DOWLEX™ 2342M 聚乙烯树脂是一种高密度乙烯/辛烯共聚物树脂，其分子机构独特，主链为线性聚乙烯，支链为辛烯，这种结构使其综合了柔软性和很高的韧性以及耐环境应力开裂性能。在挤出加工时，将特定的炭黑色母料加入DOWLEX 2342M 聚乙烯树脂，可以制造出稳定性好、均匀的黑色片材，这种黑色片材具有优异的焊接性。采用此加工方法制备的片材满足通用防水膜的有关规范和指令中的要求，这些规范和指令包括北莱茵-威斯特法伦州规范或者联邦德国材料检验研究院（BAM）在1992年7月份颁布的“填埋场塑料膜规范”。 加工性能：DOWLEX 2342M 聚乙烯树脂典型的挤出加工温度范围在190 至 230°C之间。该树脂含有加工稳定剂，这种助剂与色母料中加入的助剂相匹配，以确保短期和长期的加工性能、热稳定性和环境稳定性，这里包括了金属钝化剂。 应用领域： - 深色片材 - 通用防水膜

DOWLEX* 2344 聚乙烯树脂是一种乙烯-辛烯共聚物，其制备采用了陶氏化学公司专有的溶液聚合工艺。其独特的分子结构中带有受控的支链分布，使其具有优异的耐环境应力开裂性能以及非常好的长期静压强度。 加工性能：DOWLEX 2344 聚乙烯树脂典型的挤出温度范围从190 到 230°C。在某些类型的加工设备上采用反向温度曲线有可能更有利于加工。如欲获取更多信息，请参阅挤出手册。 符合以下法规： EU, No 10/2011 美国食品和药物管理局法规 21 CFR 175.105(c)(5) 美国食品和药物管理局法规 21 CFR 177.1520(c)3.2a (带有限制条件) 美国国家卫生基金会(NSF)标准14 美国国家卫生基金会(NSF)标准61 应用领域： 冷热水管系统，例如： - 地板采暖 - 墙壁采暖/制冷 - 屋顶制冷 - 散热器连接 - 冷热水配送 - 热回收系统 - 太阳能板

DOWLEX 2355 Polyethylene Resin is an ethylene-octene copolymer, produced in the proprietary solution process of The Dow Chemical Company. It has a unique molecular structure with a controlled side chain distribution, which provides excellent stress crack resistance properties combined with very good Long Term Hydrostatic Strength. Processability: Typical extrusion temperatures for processing of DOWLEX 2355 Polyethylene Resin range from 190 to 230° C. The use of a reverse temperature profile may be beneficial on certain types of processing equipment. For further information, see our Extrusion Guideline. Applications: Pipes for hot and cold water systems, e.g.: - floor heating - wall heating/cooling - ceiling cooling - radiator connections - warm / cold drinking water distribution - heat recovery systems - solar panels Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 175.105(c)(5) - U.S. FDA 21 CFR 177.1520(c)3.2a (with Restrictions) Consult the regulations for complete details.

DOWLEX 2377 Polyethylene Resin is an ethylene/octene-1 copolymer produced in the proprietary solution process of The Dow Chemical Company. It has a unique molecular structure with a controlled side chain distribution, which provides excellent stress crack resistance properties combined with outstanding Long Term Hydrostatic Strength. Applications: Pipes for Industrial Applications, e.g.: - Cooling water distribution - District heating/cooling - Desalination pipes - Mono- and multi-layer pipe Main Characteristics: - Suitable for elevated temperatures without crosslinking - Excellent processability - Flexibility Processing Recommendations: - DOWLEX 2377 Polyethylene Resin is easy to process on traditional PE processing equipment. Typical extrusion temperatures for processing range from 190 to 230 °C. For further information see our Extrusion Guideline. Note: - The purchaser remains responsible for determining whether the use complies with all relevant regulations.

DOWLEX 2388 Polyethylene Resin is an ethylene/octene-1 copolymer produced in the proprietary solution process of The Dow Chemical Company. It has a unique molecular structure with a controlled side chain distribution, which provides excellent stress crack resistance properties combined with outstanding Long Term Hydrostatic Strength. Applications: Pipes for hot and cold water systems, e.g.: - Hot / cold drinking water distribution - Radiator connections - Heating / cooling applications - Mono- and multi-layer pipe - Industrial applications. Main Characteristics: - Suitable for elevated temperatures without crosslinking - Outstanding taste and odor performance - Excellent processability. Processing Recommendations: DOWLEX 2388 Polyethylene Resin is easy to process on traditional PE processing equipment. Typical extrusion temperatures for processing range from 190 to 230 °C. For further information see our Extrusion Guideline. Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 175.105(c)(5) Consult the regulations for complete details.

DOWLEX™ 2517 Polyethylene Resin is a narrow molecular weight distribution copolymer designed to offer good ESCR and low temperature properties with excellent flexibility. This resin has good processability over a wide range of molding conditions. - Linear Low Density Polyethylene - For lids, housewares and containers - Excellent low temperature flexibility, good ESCR Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - U.S. FDA-DMF - U.S. USP 23 -- Consult the regulations for complete details.

DOWLEX™ 2552E 聚乙烯树脂是专为零部件注塑加工而研制的，具有优异的低温柔软性、抗冲击性能和耐环境应力开裂性能。DOWLEX 2552E 聚乙烯树脂的注塑制品还具有优异的韧性、尺寸稳定性，光泽度高。 备注：当用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，DOWLEX 2552E 聚乙烯树脂应该符合美国食品和药物管理局法规177.1520以及绝大多数欧洲国家的食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 家用器具 - 盖材 - 玩具 - 冬季运动用品 - 工业用盖封材料

DOWLEX™ Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. - Linear Low Density Polyethylene Complies with: - U.S. FDA, FCN 741 - Canadian HPFB No Objection Consult the regulations for complete details.

DOWLEX™ Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. - Linear Low Density Polyethylene Complies with: - U.S. FDA, FCN 741 - Canadian HPFB No Objection Consult the regulations for complete details.

DOWLEX 2606 GC Polyethylene Resinis specifically designed for large/high output cast film lines to make high performance industrial stretch films. Films made from DOWLEX 2606 GC exhibit an excellent balance of processability, mechanical and stretchability performance properties. DOWLEX 2606 GC Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between 10 and 35 microns. Complies with: - EU, No10/2011 - U.S. FDA FCN 741 Consult the regulations for complete details.

DOWLEX 2607 GC Polyethylene Resin is specifically designed for large/high output cast film lines to make high performance industrial stretch films. Films made from DOWLEX 2607 GC Polyethylene Resin exhibit an excellent balance of processability, mechanical and stretchability performance properties. DOWLEX 2607 GC Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between 10 and 35 microns. Complies with: - EU, No10/2011 - U.S. FDA FCN 741 Consult the regulations for complete details.

DOWLEX™ 2610G Polyethylene Resin is specifically designed for large/high output cast film lines to make high performance industrial stretch films. Films made from DOWLEX™ 2610G Polyethylene Resin exhibit an excellent balance of processability, mechanical and stretchability performance properties. DOWLEX™ 2610G Polyethylene Resin is to be used as a core resin in coextruded cast film structures for films in the thickness range between 17 and 35 microns. Applications: - Cast Stretch Wrap Film Complies with: - EU, No 10/2011 - U.S. FDA FCN 1539 Consult the regulations for complete details.

DOWLEX™ 2620 Polyethylene Resin is a narrow molecular weight distribution copolymer designed to offer good ESCR and low temperature properties with excellent flexibility. This resin has good processability over a wide range of molding conditions. - Linear Low Density Polyethylene - For lids, housewares and containers Complies with: - U.S. FDA FCN 1539 - Canadian HPFB No Objection Consult the regulations for complete details.

DOWLEX™ 2629UE 聚乙烯树脂适用于滚塑模塑和注塑模塑，专门用于那些要求优异的抗环境应力开裂性能、抗冲击强度并且翘曲度小、加工性能良好的应用场合。加工和稳定性： DOWLEX™ 2629UE 聚乙烯树脂经过了全面的耐热和耐紫外线稳定化处理，使其加工范围很广，保色能力良好，使用时间长。其以粉料形式供货的产品牌号是DOWLEX™ 2629.10UE 聚乙烯树脂。 应用领域： - 中间体的散装料容器 - 化学品的料桶 - 船只 - 冰箱中的容器 - 鱼箱 - 小型油箱 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA）21 CFR 177.1520(c)3.1a 请查阅法规以获取详尽资料 。

DOWLEX™ 2629UE 聚乙烯树脂用于滚塑和注塑加工，专门应用于那些需要优异的耐环境应力开裂性能和抗冲击性能以及翘曲小和加工性能良好的应用领域。加工和稳定化：DOWLEX™ 2629UE 聚乙烯树脂耐热以及耐紫外线照射，这样经过稳定化之后的产品具有更加广泛的加工范围，保色性好，产品保质期更长。该产品的粉料的牌号为DOWLEX™ 2629.10UE 聚乙烯树脂。 备注：当应用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，DOWLEX™ 2629UE 聚乙烯树脂应该符合美国食品和药物管理局法规177.1520(c)3.1a (带有限制条件)的要求以及欧盟指令2002/72/EC (参阅备注)有关食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 半成品散装材料容器 - 化学品料桶 - 船只 - 冰柜容器 - 鱼箱 - 小型水箱

DOWLEX™ 2631UE 聚乙烯树脂适用于滚塑模塑和注塑模塑，专门用于那些要求优异的加工性能、外观效果并且翘曲度小、机械性能良好的应用场合。加工和稳定性：DOWLEX 2631UE™ 聚乙烯树脂经过了全面的耐热和耐紫外线稳定化处理，使其加工范围很广，保色能力良好，使用时间长。其以粉料形式供货的产品牌号是DOWLEX™ 2631.10UE 聚乙烯树脂。 应用领域： - 玩具 - 工业模制品 - 平面容器 - 旅行拖车的油箱 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA） 21 CFR 177.1520(c)3.1a 请查阅法规以获取详尽资料。

DOWLEX™ 2631UE 聚乙烯树脂适用于滚塑模塑和注塑模塑，专门用于那些要求优异的加工性能、外观效果并且翘曲度小、机械性能良好的应用场合。加工和稳定性： DOWLEX™ 聚乙烯树脂经过了全面的耐热和耐紫外线稳定化处理，使其加工范围很广，保色能力良好，使用时间长。其以粉料形式供货的产品牌号是DOWLEX™ 2631.10UE 聚乙烯树脂。 应用领域： - 玩具 - 工业模制品 - 平面容器 - 旅行拖车的油箱 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA） 21 CFR 177.1520(c)3.1a 请查阅法规以获取详尽资料。

DOWLEX™ 2636G Polyethylene Resin is a cast film extrusion grade suitable for high stiffness film applications. Linear low density Polyethylene/Hexene copolymer. Improved thermal stability for high stiffness film applications. Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ 2645 R Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films. Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delievers very good processability on conventional LLDPE machinery. Applications: - Various industrial and consumer film applications Complies with: - EU, No 10/2011 - U.S. FDA FCN 741 - Complies with ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details

DOWLEX 2645.01G™ Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films (though it is not reccomended for silage stretch film). Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery. DOWLEX 2645.01G Polyethylene Resin contains slip and antiblock additives. Applications: - Various industrial and consumer film Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a. - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. Complies with: - U.S. FDA, FCN 1539 - EU, No 10/2011 - Consult the regulations for complete details.

DOWLEX™ 2645.11GY Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. Complies with: - U.S. FDA, FCN 1539 - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ 2645.11S Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. Complies with: - U.S. FDA, FCN 741 - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ 2645 聚乙烯树脂用于很多种工业用和消费品用薄膜的生产（尽管不建议将其用于牧草拉伸膜）。采用这种树脂制备的薄膜综合了优异的韧性和抗撕裂性能。该产品在普通的LLDPE加工设备上亦具有非常好的加工性能。 应用领域： - 各种工业用薄膜和消费品用薄膜 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA） FCN 741 请查阅法规以获取详尽资料。

DOWLEX™ Polyethylene Resin is designed for the production of a wide variety of film applications. Films made from this resin exhibit a combination of good toughness and tear resistance. Complies with: - U.S. FDA FCN 741 - HPFB (Canada), No Objection - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX 2688G Polyethylene is a Linear Low Density Polyethylene resin designed for applications that require higher toughness and processability. Applications : Industrial and Consumer Film applications and Agricultural Films - High tear and impact strength - Excellent output and bubble stability - Complies with U.S. FDA FCN 1539 - Complies with European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

DOWLEX™ 2689G Polyethylene Resin is an ethylene-octene copolymer produced via INSITE™ Technology from Dow. Main Characteristics: - HDPE with excellent stiffness and processibility Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ 2700G Linear Low density Polyethylene Resin is a special blown film resin designed for the production of high quality pre-oriented films for industrial and consumer packaging applications. Main Characteristics: - Allows high output rates - Excellent pre-orientation capabilities - Provide good toughness properties Complies with: - U.S. FDA FCN 741 - Europe Commission Regulation (EU) No 10/2011 Consult the regulation for complete details.

DOWLEX™ 2740G Polyethylene Resin is suitable for the production of high modulus blown films. The resin offers excellent optical properties and good tear and impact strength and can be used to enable the reduction in gauge of various film structures. Applications: - Various industrial, consumer and specialty films. Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 Consult the regulations for complete details.

DOWLEX™ 2740G Polyethylene Resin is a high performance linear low density polyethylene suitable for the production of tapes and monofilaments used in woven or knitted fabrics. Tapes and monofilaments made from this resin exhibit an excellent tenacity at the required elongation at break values. DOWLEX 2740G Polyethylene Resin can be extruded via the blowing or casting method and tapes can be manufactured using the tape or film stretching process. Applications: - Tapes and Monofilaments Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulations for complete details.

DOWLEX™ 2750ST Polyethylene Resin is suitable for the production of high modulus blown and cast films. The resin offers an excellent balance of tensiles, tear and impact strength with good optics, and can be used to enable the reduction in gauge of various film structures. Applications: - Various industrial, consumer and specialty films. Complies with: - EU, No 10/2011 Consult the regulations for complete details.

DOWLEX™ 3010 Polyethylene Resin is a polyethylene polymer designed to offer high performance properties such as excellent Environmental Stress Crack Resistance (ESCR), tear strength, abrasion resistance, and strong heat seals in thin extrusion coatings. - Linear Low Density Polyethylene - For flexible packaging, overwraps and lamination applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) - Canadian HPFB No Objection (With Limitations) - EU, No 10/2011 - This resin may be used to manufacture articles for use in packing or holding food during cooking. This statement refers to the extraction limitations only, not to the product's physical utility. - Consult the regulations for complete details.

DOWLEX™ 4056.01G 是一种线性低密度树脂，应用于高质量的吹塑薄膜，这些吹塑薄膜要求综合了优异的光学性能、抗撕裂强度、密封性以及优异的加工性能。DOWLEX 4056.01G 所具有的低凝胶含量特性使其特别适合用于复合薄膜以及其他特种包装应用。该树脂含有滑爽剂和防粘连剂。 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA） FCN 741 请查阅法规以获取详尽资料。

DOWLEX™ 4056G R is a linear low density resin designed for high quality blown film applications requiring a combination of excellent optical properties, tear strength, sealability and excellent processability. DOWLEX 4056G is also designed to offer a low gel level making it ideal for use in lamination films and other specialty packaging applications. Complies with: - EU, No 10/2011 - U.S FDA FCN 741 - Complies with ISCC PLUS certification for renewable-based plastics. Consult the regulations for complete details.

DOWLEX™ 4056G REN is a linear low density resin designed for high quality blown film applications requiring a combination of excellent optical properties, tear strength, sealability and excellent processability. DOWLEX 4056G REN is also designed to offer a low gel level making it ideal for use in lamination films and other specialty packaging applications. Complies with: - EU, No 10/2011 - U.S FDA FCN 741 - U.S. FDA-DMF - Complies with ISCC PLUS certification for bio-circular plastics. Consult the regulations for complete details.

DOWLEX™ 4056G是一种线性低密度树脂，应用于高质量的吹塑薄膜，这些吹塑薄膜要求综合了优异的光学性能、抗撕裂强度、密封性以及优异的加工性能。DOWLEX 4056G所具有的低凝胶含量特性使其特别适合用于复合薄膜以及其他特种包装应用。 符合以下法规要求： - 欧盟（EU） No 10/2011 - 美国食品和药品管理局（U.S. FDA） FCN 741 请查阅法规以获取详尽资料。

DOWLEX 5075G Polyethylene Resin is a blown film extrusion linear low density polyethylene resin grade suitable for high toughness and clarity film applications.. Main Characteristics: - Linear Low Density Polyethylene/Octene Copolymer - For high performance film applications Complies with: - U.S. FDA FCN 424. Consult the regulations for complete details.

DOWLEX™ GM 6047B is a Linear Medium Density Polyethylene, 1-Octene Copolymer from Dow. This resin offers good mechanical properties and toughness, with the required features for the production of diapers and products for feminine hygiene. This product is easy to process and has good web stability at high-speed machines. Main Characteristics: - Film for products for adult incontinence - Film for diapers - Film for products for feminine hygiene - Easy to process and good web stability at high-speed machines Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details

DOWLEX GM 6047G Polyethylene Resin is a cast film polyethylene medium density resin designed to improve processing and performance for both breathable and non-breathable backsheet resins in hygiene applications. Main Characteristics - Linear Low Density Polyethylene - Improved processability for cast film - High modulus for downgauged applications - Complies with U.S. FDA 21 CFR 177.1520(c) 3.2a - Complies with European Commission EU No 10/2011 - Consult the regulations for complete details.

DOWLEX™ GM 8051 Polyethylene Resin is designed for use in a wide variety of film applications, in special for FFS and lamination multilayered films combining excellent optical properties, mechanicals and an additive package designed to enhance COF stability. Main Characteristics: - High toughness, processability and optical properties - Fully formulated, enhanced COF stability Complies with: - U.S. FDA FCN 741 Consult the regulations for complete details.