IDES Prospector Already have an account? Login Here

NatureFlex™ 90NM Data Sheet

Regenerated Cellulose

Supplied by Innovia Films Ltd.

Home > Plastics > NatureFlex™ > NatureFlex™ 90NM Data Sheet
View Complete Data Sheet
Search 85000+ Data Sheets
Create Free Account
Product Description
NatureFlex films are manufactured from renewable wood pulp harvested from plantations operating good forestry management principles. Heat-sealability and barrier properties are achieved through Innovia Films' proprietary coating technologies.

Literature reference: N500

1 side metallized, high barrier film for twistwrap
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Barrier Resin
  • Biodegradable
  • Compostable
  • Renewable Resource Content
  
Uses 
  • Film
  • Packaging
  
Forms 
  • Film
Films
Nominal Value
Unit
Test Method
Seal Initiation Temperature 2 (0.92 mil)
°F
  
Oxygen Transmission Rate (Wet) 3 (75°F, 0.92 mil, 0.0% RH)
cm³/100 in²/24 hr
 ASTM F1927
Water Vapor Transmission 4
g/100 in²/24 hr
 ASTM E96
Film Gauge
mil
 Internal Method
Yield (0.9 mil)
in²/lb
 Internal Method
Additional Information
Nominal Value
Unit
Test Method
Optimum Deckle Widths
in
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NatureFlex™ 90NM, NatureFlex 90NM, NatureFlex™ , NatureFlex, NatureFlex90NM, 90 NM, 90NM, Cellulose, Regenerated, Cellulose Regenerated, Cellulose Acetate, CA, Innovia Films, CelluloseRegenerated, CelluloseAcetate, NM90
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Notes
1Typical properties: these are not to be construed as specifications.
20.5s dwell, 10 psi
3RH: 0 to 5%
4100°F, 90%RH
 
IDES
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.