Commercial: Active

Africa & Middle East, Asia Pacific, Europe, Latin America, North America

Also Available In, Density / Specific Gravity, Density, Melt Mass-Flow Rate (MFR), Melt Mass-Flow Rate (MFR), Melt Volume-Flow Rate (MVR), Mold Shrink, Linear-Flow, Mold Shrink, Linear-Trans, Molding Shrinkage, Water Absorption 24h/23C, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Modulus, Tensile Strength, Tensile Strength at Yield, Tensile Stress at Yield, Tensile Strength at Break, Tensile Stress at Break, Tensile Stress, Tensile Elongation at Yield, Tensile Strain at Yield, Tensile Elongation at Break, Tensile Strain at Break, Nominal Tensile Strain at Break, Tensile Creep Modulus 1000h, Flexural Modulus, Flexural Modulus, Flexural Strength, Flexural Stress, Flexural Strength at Yield, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Notched Izod Impact, Notched Izod Impact Strength, Unnotched Izod Impact Strength, Instrumented Dart Impact, Rockwell Hardness, Rockwell Hardness, Ball Indentation Hardness, DTUL (66 psi) - Unannealed, DTUL (0.45 MPa) Unannealed, DTUL (0.45 MPa) Annealed, DTUL (264 psi) - Unannealed, DTUL (1.80 MPa) Unannealed, DTUL (264 psi) - Annealed, DTUL (1.80 MPa) Annealed, Vicat Softening Temperature, Vicat Softening Temperature, CLTE, Flow (TMA), Coefficient of Linear Thermal Expansion, Flow, CLTE, Transverse (TMA), Coefficient of Linear Thermal Expansion, Transverse, Thermal Conductivity, Surface Resistivity, Volume Resistivity, Electric Strength, Dielectric Constant, Relative Permittivity, Dissipation Factor, Dissipation Factor, Comparative Tracking Index, Burning Rate, Glow Wire Flammability Index, Glow Wire Ignition Temperature, Gloss, Drying Temperature, Drying Time, Suggested Max Moisture, Suggested Shot Size, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Pressure, Back Pressure, Screw Speed, Vent Depth, Injection Notes, Drying Temperature, Drying Time, Cylinder Zone 1 Temp., Cylinder Zone 3 Temp., Cylinder Zone 4 Temp., Adapter Temperature, Melt Temperature, Die Temperature, Extrusion Notes