| Product Description | |
|
35% Glass Fiber / Mineral Co-Reinforced, Chemically Coupled, Polypropylene, Black.
|
|
| General | |
|
Material Status
|
|
|
Availability
|
|
|
Filler / Reinforcement
|
|
|
Features
|
|
|
Automotive Specifications
|
|
|
Appearance
|
|
|
Processing Method
|
|
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|
|
ASTM D792 |
|
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Strength 2
|
|
psi
|
ASTM D638 |
|
Flexural Modulus - Tangent
|
|
psi
|
ASTM D790 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Notched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D256 |
|
Gardner Impact
|
|
in·lb
|
ASTM D5420 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Durometer Hardness (Shore D)
|
|
|
ASTM D2240 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load
|
ASTM D648 | ||
|
66 psi, Unannealed
|
|
°F
|
|
|
264 psi, Unannealed
|
|
°F
|
|
| Additional Information |
Nominal Value
|
Unit
|
Test Method
|
|
Reinforcement Content
|
|
%
|
ASTM D5630 |
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: RheTech Polypropylene F49-01, RheTech Polypropylene F4901, RheTech Polypropylene , RheTechPolypropyleneF4901, RheTechPolypropylene, F 49, PolypropyleneF 49 01, PolypropyleneF 49, PolypropyleneF49-01, PolypropyleneF4901, PolypropyleneF49:01, PolypropyleneF49/01, PolypropyleneF49+01, PolypropyleneF49_01, PolypropyleneF49 01, PolypropyleneF49, F 49 01, F49-01, F4901, F49:01, F49/01, F49+01, F49_01, F49 01, F49, 4901, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, RheTech, PolypropyleneUnspecified, PPUnspecified, 49F, 49PolypropyleneF
|
|||
| Generic Name | |||
|
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
|
|||
| Automotive Specifications | |||
|
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): NAVISTAR (1).
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Drying Temperature
|
|
°F
|
|
|
Drying Time
|
|
hr
|
|
|
Suggested Max Moisture
|
|
%
|
|
|
Rear Temperature
|
|
°F
|
|
|
Middle Temperature
|
|
°F
|
|
|
Front Temperature
|
|
°F
|
|
|
Nozzle Temperature
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
|
Injection Pressure
|
|
psi
|
|
|
Holding Pressure
|
|
psi
|
|
|
Back Pressure
|
|
psi
|
|
|
Clamp Tonnage
|
|
tons/in²
|
|
| Injection Notes | |||
|
Cycle Time: Wall Thickness Dependant
Drying is Optional Injection Speed: Variable - Application Dependant Screw recovery 3 seconds before mold opens |
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
| 22.0 in/min |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |