Home > Plastics > Materials > Chemlon® > Chemlon® 133 G - Datasheet

Chemlon® 133 G Datasheet

Polyamide 66

33% Glass Fiber

Supplied by Teknor Apex Company (Chem Polymer)

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
Chemlon® 133 G is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Chemlon® 133 G: Flame Rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber, 33% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (24 hr)
%
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation
    ASTM D638
Yield
%
 
Break
%
 
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Melting Temperature
°F
DSC
CLTE - Flow
in/in/°F
ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
ASTM D257
Dielectric Strength (0.118 in)
V/mil
ASTM D149
Comparative Tracking Index (CTI)
V
UL 746
Flammability
Nominal Value
Unit
Test Method
Flame Rating (0.0295 in)
 
UL 94
Oxygen Index
%
ASTM D2863
FMVSS Flammability
 
FMVSS 302
Generic Name
Generic Name may also be described by the following terms: PA66.
Available Documents
Technical Datasheet
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Suggested Max Moisture
%
 
Suggested Max Regrind
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.