Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Density / Specific Gravity, Density, Density, Apparent (Bulk) Density, Apparent (Bulk) Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Molding Shrinkage, Water Absorption @ 24 hrs, Water Absorption 24h/23C, Water Absorption @ Sat., Water Absorption Sat/23C, Water Absorption @ Equil, Water Absorption 23C/50RH, Bound Styrene, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Tensile Strain at Break, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact, Unnotched Izod Impact Strength, Gardner Impact, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (0.45 MPa) Annealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (264 psi) - Annealed, DTUL (1.80 MPa) Annealed, Vicat Softening Temperature, Vicat Softening Temperature, CLTE, Flow, Coefficient of Linear Thermal Expansion, Flow, Thermal Conductivity, Surface Resistivity, Surface Resistivity, Volume Resistivity, Volume Resistivity, Dielectric Strength, Electric Strength, Relative Permittivity, Dissipation Factor, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Gloss, Gloss, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Back Pressure, Screw Speed, Injection Notes, Drying Temperature, Drying Time, Suggested Max Moisture, Cylinder Zone 1 Temp., Cylinder Zone 2 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Cylinder Zone 5 Temp., Adapter Temperature, Melt Temperature, Die Temperature, Extrusion Notes