Home > Plastics > Materials > UNIVAL™ > UNIVAL™ DMDA-6200 NT 7 - Datasheet

UNIVAL™ DMDA-6200 NT 7 Data Sheet

High Density Polyethylene Resin

Supplied by The Dow Chemical Company

View Complete Data Sheet Search 96000+ Data Sheets
Create Your Free Account!
Product Description
  • Excellent stress crack resistance and rigidity
  • High impact strength
  • Moderate swell
  • High melt strength
  • Complies with:
    • U.S. FDA 21 CFR 177.1520 (c) 3.2a
    • U.S. FDA-DMF
    • Canadian HPFB No Objection (with Limitations)
    • EU, No 10/2011
    • Underwriters Laboratories Inc. (ULI)
    • Consult the regulations for complete details.

UNIVAL™ DMDA-6200 NT 7 High Density Polyethylene (HDPE) Resin is a multipurpose polymer designed for high speed production of blow molded containers used to package household industrial chemicals (e.g., detergents, bleach, fabric softeners), toiletries and cosmetics (e.g., shampoos, creams, lotions, etc.), health and medicinal aids, and food products. In addition, it can be blow molded into other thin walled parts and houseware items, and also can be extruded into profiles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Latin America
  • North America
Agency Ratings 
  •  1
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR)
    ASTM D1238
190°C/2.16 kg
g/10 min
 
190°C/21.6 kg
g/10 min
 
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, F50)
hr
ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
    ASTM D638
Yield
psi
 
Break
psi
 
Tensile Elongation
    ASTM D638
Yield
%
 
Break
%
 
Flexural Modulus - 2% Secant
psi
ASTM D790B
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength 3
ft·lb/in²
ASTM D1822
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Melting Temperature (DSC)
°F
Internal Method
Peak Crystallization Temperature (DSC)
°F
Internal Method
Additional Information
Plaque molded and tested in accordance with ASTM D4976.
Agency Ratings
This plastic material has 5 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DMF (1), EU (1), HPFB (Canada) (1), FDA (1), UL (1).
Available Documents
Technical Datasheet
Notes
1With limitations
2Typical properties: these are not to be construed as specifications.
3Type S
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.