Home > Plastics > Materials > POLYLAC® > POLYLAC® PA-709 - Datasheet

POLYLAC® PA-709 Datasheet

Acrylonitrile Butadiene Styrene

Supplied by CHI MEI CORPORATION

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account! or Login
Product Description
POLYLAC® PA-709 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.

Characteristics include:
  • Flame Rated
  • RoHS Compliant
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
73°F
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR)
    ASTM D1238
200°C/5.0 kg
g/10 min
 
220°C/10.0 kg
g/10 min
 
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     
Yield
psi
ISO 527-2/50
Break
psi
ISO 527-2/50
0,118 in 2
psi
ASTM D638
Tensile Elongation
     
Break, 0,118 in 2
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
0,236 in 3
psi
ASTM D790
-- 4
psi
ISO 178
Flexural Strength
     
0,236 in 3
psi
ASTM D790
-- 4
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength
 
ISO 179
Notched Izod Impact
     
73°F, 0,118 in
ft·lb/in
ASTM D256
73°F, 0,236 in
ft·lb/in
ASTM D256
--
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength
 
ISO 180/1U
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
ASTM D785
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
264 psi, Annealed
°F
ASTM D648
264 psi, Annealed
°F
ISO 75-2/A
Vicat Softening Temperature
     
--
°F
ASTM D1525 5
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0,0630 in)
 
UL 94
Related Terminology
This supplier and product may also be known by these terms: ChiMei
Available Documents
Processing (English)
Technical Datasheet - ASTM (English)
Technical Datasheet - ISO (English)
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
20,24 in/min
30,11 in/min
40,079 in/min
5Rate A (50°C/h)
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.