| Product Description | ||||
|
20% talc filled high impact and low emission PP-Copolymer; good scratch resistance and UV-stability especiality for automotiv interior parts
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Filler / Reinforcement
|
|
|||
|
Features
|
|
|||
|
Processing Method
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
|
|
in³/10min
|
ISO 1133 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus
|
|
psi
|
ISO 527-2/1A/1 |
|
Tensile Stress (Yield)
|
|
psi
|
ISO 527-2/1A/50 |
|
Tensile Strain (Yield)
|
|
%
|
ISO 527-2/1A/50 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength (73°F)
|
|
ft·lb/in²
|
ISO 179/1eA |
|
Charpy Unnotched Impact Strength (73°F)
|
|
|
ISO 179/1eU |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Ball Indentation Hardness (H 358/30)
|
|
psi
|
ISO 2039-1 |
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Heat Deflection Temperature (264 psi, Unannealed)
|
|
°F
|
ISO 75-2/Af |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A50 |
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
ohm
|
IEC 60093 |
|
Volume Resistivity
|
|
ohm·cm
|
IEC 60093 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Burning Rate (0.0787 in)
|
|
in/min
|
ISO 3795 |
|
Flammability Classification
|
IEC 60695-11-10, -20 | ||
|
0.0591 in
|
|
|
|
|
0.118 in
|
|
|
|
| Related Terminology | |||
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FIPP 20 T LE K1832, POLYFORT FIPP 20 T LE K1832, POLYFORT® , POLYFORT, POLYFORTFIPP20TLEK1832, FIPP 20 T LE K 1832, FIPP 20 T LE K1832, FIPP20, 20T, TLE, LEK, K1832, FIPP20TLEK1832, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneCopolymer, PPCopolymer, 20FIPP
|
|||
| Features | |||
|
Features may also be described by the following terms: Scratch Resistant, Resists Scratches, High Impact Resistance, Low Emissions.
|
|||
| Notes |
| 1Typical properties: these are not to be construed as specifications. |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |