Home > Plastics > Materials > Alkathene® > Alkathene® LD0220MS - Datasheet

Alkathene® LD0220MS Datasheet

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

View Complete Data Sheet Search 95000+ Data Sheets
Create Your Free Account!
Product Description
LD0220MS is a low density polyethylene designed for use in the production of low gauge (20-50µm) high quality film. LD0220MS is formulated with a process stabilisation and antiblock additive package and contains an additive (erucamide) designed to conver a medium level of slip.

LD0220MS is intended for use in high quality lamination and film applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Processing Stabilizer
  • Slip
Features 
  • Antiblocking
  • Food Contact Acceptable
  • High Clarity
  • Slip
 
Uses 
  • Film
  • Laminates
  • Sheet
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
  • Sheet Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Secant Modulus
    ASTM D882
2% Secant, MD : 1.3 mil, Blown Film
psi
 
2% Secant, TD : 1.3 mil, Blown Film
psi
 
Tensile Strength
    ASTM D882
MD : Yield, 1.3 mil, Blown Film
psi
 
TD : Yield, 1.3 mil, Blown Film
psi
 
MD : Break, 1.3 mil, Blown Film
psi
 
TD : Break, 1.3 mil, Blown Film
psi
 
Tensile Elongation
    ASTM D882
MD : Break, 1.3 mil, Blown Film
%
 
TD : Break, 1.3 mil, Blown Film
%
 
Dart Drop Impact (1.3 mil, Blown Film)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD : 1.3 mil
g
 
TD : 1.3 mil
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.26 mil, Blown Film)
 
ASTM D2457
Haze (1.26 mil, Blown Film)
%
ASTM D1003
Additional Information
Film properties taken from blown film processed at a blow up ratio of 3.5:1.
Features
Features may also be described by the following terms: Slip, Unspecified Slip, High Clarity, Antiblocking, Unspecified Antiblock.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), AS (1).
Available Documents
Technical Datasheet (English)
Notes
1Typical properties: these are not to be construed as specifications.
 
UL and the UL logo are trademarks of UL LLC © 2014. All Rights Reserved.
The information presented on this datasheet was acquired by UL Prospector from the producer of the material. UL Prospector makes substantial efforts to assure the accuracy of this data. However, UL Prospector assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.