聚丙烯 (PP): PP,未指定
产品 | 可用性 | 产品说明 |
---|---|---|
Borcycle™ MF1981SY-95 | 欧洲 |
Description
Borcycle™ MF1981SY-95 is a Post-Consumer Recycled (PCR) compound with around 10% talc, supplied in pellet form for high-end applications mainly in the appliance industry. Borcycle MF1981SY is an ideal PCR solution used where sustainability and circularity matter.
It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications.
Applications
Borcycle MF1981SY-95 offers excellent mechanical performances on top of very good optical properties. It is used in application like
- Vacuum cleaners and other small appliances
- Visible and non-visible applications in white goods
- Structural parts
Special Features
- Over 80% Post Consumer Recyclate made from used plastic scrap
- Good impact performance
- Good aesthetical properties
- Colour: black
- Shape: cylindrical pellets
|
Borcycle™ UF582SA-90 | 欧洲 |
Description
Borcycle™ UF582SA-90 is a high gloss, white compound with 55% advanced Post-Consumer Recycled (PCR) content, supplied in pellet form for high-end applications mainly in the appliance industry. This product is an ideal PCR solution used where sustainability and circularity matter. It is not intended for use in food contact, potable water contact, pharmaceutical and medical applications. Due to the nature of recyclates, some variation in colour can be observed between batches.
Applications
Borcycle UF582SA-90 offers excellent mechanical performances on top of very good optical properties. It is used in applications like:
- Small appliances
- White goods
- Rigid applications
Special Features
- 55% Post-Consumer Recyclate made from used plastic scrap
- Good stiffness performance
- Excellent aesthetical properties
- Excellent antistatic performance
- High heat resistance
- Colour: White
|
Borealis PP BJ400HP | 北美洲 |
BJ400HP is a special low viscosity polypropylene compound developed to fit the production of PP-GF composites in the direct LFT compression and injection moulding process as well as in combination with LGF concentrates on the injection moulding process.
The product is available in natural colour.
Applications
BJ400HP has been developed especially for applications like:
- Front end carriers
- Door module carriers
- Under body shieldings
- Dashboard carriers
- Battery supports
Special Features
BJ400HP is designed especially for low emissions and organoleptic properties.
|
Borealis PP EE002AE | 北美洲 |
Daplen EE002AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour.
This material has excellent balanced mechanical properties and gives a good surface quality.
This grade is additionally available in an emission optimized version (Daplen EE002AE-AR) with the same technical properties.
Applications
Daplen EE002AE has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
- Automotive exterior applications
|
Borealis PP EE189HPB | 北美洲 |
Daplen EE189HPB is a 16% mineral filled polypropylene compound intended for injection moulding.
Applications
Daplen EE189HPB has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Door panels and pockets
Special features
- Excellent stiffness and impact balance
- No tendency to show stickiness after outdoor exposure
- High scratch resistance
|
Borealis PP EF015AE | 北美洲 |
EF015AE is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour.
This material has excellent balanced mechanical properties and gives a good surface quality.
Applications
EF015AE has been developed especially for applications like:
- Bumpers
- Spoilers
- Exterior trims
- Automotive exterior applications
Special Features
- Excellent surface appearance
- High flowability
|
Borealis PP FR4850 | 北美洲 |
FR4850 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire.
Applications
FR4850 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 1.5 mm² or 16 AWG conductors and finer.
Specifications
FR4850 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:
- SAE J1128/J1127
- GMW15626
- Chrysler MS-12441
- Ford ES-AU5T-1A348-AA
- ISO 6722
|
Borealis PP FR4852 | 北美洲 |
FR4852 is a halogen free flame retardant polypropylene compound for Primary Automotive Wire.
Applications
FR4852 is intended for use as a 125 °C rated primary insulation for automotive thin wall wires of 2,5 mm² or 14 AWG conductors and larger.
Specifications
FR4852 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:
- SAE J1128/J1127
- GMW15626
- Chrysler MS-12441
- Ford ES-AU5T-1A348-AA
- ISO 6722
|
Borealis PP KSR4525 | 北美洲 |
KSR4525 is a reactor elastomer modified polypropylene intended for injection moulding. The product is available in natural colour.
This material has excellent balanced mechanical properties and gives a good surface quality.
Applications
KSR4525 has been developed especially for the car industry to be used in automotive exterior parts.
- Bumpers
- Exterior trims
Special Features
- UV stabilised
|
Borealis PP MB350WG | 北美洲 |
MB350WG is a 30% mineral filled polypropylene compound intended for injection moulding.
This material has a very high impact strength while maintaining good stiffness and is easy to process.
Applications
MB350WG has been developed especially for applications like:
- Washing machine parts
- Dishwashers components
Special Features
- Long term high heat stabilised
- Detergent resistant
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MB352WG | 北美洲 |
MB352WG is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
MB352WG has been developed especially for applications like:
- Washing machine parts
- Dishwashers components
Special Features
- Excellent stiffness and impact balance
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MB471WG | 北美洲 |
MB471WG is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
Applications
MB471WG has been developed especially for applications like:
- Dishwashers components
- Washing machine parts
Special Features
- Long term high heat stabilised
- Detergent resistant
- UL registered under File E108112
- Excellent dimensional stability
|
Borealis PP MD206U | 北美洲 |
MD206U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
MD206U has been developed especially for applications like:
- Door panels and pockets
- Other automotive parts
- Cowl vent grilles
Special Features
- UV stabilised
|
Borealis PP MD231U | 北美洲 |
MD231U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD231U is designed for:
- Air ducts
- Air conditioning parts
- Air filters
- Automotive under the bonnet parts
Special Features
- Long term high heat stabilised
- High dimensional stability
- UL registered under File E108112
- Low shrinkage
|
Borealis PP MD360HP | 北美洲 |
MD360HP is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
MD360HP has been developed especially for exterior applications needing good UV resistance:
- Exterior applications in the construction and building industry
- Exterior automotive parts
|
Borealis PP MD441AI | 北美洲 |
MD441AI is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD441AI is designed for:
- Air conditioning parts
- Automotive interior applications
- Heater housings
Special Features
- Excellent dimensional stability
- Low shrinkage
- Excellent high purity
|
Borealis PP MD441U | 北美洲 |
MD441U is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
Applications
MD441U is designed for:
- Air conditioning parts
- Under the bonnet components
- Heater housings
Special Features
- Long term high heat stabilised
- UL registered under File E108112
- Excellent dimensional stability
- Low shrinkage
|
Borealis PP ME212U | 北美洲 |
ME212U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
|
Borealis PP ME212WS | 北美洲 |
ME212WS is a 20% mineral filled polypropylene compound intended for injection moulding. The product is available in standard black 9502.
Applications
ME212WS has been developed especially for applications like:
Automotive under the bonnet parts
Special Features
- High heat stabilised
- The product is available in black.
|
Borealis PP ME266U | 北美洲 |
ME266U is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
ME266U has been developed especially for the car industry to be used in automotive interior parts.
- Pillar trims
- Automotive interior applications
- Door panels and pockets
|
Borealis PP ME268AI | 北美洲 |
ME268AI is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
ME268AI has been developed especially for the car industry to be used in automotive interior parts.
- Dashboards
- Other automotive interior parts
- Pillar trims
Special Features
- No tendency to show stickiness after outdoor exposure
|
Borealis PP ME466WG | 北美洲 |
ME466WG is a 40% mineral filled polypropylene compound intended for injection moulding. The product is available in 9020 white.
Applications
- Tubs for washing machines
- Basement for washing machines, dishwashers and dryers
- Washing machine parts
Special Features
ME466WG has been developed especially for the white goods industry.
|
Borealis PP MS64T20 | 北美洲 |
MS64T20 is a 20% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and is easy to process.
Applications
MS64T20 has been developed especially for the automotive industry.
- Cowl vent grilles
- Automotive exterior applications
- Automotive interior applications
|
Borealis PP PP4874 | 北美洲 |
PP4874 is a polypropylene compound intended for the solid insulation of data cables.
Applications
PP4874 is designed for high performance Unshielded Twisted Pair (UTP) data cables where short lay length and high twisting speed demand superior insulation hardness. The product exhibits high speed extrusion and provides process stability with regard to diameter and geometry, providing good conductor adhesion.
PP4874 is not intended as a telephone insulation for external applications. It is not intended for use in contact with petroleum jelly and has not been tested against the demanding high temperature (105°C) petroleum jelly ageing requirements typically specified for such cables
Specifications
PP4874 meets the following material classification:
- ISO 1873-1, KGHN, 1605-D022/045
- ASTM D 4101 - 11,PP0120B77000 E11
The following cable material standards are met by PP4874:
- EN 50290-2-25
Cables manufactured with PP4874 using sound extrusion practice normally comply with the following cable product standards:
- EN 50288
- IEC 61156
|
Borealis PP PS65T20 | 北美洲 |
PS65T20 is a 20% mineral filled polypropylene compound intended for injection and back injection moulding.
This material has excellent balanced mechanical properties and high melt flow rate.
Applications
PS65T20 has been developed especially for the car industry to be used in automotive interior parts.
- Trunk claddings
- Automotive interior applications
|
Borealis PP QB341 | 北美洲 |
QB341 is a 10% mineral filled polypropylene compound intended for injection moulding.
Applications
QB341 has been developed especially for the automotive industry.
- Under the bonnet components
- Automotive exterior applications
Special features
- UV stabilised
- Good stiffness and impact balance
|
Borealis PP QB370 | 北美洲 |
QB370 is a 30% mineral filled polypropylene compound intended for injection moulding.
|
Borealis PP QB377 | 北美洲 |
QB377 is a 12% mineral filled polypropylene compound intended for injection moulding.
Applications
QB377 has been developed especially for the white goods industry.
Special features
- High flow
- High stiffness
|
Borealis PP RB344 | 北美洲 |
RB344 is a 10% mineral filled polypropylene compound intended for injection moulding.
Applications
RB344 has been developed especially for the car industry to be used in automotive interior parts.
- Interior trims
- Pillar trims
Special features
- Good combination of stiffness and surface aesthetics
- Good toughness
|
Borealis PP RB354 | 北美洲 |
RB354 is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
RB354 has been developed especially for the white goods industry.
- Lids
- Covers
Special features
Very good combination of stiffness and surface aesthetics
|
Borealis PP RB361 | 北美洲 |
RB361 is a 20% mineral filled polypropylene compound intended for injection moulding.
|
Borealis PP RB363 | 北美洲 |
RB363 is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
RB363 has been developed especially for the automotive industry.
- Automotive exterior applications
- Automotive interior applications
Special features
- Good stiffness
- Excellent surface appearance
- Good scratch resistance
|
Borealis PP RC007 | 北美洲 |
RC007 is a 40% mineral filled polypropylene compound intended for injection moulding.
Applications
RC007 has been developed especially for the automotive industry.
- Automotive interior applications
- Engine covers
- Under the bonnet components
Special features
- High stiffness
- Improved high thermal stability
|
Borealis PP RC101 | 北美洲 |
RC101 is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
RC101 has been developed especially for the car industry to be used in automotive interior parts.
- Interior trims
- Automotive interior applications
Special features
- Very good combination of impact, stiffness and surface aesthetics
|
Borealis PP RC196 | 北美洲 |
RC196 is a 30% mineral filled polypropylene compound intended for injection moulding.
|
Borealis PP RF365MO | 北美洲 |
RF365MO is a specially modified highly-transparent polypropylene random copolymer with medium melt flow rate. It is designed for high-speed injection moulding and contains nucleating and demoulding additives.
Products originating from this grade have excellent transparency, very good organoleptic properties, good balance of stiffness and impact strength at ambient temperature, low blooming and good demoulding properties.
Applications
- Closures
- Thin wall containers
Special features
- Improved gloss and excellent transparency
- Excellent antistatic properties
- Good impact strength
- High stiffness
|
Borealis PP RF366MO | 北美洲 |
RF366MO is a specially modified highly-transparent polypropylene random copolymer with medium melt
flow rate. This grade is designed for high-speed injection moulding and contains nucleating and antistatic additives.
The improved processability, even at low melt temperature, allows energy savings and faster cycle time.
Products originating from this grade have excellent transparency, good organoleptic properties, good balance of
stiffness and impact strength at ambient temperatures. These properties, together with high gloss, make this grade
excellent choice for household and packaging articles.
RF366MO can be also used in injection stretch blow moulding (ISBM).
RF366MO is intended for injection moulding applications requiring excellent transparency
- Thin wall packaging
- Houseware containers
- Caps and closures
- Sweet-boxes
- Cosmetics
- Appliances
- Baby bottles
Special Features:
- Outstanding optical properties
- Improved gloss and excellent transparency
- Very good processability
- Good organoleptic properties
|
Borealis PP RP970 | 北美洲 |
RP970 is a polypropylene compound intended for injection moulding.
Applications
RP970 has been developed especially for the car industry to be used in automotive interior parts.
- Interior trims
- Covers
Special features
- Good stiffness and impact balance
- Very good flow
|
Borealis PP SB376 | 北美洲 |
SB376 is a polypropylene compound intended for injection moulding.
Applications
SB376 has been developed especially for the car industry to be used in automotive exterior parts.
- Automotive exterior applications
Special features
- Good stiffness and impact balance
- UV stabilised
|
Borealis PP SC101 | 北美洲 |
SC101 is a 20% mineral filled polypropylene compound intended for injection moulding.
Applications
- Air ducts
- Appliances
Special features
- Very good stiffness and impact balance
- Very good heat stabilised
- Very good dimensional stability
- Very good chemical resistance
|