM) Copolymer generic family. Register or Sign In for more information.

Where To Buy

You can purchase Hostaform® S 9243 XAP®2 ECO-B from 6 distributors or manufacturers. Register or Sign In for more information.

Prospector Sign in / Register
Premium Features
Find UL Yellow Cards
UL Yellow Cards

UL's Yellow Cards are a globally recognized safety and quality guarantee, a certified demonstration of how plastics have met a specific set of performance credentials.

Find UL Yellow Cards

PROSPECTOR

Find solutions, not just materials.

When you join Prospector, you leverage the dynamic tools and features to find solutions fast.

Register Today