Home > Plastics > Materials > INSULCAST® > INSULCAST® 116 FR-FC - Datasheet

INSULCAST® 116 FR-FC Data Sheet

Epoxy; Epoxide

Supplied by ITW Polymers Coatings North America

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
INSULCAST 116 FR-FC is a one to one ratio (weight or volume) epoxy potting and casting compound designed for production use. The convenient mixing ratio makes it ideal for production line mixing as well as automatic dispensing. The INSULCAST 116 FR-FC is among the safest epoxy compounds available. It appreciably reduces the risk of eye, skin or respiratory problems generally associated with the use of epoxy compounds.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Flame Retardant
Processing Method 
  • Casting
  • Potting
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Strength
psi
ASTM D790
Compressive Strength
psi
ASTM D695
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow
in/in/°F
 
Thermal Conductivity
Btu·in/hr/ft²/°F
 
Heat Deflection Temperature
°F
 
Service Temperature
°F
 
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Strength
V/mil
ASTM D149
Dielectric Constant (1 kHz)
 
ASTM D150
Dissipation Factor (1 kHz)
 
ASTM D150
Flammability
Nominal Value
Unit
Test Method
Flame Rating
 
UL 94
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Part A
 
 
Part B
 
 
Shelf Life (77°F)
wk
 
Available Documents
Technical Datasheet (English)
Uncured Properties
Nominal Value
Unit
Test Method
Color
     
-- 2
 
 
-- 3
 
 
Density
     
-- 2
g/cm³
 
-- 3
g/cm³
 
Viscosity
     
-- 2
Pa·s
ASTM D2393
-- 4
Pa·s
 
-- 3
Pa·s
ASTM D2393
Pot Life 5
min
 
Curing Time (72°F)
hr
 
Gel Time (77°F)
min
 
Notes
1Typical properties: these are not to be construed as specifications.
2Part A
3Part B
4Mixed
5100 gram mass
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.