- Injection molding - For injection molded housewares, toys, food containers and pails - Excellent balance of toughness, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.2a - Complies with U.S. FDA -DMF - Complies with Canadian HPFB No Objection - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DMDA-8940 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as housewares, toys, food containers and pails. This resin has been designed to provide an excellent balance of toughness, environmental stress crack resistance and processability.

DOW™ DMDA-8950 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. Main Characteristics - Injection molding - For injection molded thin-wall food containers, including freezer applications - High flow for processing ease - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a - Canadian HPFB No Objection Consult the regulations for complete details.

- Injection molding - For injection molded thin-wall food containers - Excellent processability - Good impact strength and rigidity - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with U.S. FDA DMF - Complies with U.S. FDA 21 CFR 177.1520(c)3.2a - Consult the regulations for complete details. DOW DMDA-8965 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thinwall injection molding applications such as food containers. This resin has been designed to provide good toughness and excellent processability.

- Injection molding - Roll-out trash carts and other large parts - Excellent impact strength, stress crack resistance and processability - Very narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a - Canadian HPFB No Objection - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. DOW DMDB-7950 NT 7 High Density Polyethylene (HDPE) Resin is intended for use in injection molding applications such as roll-out trash carts and other large parts with short molding cycles. It is produced via UNIPOL™ Process Technology from Dow and has been designed to meet the rigorous performance characteristics of impact resistance, environmental stress crack resistance, stiffness, and low warpage, while maintaining excellent moldability.

DOW™ DMDC-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water bottles, where minimizing the contribution of the package to the taste of the product is a requirement. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details

DOW™ DMDD-1210 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water, juice, dairy, and sports drinks, including hot fill and aseptic bottling applications, where minimizing the contribution of the package to the taste of the product and use of slip is a requirement. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - EU, No 10/2011 - Consult the regulations for complete details - Additives: 1500 ppm Slip

Dow DPDA-3220 NT 7 High Density Polyethylene Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilization: Dow DPDA-3220 NT 7 High Density Polyethylene Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy. - Rotational molding or injection molding - For Large Agricultural Tanks, Intermediate Bulk Containers, Potable Water, Chemical Tanks and Industrial Products - Excellent impact strength, stress crack resistance and processability Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

HDPE KS 10100 UE 聚乙烯树脂是一种高密度聚乙烯树脂，加工性能有所提升，应用于室外环境时，抗冲击强度、应力开裂性能和紫外线稳定性均优异，而且可以将翘曲降低至最低水平。 备注： 当应用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，HDPE KS 10100 UE 聚乙烯树脂应该符合美国食品和药物管理局法规177.1520的要求以及绝大多数欧洲国家的食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 垃圾箱 - 大型容器 - 需要高强度的部件

HDPE KT 10000 UE 聚乙烯树脂是一种对紫外线具有稳定性的树脂，分子量分布非常窄。这种树脂的研制目的是为注塑部件提供优异的挺度和良好的抗冲击强度，同时将翘曲降低至最低水平。 备注：当应用于接触食品的应用领域时，在未经改性以及加工流程遵循良好制造规范要求时，HDPE KT 10000 UE 聚乙烯树脂应该符合美国食品和药物管理局法规177.1520的要求以及绝大多数欧洲国家的食品接触法规的要求。请联系距您最近的陶氏代表处以获取有关符合食品接触法令的证明资料。购买商依然负有责任确定其产品的使用是否符合所有相关法规的规定。 应用领域： - 工业零件用的盒子和箱子 - 农场生鲜食品箱和饮料箱 - 塑料桶和水桶

HDPE LP 8000 HD is a High Density Polyethylene Resin specially designed to produce large blow molded parts. This resin offers good processability and excellent parison melt strength, which contributes to uniform wall thickness in large parts. Containers molded with this resin exhibit excellent environmental stress cracking resistance (ESCR), Impact Resistance and Top Load (stackability). Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12. Consult the regulations for complete details.

HDPE LP 8000 is a High Density Polyethylene Resin specially designed to produce large blow molded parts. This resin offers good processability and excellent parison melt strength, which contributes to uniform wall thickness in large parts. Containers molded with this resin exhibit excellent environmental stress cracking resistance (ESCR), Impact Resistance and Top Load (stackability). Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - Europe Commission Regulation (EU) No 10/2011 - Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12.

HDPE NG 7005 is a High Density Polyethylene Resin designed for thin gauge films. This resin offers high melt strength and bubble stability along with good mechanical properties. Main Characteristics: - Complies with Regulation U.S. FDA 21 CFR 177.1520(c)3.2a - Complies with European Commission Regulation (EU) No 10/2011 - Consult the regulation for complete details

符合的业界标准 - ASTM D 3350： 分档 PE335440A DOW TCP-2495 NT 高密度聚乙烯树脂的制备采用了UNIPOL™ 加工技术。该产品专门用于CIC电路的所有导管和电缆的加工，应用于电讯和电力电缆应用领域。原色树脂与色母料共混后，可在现有的导管或管路挤出工艺加工，并适用于所有尺寸规格。

XDMDA-1206 NT 7 Experimental High Density Polyethylene (HDPE) Resin from Dow is intended for use in injection molding applications such as caps and closures and other injection molding applications. This resin has been designed to meet demanding performance requirements such as environmental stress crack resistance, stiffness, impact strength, while maintaining good processing characteristics. - Excellent impact strength, stiffness and stress crack resistance - Excellent processability Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.1a - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.