Home > Plastics > Materials > Amodel® > Amodel® AS-1133 HS - Datasheet

Amodel® AS-1133 HS Data Sheet

Polyphthalamide

33% Glass Fiber

Supplied by Solvay Specialty Polymers

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Amodel® AS-1133 HS is a 33% glass reinforced, heat stabilized polyphthalamide (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses greater than 0.125 in (3 mm).

Key properties of this structural resin are high heat deflection temperature, high flexural modulus, high tensile strength, excellent creep resistance and low moisture absorption.

  • Black: AS-1133 HS BK 324
  • Natural: AS-1133 HS NT
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Glass Fiber, 33% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Stiffness
  • Heat Stabilized
  • High Heat Resistance
  • High Strength
  • Low Moisture Absorption
Uses 
  • Automotive Applications
  • Automotive Electronics
  • Automotive Under the Hood
  • Connectors
  • Fuel Lines
  • General Purpose
  • Housings
  • Industrial Applications
  • Industrial Parts
  • Lawn and Garden Equipment
  • Machine/Mechanical Parts
  • Metal Replacement
  • Oil/Gas Applications
  • Power/Other Tools
  • Thick-walled Parts
  • Valves/Valve Parts
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
ISO 1183/B
Molding Shrinkage
      ASTM D955
Flow
in/in
 
Across Flow
in/in
 
Water Absorption (24 hr)
--
%
ASTM D570
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus
       
--
psi
ASTM D638
--
--
psi
ISO 527-2
Tensile Stress
       
Yield
--
psi
ISO 527-2
Break
psi
ASTM D638
Tensile Elongation
       
Break
%
ASTM D638
Break
--
%
ISO 527-2
Flexural Modulus
       
--
psi
ASTM D790
--
--
psi
ISO 178
Flexural Strength
       
--
--
psi
ISO 178
Yield
psi
ASTM D790
Compressive Strength
psi
ASTM D695
Shear Strength
psi
ASTM D732
Poisson's Ratio
--
 
ASTM E132
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
--
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength
--
ft·lb/in²
ISO 179/1eU
Notched Izod Impact
       
--
ft·lb/in
ASTM D256
--
--
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact
--
ft·lb/in
ASTM D256
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (R-Scale)
--
 
ASTM D785
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       
66 psi, Annealed, 0.125 in
--
°F
ASTM D648
264 psi, Annealed, 0.125 in
--
°F
ASTM D648
264 psi, Annealed
--
°F
ISO 75-2/Af
Continuous Use Temperature
      ASTM D3045
-- 2
--
°F
 
-- 3
--
°F
 
Melting Temperature
--
°F
ISO 11357-3, ASTM D3418
CLTE
      ASTM E831
Flow : 32 to 212°F
--
in/in/°F
 
Flow : 320 to 480°F
--
in/in/°F
 
Transverse : 32 to 212°F
--
in/in/°F
 
Transverse : 320 to 480°F
--
in/in/°F
 
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Strength (0.125 in)
V/mil
ASTM D149
Dielectric Constant
      ASTM D150
60 Hz
 
 
1 MHz
 
 
Dissipation Factor
      ASTM D150
60 Hz
 
 
1 MHz
 
 
Arc Resistance
sec
ASTM D495
Comparative Tracking Index (CTI)
V
UL 746
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating 4 (0.125 in)
--
 
UL 94
Optical
Dry
Conditioned
Unit
Test Method
Transmittance 5
      ASTM D1003
1070 nm : 63.0 mil
--
%
 
940 nm : 63.0 mil
--
%
 
Features
Dry
Features may also be described by the following terms: Good Creep Resistance, Creep Resistant, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Strength, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Heat Resistance, Good Stiffness.
Uses
Dry
Uses may also be described by the following terms: Lawn and Garden Equipment, Lawn Equipment, Garden Equipment, Power Tools, Tools, Machine Parts, Mechanical Parts, Machine/Mechanical Parts, Housings, Housing, Industrial Parts, Automotive Applications, Automotive Sector, Valves, Valve Parts, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts, Oil Applications, Gas Applications.
Automotive Specifications
Dry
This plastic material has approval for 13 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (2), SIEMENS (1), ASTM (5), ISO (2), DELPHI (1), BOSCH (2).
Available Documents
Dry
Technical Datasheet
Conditioned
Technical Datasheet
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Hopper Temperature
°F
 
Rear Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
220000 hr
35000 hr
4These flammability ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.
5Transmittance for natural grade
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.