硅酮 (Silicone): Silicone Rubber, HTV
产品 | 可用性 | 产品说明 |
---|---|---|
Shin-Etsu Elastomer KE-7022U | 北美洲 |
KE-7022 U is intended for applications where excellent high heat resistance is required.
- This product is intended for high temperature service as -55 ~+ 315 °C (-67 ~ +600 °F)
Typical Applications
- PPC Rollers.
|
Shin-Etsu Elastomer KE-931U | 北美洲 |
KE-931 U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression, injection, transfer).
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-941U | 北美洲 |
KE-941 U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression, injection, transfer).
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-9510U | 北美洲 |
KE-9510U is one of a series of easy processing, general purpose silicone rubber base with low volatile content. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms
|
Shin-Etsu Elastomer KE-951U | 北美洲 |
KE-951U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression, injection, transfer).
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-9610U | 北美洲 |
KE-9610U is one of a series of easy processing, general purpose silicone rubber base with low volatile content. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms
|
Shin-Etsu Elastomer KE-9611U | 北美洲 |
KE-9611 U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression,injection,transfer).
- High fatigue durability.
Typical Applications
- Rubber contacts (keypads.)
|
Shin-Etsu Elastomer KE-961TU | 北美洲 |
KE-961TU is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression,injection,transfer).
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-961U | 北美洲 |
KE-961U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression,injection,transfer).
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-9710U | 北美洲 |
KE-9710 U is one of a series of easy processing, general purpose silicone rubber base with low volatile content. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
Typical Applications
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms
|
Shin-Etsu Elastomer KE-971TU | 北美洲 |
KE-971TU is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression,injection,transfer).
- Rubber contacts.
- Food packing.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KE-971U | 北美洲 |
KE-971U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding (compression,injection,transfer).
- Rubber contacts.
- Industrial packing.
- Diaphragms.
|
Shin-Etsu Elastomer KEG-2000-20A/B | 北美洲 |
Shin-Etsu KEG-2000-20 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2000-20 is low enough to allow easy pumping through most injection molding systems.
- Rapid cure time at elevated temperature.
- Long pot life at room temperature.
Typical Applications
- O-rings.
- Diaphragms.
- Capping.
- Rubber rollers.
- Connector packings.
- Other electrical parts.
|
Shin-Etsu Elastomer KEG-2000-30A/B | 北美洲 |
Shin-Etsu KEG-2000-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2000-30 is low enough to allow easy pumping through most injection molding systems.
- Rapid cure time at elevated temperature.
- Long pot life at room temperature.
Typical Applications
- O-rings.
- Diaphragms.
- Capping.
- Rubber rollers.
- Connector packings.
- Other electrical parts.
|
Shin-Etsu Elastomer KEG-2000-40A/B | 北美洲 |
Shin-Etsu KEG2000-40 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-40 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-Rings
- Diaphragms
- Capping
- Rubber Rollers
- Connector packaging
- Other electrical parts
- ClassVI certification
|
Shin-Etsu Elastomer KEG-2000-50A/B | 北美洲 |
Shin-Etsu KEG2000-50 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-50 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-Rings
- Diaphragms
- Capping
- Rubber Rollers
- Connector packaging
- Other electrical parts
- ClassVI certification
|
Shin-Etsu Elastomer KEG-2000-60A/B | 北美洲 |
Shin-Etsu KEG2000-60 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-60 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-Rings
- Diaphragms
- Capping
- Rubber Rollers
- Connector packaging
- Other electrical parts
- ClassVI certification
|
Shin-Etsu Elastomer KEG-2000-70A/B | 北美洲 |
Shin-Etsu KEG2000-70 is a fast cure type liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG2000-70 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-Rings
- Diaphragms
- Capping
- Rubber Rollers
- Connector packaging
- Other electrical parts
- ClassVI certification
|
Shin-Etsu Elastomer KEG-2000-75A/B | 北美洲 |
Shin-Etsu KEG-2000-75 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2000-75 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-Rings - Diaphragms
- Capping
- Rubber Rollers
- Connector packaging
- Other electrical parts
- ClassVI certification
|
Shin-Etsu Elastomer KEG-2001-50A/B | 北美洲 |
Shin-Etsu KEG-2001-50 is a very fast cure liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2001-50 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-rings.
- Diaphragms.
- Capping.
- Rubber rollers.
- Connector packings.
- Other electrical parts.
|
Shin-Etsu Elastomer KEG-2001-70A/B | 北美洲 |
Shin-Etsu KEG-2001-70 is a very fast cure liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KEG-2001-70 is low enough to allow easy pumping through most injection molding systems.
- High tear strength
- Rapid cure time at elevated temperature
- Long pot life at room temperature
Typical Applications
- O-rings.
- Diaphragms.
- Capping.
- Rubber rollers.
- Connector packings.
- Other electrical parts
|
Shin-Etsu Elastomer SV-13500U | 北美洲 |
SV-13500U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring.
- This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with extending fillers.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-14000U | 北美洲 |
SV-14000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
- This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-15000U | 北美洲 |
SV-15000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
- This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with filler.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-16000U | 北美洲 |
SV-16000U is one of a series of easy processing, no post cure silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
- This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with other extending fillers.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-17500U | 北美洲 |
SV-17500U is one of a series of easy processing, silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring.
- This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-18000U | 北美洲 |
SV-18000U is one of a series of easy processing, mineral filled silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendering.
- This product can be blended with other Shin-Etsu no post cure or general purpose bases for intermediate properties. The choice between these bases will depend on specific requirements.
Typical Applications
- Roll covers.
- Diaphragms.
|
Shin-Etsu Elastomer SV-55000U | 北美洲 |
SV-55000U is one of a series of silicone bases designed for applications requiring high strength.
- Excellent mechanical properties.
Typical Applications
- Molding and extrusion applications for a wide range of products.
|
Shin-Etsu Elastomer SV-55002U | 北美洲 |
SV-55002U is one of a series of silicone bases Type of HCR designed for applications requiring high strength.
- Excellent mechanical properties
Typical Applications
- Molding and Extrusion applications for a wide range of products
|
Shin-Etsu Elastomer SV-56000U | 北美洲 |
SV-56000U is one of a series of silicone bases designed for applications requiring high strength.
- Excellent mechanical properties
Typical Applications
- Molding and extrusion applications for a wide range of products.
|
Shin-Etsu Elastomer SV-57000U | 北美洲 |
SV-57000U is one of a series of silicone bases designed for applications requiring high strength.
- Excellent mechanical properties
Typical Applications
- Molding and extrusion applications for a wide range of products
|
Shin-Etsu Elastomer SV-58000U | 北美洲 |
SV-58000U is one of a series of silicone bases designed for applications requiring high strength.
- Excellent mechanical properties
Typical Applications
- Molding and extrusion applications for a wide range of products.
|
Shin-Etsu Elastomer X-30-1028U | 北美洲 |
Shin-Etsu X-30-1028 U is a phenyl (PVMQ) silicone base. This product is designed for good low temperature characteristics.
- A broad range of service temperatures from -100 to +260°C (-148 to +500°F.)
Typical Applications
- Low temperature gaskets.
- Low temperature packing.
|
Shin-Etsu Elastomer X-30-783U | 北美洲 |
Shin-Etsu X-30-783 U is a phenyl (PVMQ) silicone product. This product is designed for good low temperature characteristics.
- A broad range of service temperatures from -100 to +260°C (-148 to +500°F.)
Typical Applications
- Low temperature gaskets.
- Low temperature packing.
|
Shin-Etsu Elastomer X-65-130U | 北美洲 |
Shin-Etsu X-65-130 U is a black semi-conductive silicone compound designed to give very low volume resistivity for molding and extruding.
- Good processability.
- Lower than average volume resistivity.
Typical Applications
- EMI gaskets.
- Key pads.
|
Silplus® 30 AS | 北美洲 |
Silplus 30 AS, 30 duro hardness heat cured silicone rubber compound for compression molding processes, offers a good anti-static property to silicone rubber products.
Key Features and Typical Benefits
- Good anti-static property
- Colorable translucent appearance
- Excellent mechanical properties and heat resistance
- Excellent processability
- Easy coloring
Potential Applications
- Mobile jacket, keypad cover, keypad watch
- Consumer goods, novelty, accessory
- Industry roller, rubber sheet
- Automobile parts
|
Silplus® 40 MP | 北美洲 |
Silplus 40 MP is a heat cured elastomer with outstanding processing capability. Silplus 40 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.
Key Features and Benefits
- compounding simplicity
- good extrudability
- high mechanical properties
- good green strength
- easily blendable
- versatile
Potential Applications
Because of its outstanding properties, Silplus 40 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.
|
Silplus® 50 MP | 北美洲 |
Silplus 50 MP is a heat cured elastomer with outstanding processing capability. Silplus 50 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring.
Key Features and Benefits
- compounding simplicity
- good extrudability
- high mechanical properties
- good green strength
- easily blendable
- versatile
|
Silplus® 60 CW | 北美洲 |
Silplus 60 CW is a heat cured silicone rubber base compound. It is an excellent candidate to consider for use in the cable and wire industry.
Key Features and Benefits
- excellent processing (high green strength)
- good mechanical profile
- very good electrical properties
- enhanced high temperature resistance
|
Silplus® 60 EX | 北美洲 |
Silplus 60 EX is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in extrusion, press-molding injection and calendaring. Silplus 60 EX heat cured silicone may be considered for use in a wide variety of high quality applications such as high durometer tubes and profiles.
Key Features and Benefits
- excellent extruding processability
- good mechanical properties
- high green strength
- easily blendable
- versatile
Potential Applications
Because of its outstanding properties, Silplus 60 EX heat cured silicone is an excellent candidate to consider for use in most types of extrusion and calendaring applications.
|