Home > Plastics > Materials > Bayblend® > Bayblend® FR3010 - Datasheet

Bayblend® FR3010 Data Sheet

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience - Polycarbonates

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
(PC+ABS) blend; unreinforced; flame-retardant; injection molding grade; increased heat resistance; Vicat/B 120 temperature = 110 °C; UL recognition 94 V-0 (1.5 mm); antimony-, chlorine- and bromine-free flame retardant; glow wire test (GWFI): 960 °C (2.0 mm); improved chemical resistance and stress cracking behavior; successor to FR2010.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Flame Retardant
Features 
  • Antimony Free
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Good Chemical Resistance
  • High ESCR (Stress Crack Resist.)
  • High Heat Resistance
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
ISO 1183 2
Melt volume-flow rate (240°C/5.0 kg)
in³/10min
ISO 1133 2
Molding Shrinkage
    ISO 2577 2
Flow
%
 
Across Flow
%
 
Water Absorption
    ISO 62 2
Saturation
%
 
Equilibrium
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
ISO 527-2 2
Tensile Stress
     
Yield
psi
ISO 527-2 2
Break
psi
ISO 527-2/50
Tensile Strain
     
Yield
%
ISO 527-2 2
Break
%
ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
    ISO 180/A
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Unnotched Izod Impact Strength (73°F)
 
ISO 180
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ISO 75-2 2
66 psi
°F
 
264 psi
°F
 
Vicat Softening Temperature
     
--
°F
ISO 306/B120
50°C/h, B (50N)
°F
ISO 306 2
CLTE
    ISO 11359-2 2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface resistivity
ohm
IEC 60093 2
Volume resistivity
ohm·in
IEC 60093 2
Electric strength
V/mil
IEC 60243-1 2
Relative Permittivity
    IEC 60250 2
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
    IEC 60250 2
100 Hz
 
 
1 MHz
 
 
Comparative tracking index
 
IEC 60112 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating
    UL 94
0.0591 in
 
 
0.0787 in
 
 
0.118 in
 
 
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity 3 (500°F)
Pa·s
ISO 11443
Features
Features may also be described by the following terms: High Heat Resistance, Good Chemical Resistance, Chemical Resistant, No Antimony, Antimony free, No Chlorine Content, Chlorine Free, Bromine Free, No Bromine Content, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Available Documents
Technical Datasheet (Chinese (Traditional))
Technical Datasheet (Chinese)
Technical Datasheet (English)
Technical Datasheet (German)
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
31000 1/s
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.