Home > Plastics > Materials > SABIC® PP > SABIC® PP 510A - Datasheet

SABIC® PP 510A Data Sheet

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
SABIC® PP 510A is a fibre grade with an anti gas fading stabilisation package. SABIC PP 510A is suitable for e.g. wipes and industrial carpets but also for geotextiles with a moderate tenacity.

SABIC® PP 510A is suitable for spinning of coarse staple fibres (both short and long spin), carpet fibres and yarns.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Anti-gas fading
Features 
  • Gas-fading Resistant
  • Homopolymer
  • Medium Isotactic
  • Wide Molecular Weight Distribution
 
Uses 
  • Course Weaving Yarn
  • Filaments
  • Staple Fibers
  • Tape
  • Textile Applications
  • Yarn
Automotive Specifications 
UL File Number 
  • E111275
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Fiber (Spinning) Extrusion
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
1% Secant  2
psi
ASTM D638
--
psi
ISO 527-2/1A/1
Tensile Strength
     
Yield 3
psi
ASTM D638
Yield
psi
ISO 527-2/1A/50
Tensile Elongation
     
Yield 3
%
ASTM D638
Yield
%
ISO 527-2/1A/50
Features
Features may also be described by the following terms: Gas-fading Resistant, Gas Fading Resistant, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, Medium Isotactic, Medium Isotacticity.
Uses
Uses may also be described by the following terms: Course Weaving Yarn, Staple Fibers, Staple Fiber.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): IMDS (1).
Available Documents
Processing - BCF Fiber (English)
Processing - Extrusion (English)
Processing - Sheet Extrusion (English)
Processing - Staple Fiber (English)
Processing - Tape (English)
Technical Datasheet (English)
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
32.0 in/min
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.