| Product Description | ||||
|
Delrin® 500TL is a medium viscosity acetal homopolymer resin containing 1.5% Teflon® PTFE Micropowder. It is designed for applications requiring moderate low wear and friction against steel, itself, or other plastics.
|
||||
| General | ||||
|
Material Status
|
|
|||
|
Availability
|
|
|||
|
Additive
|
|
|||
|
Features
|
|
|||
|
Uses
|
|
|||
|
RoHS Compliance
|
|
|||
|
Automotive Specifications
|
|
|||
|
Appearance
|
|
|||
|
Forms
|
|
|||
|
Processing Method
|
|
|||
|
Multi-Point Data
|
|
|||
|
Part Marking Code (ISO 11469)
|
|
|||
|
Resin ID (ISO 1043)
|
|
|||
| Physical |
Nominal Value
|
Unit
|
Test Method
|
|
Specific Gravity
|
|||
|
--
|
|
|
ASTM D792 |
|
--
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR)
|
|||
|
190°C/1.05 kg
|
|
g/10 min
|
ASTM D1238 |
|
190°C/2.16 kg
|
|
g/10 min
|
ISO 1133 |
|
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
|
|
in³/10min
|
ISO 1133 |
|
Molding Shrinkage
|
|||
|
Flow: 24 hr, 0.126 in
|
|
in/in
|
ASTM D955 |
|
Across Flow: 24 hr, 0.126 in
|
|
in/in
|
ASTM D955 |
|
Across Flow: 0.0787 in
|
|
%
|
ISO 294-4 |
|
Flow: 0.0787 in
|
|
%
|
ISO 294-4 |
|
Water Absorption
|
|||
|
73°F, 24 hr
|
|
%
|
ASTM D570 |
|
73°F, 24 hr
|
|
%
|
ISO 62 |
|
Saturation, 73°F
|
|
%
|
ASTM D570 |
|
Saturation, 73°F
|
|
%
|
ISO 62 |
|
Equilibrium, 73°F, 50% RH
|
|
%
|
ASTM D570 |
|
Equilibrium, 73°F, 50% RH
|
|
%
|
ISO 62 |
| Mechanical |
Nominal Value
|
Unit
|
Test Method
|
|
Tensile Modulus
|
|||
|
73°F 3
|
|
psi
|
ASTM D638 |
|
73°F
|
|
psi
|
ISO 527-2 |
|
Tensile Strength
|
|||
|
Yield, 73°F 3
|
|
psi
|
ASTM D638 |
|
Yield, 73°F
|
|
psi
|
ISO 527-2 |
|
158°F 3
|
|
psi
|
ASTM D638 |
|
212°F 3
|
|
psi
|
ASTM D638 |
|
250°F 3
|
|
psi
|
ASTM D638 |
|
Tensile Elongation
|
|||
|
Yield, 73°F 3
|
|
%
|
ASTM D638 |
|
Yield, 73°F
|
|
%
|
ISO 527-2 |
|
Break, 73°F 3
|
|
%
|
ASTM D638 |
|
Break, 158°F 3
|
|
%
|
ASTM D638 |
|
Break, 212°F 3
|
|
%
|
ASTM D638 |
|
Break, 250°F 3
|
|
%
|
ASTM D638 |
|
Break, 73°F
|
|
%
|
ISO 527-2/50 |
|
Nominal Tensile Strain at Break (73°F)
|
|
%
|
ISO 527-2 |
|
Flexural Modulus
|
|||
|
73°F
|
|
psi
|
ASTM D790 |
|
158°F
|
|
psi
|
ASTM D790 |
|
212°F
|
|
psi
|
ASTM D790 |
|
250°F
|
|
psi
|
ASTM D790 |
|
73°F
|
|
psi
|
ISO 178 |
|
Flexural Strength (5.0% Strain, 73°F)
|
|
psi
|
ASTM D790 |
|
Shear Strength (73°F)
|
|
psi
|
ASTM D732 |
| Impact |
Nominal Value
|
Unit
|
Test Method
|
|
Charpy Notched Impact Strength
|
ISO 179/1eA | ||
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Charpy Unnotched Impact Strength
|
ISO 179/1eU | ||
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Notched Izod Impact
|
|||
|
-40°F
|
|
ft·lb/in
|
ASTM D256 |
|
73°F
|
|
ft·lb/in
|
ASTM D256 |
|
-40°F
|
|
ft·lb/in²
|
ISO 180/1A |
|
73°F
|
|
ft·lb/in²
|
ISO 180/1A |
|
Unnotched Izod Impact (73°F)
|
|
ft·lb/in
|
ASTM D4812 |
|
Tensile Impact Strength 4 (73°F)
|
|
ft·lb/in²
|
ASTM D1822 |
| Hardness |
Nominal Value
|
Unit
|
Test Method
|
|
Rockwell Hardness
|
ASTM D785 | ||
|
M-Scale
|
|
|
|
|
R-Scale
|
|
|
|
| Thermal |
Nominal Value
|
Unit
|
Test Method
|
|
Deflection Temperature Under Load
|
|||
|
66 psi, Unannealed
|
|
°F
|
ASTM D648 |
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ASTM D648 |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Melting Temperature 5
|
|
°F
|
ISO 11357-3, ASTM D3418 |
|
CLTE
|
|||
|
Flow: 73 to 131°F
|
|
in/in/°F
|
ASTM E831, ISO 11359-2 |
|
Flow: -40 to 73°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Flow: 131 to 212°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Transverse: 73 to 131°F
|
|
in/in/°F
|
ASTM E831, ISO 11359-2 |
|
Transverse: -40 to 73°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Transverse: 131 to 212°F
|
|
in/in/°F
|
ISO 11359-2 |
|
RTI Elec
|
UL 746 | ||
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
|
RTI Imp
|
UL 746 | ||
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
|
RTI Str
|
UL 746 | ||
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
| Electrical |
Nominal Value
|
Unit
|
Test Method
|
|
Surface Resistivity
|
|
ohm
|
ASTM D257 |
|
Volume Resistivity
|
|||
|
73°F
|
|
ohm·cm
|
ASTM D257 |
|
--
|
|
ohm·cm
|
IEC 60093 |
|
Dielectric Strength 6 (73°F, 0.126 in)
|
|
V/mil
|
ASTM D149 |
|
Dielectric Constant
|
|||
|
73°F, 1 MHz
|
|
|
ASTM D150, IEC 60250 |
|
73°F, 100 Hz
|
|
|
IEC 60250 |
|
Dissipation Factor (73°F, 1 MHz)
|
|
|
ASTM D150 |
|
Comparative Tracking Index (CTI) (0.118 in)
|
|
V
|
UL 746 |
|
Comparative Tracking Index
|
|
V
|
IEC 60112 |
| Flammability |
Nominal Value
|
Unit
|
Test Method
|
|
Flame Rating
|
UL 94, IEC 60695-11-10, -20 | ||
|
0.0591 in
|
|
|
|
|
0.118 in
|
|
|
|
|
Oxygen Index
|
|
%
|
ISO 4589-2 |
| Related Terminology | |||
|
This supplier and product may also be known by these terms: DerlinProduct names can be difficult to match. You may have searched any one of these terms to find this product: Delrin® 500TL NC010, Delrin 500TL NC010, Delrin® , Delrin, Delrin500TLNC010, 500 TL NC 010, 500TL NC010, 500TL, TLNC, NC010, 500TLNC010, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, DuPont, AcetalPOMHomopolymer, TL500
|
|||
| Features | |||
|
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, High Strength, High Stiffness, Medium Viscosity, Low Friction, Good Creep Resistance, Creep Resistant, Ultrasonic Weldable.
|
|||
| Uses | |||
|
Uses may also be described by the following terms: Cast Film, Tubing, Tube, Wire and Cable Applications, Wire & Cable Applications, Engineering Parts.
|
|||
| Automotive Specifications | |||
|
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ASTM (1), CHRYSLER (1), GM (1).
|
|||
| Injection |
Nominal Value
|
Unit
|
|
|
Drying Temperature
|
|
°F
|
|
|
Drying Time - Desiccant Dryer
|
|
hr
|
|
|
Suggested Max Moisture
|
|
%
|
|
|
Processing (Melt) Temp
|
|
°F
|
|
|
Melt Temperature, Optimum - Injection Molding
|
|
°F
|
|
|
Mold Temperature
|
|
°F
|
|
|
Mold Temperature, Optimum - Injection Molding
|
|
°F
|
|
|
Drying Recommended
|
|
|
| Notes |
| 1This specification is applicable for the Americas region. |
| 2Typical properties: these are not to be construed as specifications. |
| 30.20 in/min |
| 4Type L |
| 510°C/min |
| 6Method A (Short-Time) |
|
UL and the UL logo are trademarks of UL LLC © 2013. All Rights Reserved.
The information presented on this datasheet was acquired by UL IDES from the producer of the material. UL IDES makes substantial efforts to assure the accuracy of this data. However, UL IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier. |