Dryflex XL40100: Thermoplastic Elastomer Base Material: TPV Hardness: 40 Shore A Service Temperature Range: -40 to +125°C (Unstressed Material). Colour: Natural or black, but can easily be coloured in any shade Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Very Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to PP, PE

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications. Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future. We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry. Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.

Description: Thermoplastic Elastomer, TPS-SEBS Service Temperature: -50 to +75°C (unstressed material) Colour: Translucent Form: Free flowing pellets Recycling: 100% recyclable Special Features A foamable compound, developed for the production of cellular profiles. Conforms to the BS 7412 deflection recovery requirements at -10C, 23C and 55C for Class A and B glazing gaskets and weatherstrips.

Sealing compounds for crown corks The EPSeal 100 series is designed for crown corks and can be used for carbonated beverages including lemonades, beer, mineral water, juices and milk based drinks. Different versions accommodate all the beverage processing systems including sterilisation. Additional versions address steel down-gauging as well as twist off crown applications. Our laser marking versions support beverage promotion strategies. Oil free grades are also available.

TPE Sealing compounds for aluminium closures The EPSeal 300 series was developed for aluminium screw closures. Different versions are optimised for a wide range of beverages for example mineral water, wine, lemonades and milk based drinks. The 300 series includes versions for cold fill through to sterilisation and additionally for returnable or one way packaging systems. Included in this series are very low migration versions for sensitive application areas such as mineral water. A variety of lubricant packages address different applications leading to consistent and reliable consumer friendly closures whilst accommodating the special needs of children and senior citizens.

TPE compounds for synthetic wine corks and T-stoppers The EPSeal 400 series was developed for synthetic wine corks and T-stoppers for spirits. Various grades are available for both extrusion and injection moulding process. The addition of foam masterbatch enables the user to reach individual customer specifications. The optimal slip systems we have developed allow for consumer friendly removal from the bottle mouth.

TPE sealing compounds for out shell systems The EPSeal 700 series are for PP or PE closures using the out shell compression moulding system and also tape extrusion process. There are versions for both carbonated soft drinks and the premium segment of mineral waters where very low migration is required. Additionally, laser marking versions are available for beverage promotional campaigns.

For plastic closures using the in shell liner moulding The EPSeal 800 series was developed for PE and PP closures specially designed for the in shell moulding liner technology. The series includes versions for cold fill, pasteurisation and hot fill beverage treatment systems. This series also includes versions with different rheological values to address the special processing requirements of different lining machine types. An assortment of lubricant packages addresses the spectrum of closure and liner profile designs but all lead to a neutral taste and odour sealant whilst remaining consumer friendly and reliable.

The main quantity of natural cork which is harvested today is used as pressed cork or mixed with PU or rubber. The processing of this kind of cork can be expensive and require a lot of energy. We have developed a special manufacturing method to combine natural cork with thermoplastic raw materials. Meaning Lifocork can be processed using typical thermoplastic processing methods such as injection moulding, extrusion or thermoforming. Cork is a natural product which comes from the bark of the cork oak tree. The removal of the bark does not harm the trees and the bark is only harvested after the first 20 years of growth. The removal stimulates a steady regeneration of the bark. Each cork tree provides on average 16 harvests over its 150-200 year lifespan. Cork itself has a cell-like structure which is light and highly compressible. It is used in construction, sports, industrial and household applications. It's also possible to make foamed parts from Lifocork. This offers materials with very low densities (as low as 0.45 g/ccm) and therefore gives lightweight parts. The foamed Lifocork also gives a damping, shock absorbent effect, ideal for orthopaedic shoe lifts and inserts. Lifocork can be processed using thermoplastic processing methods. In injection moulding it can be processed using standard equipment. Lifocork can also be processed in 2-component moulding. It has an excellent bond to TPE, PP and PE. Other processing methods include extrusion or thermoforming with a double belt press.

The main quantity of natural cork which is harvested today is used as pressed cork or mixed with PU or rubber. The processing of this kind of cork can be expensive and require a lot of energy. We have developed a special manufacturing method to combine natural cork with thermoplastic raw materials. Meaning Lifocork can be processed using typical thermoplastic processing methods such as injection moulding, extrusion or thermoforming. Cork is a natural product which comes from the bark of the cork oak tree. The removal of the bark does not harm the trees and the bark is only harvested after the first 20 years of growth. The removal stimulates a steady regeneration of the bark. Each cork tree provides on average 16 harvests over its 150-200 year lifespan. Cork itself has a cell-like structure which is light and highly compressible. It is used in construction, sports, industrial and household applications. It's also possible to make foamed parts from Lifocork. This offers materials with very low densities (as low as 0.45 g/ccm) and therefore gives lightweight parts. The foamed Lifocork also gives a damping, shock absorbent effect, ideal for orthopaedic shoe lifts and inserts. Lifocork can be processed using thermoplastic processing methods. In injection moulding it can be processed using standard equipment. Lifocork can also be processed in 2-component moulding. It has an excellent bond to TPE, PP and PE. Other processing methods include extrusion or thermoforming with a double belt press.

The main quantity of natural cork which is harvested today is used as pressed cork or mixed with PU or rubber. The processing of this kind of cork can be expensive and require a lot of energy. We have developed a special manufacturing method to combine natural cork with thermoplastic raw materials. Meaning Lifocork can be processed using typical thermoplastic processing methods such as injection moulding, extrusion or thermoforming. Cork is a natural product which comes from the bark of the cork oak tree. The removal of the bark does not harm the trees and the bark is only harvested after the first 20 years of growth. The removal stimulates a steady regeneration of the bark. Each cork tree provides on average 16 harvests over its 150-200 year lifespan. Cork itself has a cell-like structure which is light and highly compressible. It is used in construction, sports, industrial and household applications. It's also possible to make foamed parts from Lifocork. This offers materials with very low densities (as low as 0.45 g/ccm) and therefore gives lightweight parts. The foamed Lifocork also gives a damping, shock absorbent effect, ideal for orthopaedic shoe lifts and inserts. Lifocork can be processed using thermoplastic processing methods. In injection moulding it can be processed using standard equipment. Lifocork can also be processed in 2-component moulding. It has an excellent bond to TPE, PP and PE. Other processing methods include extrusion or thermoforming with a double belt press.

The main quantity of natural cork which is harvested today is used as pressed cork or mixed with PU or rubber. The processing of this kind of cork can be expensive and require a lot of energy. We have developed a special manufacturing method to combine natural cork with thermoplastic raw materials. Meaning Lifocork can be processed using typical thermoplastic processing methods such as injection moulding, extrusion or thermoforming. Cork is a natural product which comes from the bark of the cork oak tree. The removal of the bark does not harm the trees and the bark is only harvested after the first 20 years of growth. The removal stimulates a steady regeneration of the bark. Each cork tree provides on average 16 harvests over its 150-200 year lifespan. Cork itself has a cell-like structure which is light and highly compressible. It is used in construction, sports, industrial and household applications. It's also possible to make foamed parts from Lifocork. This offers materials with very low densities (as low as 0.45 g/ccm) and therefore gives lightweight parts. The foamed Lifocork also gives a damping, shock absorbent effect, ideal for orthopaedic shoe lifts and inserts. Lifocork can be processed using thermoplastic processing methods. In injection moulding it can be processed using standard equipment. Lifocork can also be processed in 2-component moulding. It has an excellent bond to TPE, PP and PE. Other processing methods include extrusion or thermoforming with a double belt press.

The main quantity of natural cork which is harvested today is used as pressed cork or mixed with PU or rubber. The processing of this kind of cork can be expensive and require a lot of energy. We have developed a special manufacturing method to combine natural cork with thermoplastic raw materials. Meaning Lifocork can be processed using typical thermoplastic processing methods such as injection moulding, extrusion or thermoforming. Cork is a natural product which comes from the bark of the cork oak tree. The removal of the bark does not harm the trees and the bark is only harvested after the first 20 years of growth. The removal stimulates a steady regeneration of the bark. Each cork tree provides on average 16 harvests over its 150-200 year lifespan. Cork itself has a cell-like structure which is light and highly compressible. It is used in construction, sports, industrial and household applications. It's also possible to make foamed parts from Lifocork. This offers materials with very low densities (as low as 0.45 g/ccm) and therefore gives lightweight parts. The foamed Lifocork also gives a damping, shock absorbent effect, ideal for orthopaedic shoe lifts and inserts. Lifocork can be processed using thermoplastic processing methods. In injection moulding it can be processed using standard equipment. Lifocork can also be processed in 2-component moulding. It has an excellent bond to TPE, PP and PE. Other processing methods include extrusion or thermoforming with a double belt press.

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The series GA, GB and GC are TPE compounds based on SEBS. They are suited for a lot of different applications and are characterized by an easy processing and high fl exibility. Properties: - shore hardness: 20 - 90 Shore A - different densities: 0,89 - 1,21 g/ccm - translucent, nature colored or direct pigmented materials possible - resistant against aqueous solutions, inorganic acids and bases - physiologically harmless - easy processing in injection molding - good adhesion on PP/PE - very good mechanical properties - service temperature range from -40°C up to 100°C - high fl exibility - UV resistant (suitable for outdoor use) - applications with food contact are possible - in conformity with FDA, 10/2011/EC and EN 71/3 (toys) - in conformity with European directives 2002/95/EC (RoHS) and 2003/11/EC - recyclable Applications: - consumer/household: -- sealings for food storage boxes -- soft-touch surfaces for packaging -- 2-component grips for kitchen equipment - toys: -- soft seats for sledge -- wheels for toy cars -- toy characters - electronics: -- sealings for housings -- soft touch coating for housings - sports and leisure: -- bicycle grips -- soft-touch grips for hiking and nordic walking sticks -- fins - health care: -- grips for toothbrushes -- sealings and closures for packaging -- anti-slip grips for baby tableware

The Lifoflex GA, GB and GC series are TPE compounds based on SEBS. They are suited to a wide variety of applications and are characterised by easy processing and high flexibility.

The Lifoflex GA, GB and GC series are TPE compounds based on SEBS. They are suited to a wide variety of applications and are characterised by easy processing and high flexibility.