HANWHA HDPE 3392 is manufactured by Spherilene process and designed for flat yarn(T-die, Cast) of tarpaulin. HDPE 3392 has well balanced property of mechanical strength, stretching and processability. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 3.1.a. Outstanding Properties - Excellent Mechanical Property - Good Stretching - Good Processability Additives - Antioxidant

HANWHA HDPE 7600 is manufactured by Spherilene process and designed for variety of injection application such as silicon cartridges, pails and pallets. HDPE 7600 has well balanced property of mechanical property and processability. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 3.1.a. Outstanding Properties - Excellent Processability - Good Mechanical Property Additives - Antioxidant

CHNA-8600H is a high density polyethylene(HDPE) compound designed for the insulation of coaxial cable and radio frequency(RF) communication cables using a gas injection foaming process. It has excellent electrical properties and provides low attenuation at high frequency. CHNA-8600H is commonly used by blending with CLNA-8600L prior to extrusion. To obtain optimal cellular structure, a small amount of nucleating agent is recommended. Recommended blend ratios of 8600H/8600L/Nucleating agent are 68 to 88 / 30 to 10 / 2%. 8600H&L meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - CHNA-8600H : ASTM D1248 Type IV, Class A, Category 3 - CLNA-8600L : ASTM D1248 Type I, Class A, Category 3 Applications 8600H&L can be used coaxial cable and radio frequency(RF) communication cables using a gas injection foaming process.

CLNA-8600L is a low density polyethylene(LDPE) compound designed for the insulation of coaxial cable and radio frequency communication cables. It has excellent electrical properties. CLNA-8600L is commonly used by blending with CHNA-8600H prior to extrusion. To obtain optimal cellular structure, a small amount of nucleating agent is recommended. Recommended blend ratios of 8600H/8600L/Nucleating agent are 68 to 88 / 30 to 10 / 2%. 8600H&L meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - CHNA-8600H : ASTM D1248 Type IV, Class A, Category 3 - CLNA-8600L : ASTM D1248 Type I, Class A, Category 3 Applications 8600H&L can be used coaxial cable and radio frequency(RF) communication cables using a gas injection foaming process.

CHBA-8241BK is a black high density polyethylene(HDPE) compound designed for power & communication cable jacketing applications. It combines excellent physical properties with good processing. It provides excellent environmental stress crack resistance(ESCR). It contains 2.5 % well-dispersed carbon black to ensure excellent weathering resistance. CHBA-8241BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ASTM D1248 Type III, Class C, Category 5, Grade J4, E8, E9, W8, W9 - BS 6234: Type H03C, TS2 - IEC 60502, ST7 - IEC 60840, ST7 - DIN VDE 0276-620, Type DMP2, DMP9 - ISO 1872-PE, KCHL, 45 D-006 - NF C32-060 Applications CHBA-8241BK can be used for jacketing of power and communication cables.

CHNA-8380 is a high molecular weight, high density polyethylene insulation compound especially designed for high-speed wire insulating extrusion process. It provides excellent processability, environmental and thermal stress cracking resistance. It meets major international aging test specification for both solid and foam/skin insulation. CHNA-8380 meets the applicable requirements as below when processed using sound extrusion practice and and testing procedure: - ASTM D1248 Type III, Class A, Category 4, Grade E8, E9 - ICEA-S84-608 - BS 6234 : Type H03 - IEC 60708 - ISO 1872-PE, KCHL, 45 D-006 - NF C32-060 - DIN VDE 0818 Applications CHNA-8380 can be used for the full range of telephone cable insulation including air-core, jelly-filled and LAN cable.

CHNA-8380L is a high molecular weight, high density polyethylene insulation compound specially formulated to provide an excellent oxidative stability, physical/electrical properties. It provides superior long term aging performance especially in jelly-filled cable applications. It meets Telcordia(Bellcore) aging test requirements, as well as all major international aging test specifications for both solid and foam/skin insulation. CHNA-8380L meets the applicable requirements as below when processed using sound extrusion practice and and testing procedure: - ASTM D1248 Type III, Class A, Category 4, Grade E8, E9 - Telcordia GR-421(Bellcore) - BS 6234 : Type H03 - IEC 60708 - ISO 1872-PE, KCHL, 45 D-006 - NF C32-060 Applications CHNA-8380L can be used for the full range of telephone cable insulation including air-core and jelly-filled and LAN cable.

CHYA-870F is a high density polyethylene cellular compound designed for Foam/Skin telephone cable and other cellular insulation applications. It contains controlled amount of chemical blowing agent that gives up to 50% cellular expansion through temperature controlled extrusion. It provides excellent processability and electrical/physical properties. CHYA-870F meets the applicable requirements as below when processed using sound extrusion practice and and testing procedure: - ASTM D1248 Type III, Category 4 - ICEA-S84-608 Applications CHYA-870F can be used for foamed data cable insulation including air-core and jelly-filled.

CLBA-8450BK is a black linear low density polyethylene(LLDPE) compound produced from resin made by the UNIPOL process. It has broad molecular weight distribution. It provides excellent processability, lower shrinkage, free of die drool, excellent environmental stress crack resistance (ESCR) and good physical properties. It contains 2.5 % well-dispersed carbon black to ensure excellent weathering resistance. CLBA-8450BK meets the applicable requirements as below when processed using sound extrusion practices: - ASTM D1248 Type I, Class C, Category 4, Grade E4, E5, J3, W2, W3, W4 - BS 6234: Type H03C, TS2 - IEC 60502, ST3, ST7 - IEC 60840, ST3, ST7 - ICEA : S-61-402, S-84-608-1988 - Telcordia GR-421 - ANSI : C8.35 Applications CLBA-8450BK can be used for jacketing of power and communication cables.

CLBA-8923BK is a black colored, peroxide contained crosslinkable, low density polyethylene compound with 0.5% of carbon black designed for outdoor cable insulation. It has an excellent tracking resistance, excellent processability and scorch stability. CLBA-8923BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - KSC3327 - ICEA S 66-524/NEMA WC7 Applications CLBA-8923BK can be used for the insulation of outdoor weather-resistant crosslinked power cable up to 33kV.

CLBA-8924BK is a black colored, peroxide contained crosslinkable, low density polyethylene compound with carbon black, designed for outdoor cable insulation. It has an excellent weather resistance and good processability. CLBA-8924BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - KSC3327 - ICEA S 66-524/NEMA WC7 Applications CLBA-8924BK can be used for the insulation of outdoor weather-resistant crosslinked power cable up to 35 kV.

CLBB-850BK is a black low density polyethylene(LDPE) compound designed for cable jacketing applications. It provides an excellent environmental stress crack resistance(ESCR), low temperature performance, processability and good physical properties. It contains well-dispersed carbon black to ensure excellent weathering resistance. CLBB-850BK meets the applicable requirements as below when processed using sound extrusion practice and and testing procedure: - ASTM D1248 Type I, Class C, Category 5, Grade E5, J1, J3 - BS 6234: Type 03C, TS2 - IEC 60502, ST3, ST7 - IEC 60840, ST3, ST7 - ICEA : S-61-402, S-84-608-1988 - Telcordia GR-421 - ANSI : C8.35 Applications CLBB-850BK can be used for jacketing of power and communication cables. It is mainly used for communication cables such as aircore and jelly-filled construction, and in both aerial and buried applications.

CLBB-8923BK is a black colored, peroxide contained crosslinkable, low density polyethylene compound with carbon black designed for outdoor cable insulation. It has an excellent tracking resistance, excellent processability, cure properties and scorch stability. CLBB-8923BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - KSC3327 - ICEA S 66-524/NEMA WC7 Applications CLBB-8923BK can be used for the insulation of outdoor weather-resistant crosslinked power cable up to 33kV.

CLNA TR-8142EC is a water tree retardant, crosslinkable, low density polyethylene compound designed for medium voltage power cable insulation. Its permanent tree-retardant additive provides improved performance in medium voltage power cable in service involving exposure to water. It has an extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels. CLNA TR-8142EC meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ANSI/ICEA S-94-649, S-66-524 - AEIC CS5 /AEIC CS8 - IEC 60502, 60840 - CENELEC HD 620 S1, 632 S1 - BS 6622 - DIN VDE0207, 2XI1 Applications CLNA TR-8142EC can be used for the insulation of medium voltage power cables, i.e. up to 72 kV or for corresponding stresses.

CLNA-8141EHV is a crosslinkable, low density polyethylene compound designed for extra high voltage power cable insulation requiring a high degree of cleanliness. It has an extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels. CLNA-8141EHV meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - IEC 62067 - ANSI/ICEA 108-720-2004 Applications CLNA-8141EHV can be used for the insulation of extra high voltage power cables, i.e. up to 230 kV or for corresponding stresses (maximum working stress, based on U0 , < 10 kV/mm).

CLNA-8141SC is a low density, crosslinkable polyethylene compound designed for high voltage power cable insulation requiring a high degree of cleanliness. It has an extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels. CLNA-8141SC meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649, S-93-639 - HD 620 S1, 632 S1 - AEIC CS7, CS8 - BS 6622 - IEC 60502, 60840 Applications CLNA-8141SC can be used for the insulation of high voltage power cables, i.e. up to 170 kV or for corresponding stresses(maximum working stress, based on U0, <8 kV/mm).

CLNA-8141SEHV is a crosslinkable, low density polyethylene compound designed for extra high voltage power cable insulation requiring a high degree of cleanliness. It has an extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels. CLNA-8141SEHV meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - IEC 62067 - ANSI/ICEA 108-720-2004 Applications CLNA-8141SEHV can be used for the insulation of extra high voltage power cables, i.e. up to 550 kV or for corresponding stresses (maximum working stress, based on U0 , < 14 kV/mm).

CLNA-8262 is a linear low density polyethylene (LLDPE) produced by the UNIPOL process. It can be used as base resin of silane crosslinked low voltage cable insulation by Monosil, Dry silane and Siloxene process. It offers excellent scorch stability and cure property. It contains controlled amount of antioxidant. CLNA-8262 meets the applicable requirement as below when processed using sound extrusion practice and testing procedure: - ASTM D1248 Type I, Class A, Category 3 Applications CLNA-8262 can be used as base resin of silane-crosslinked low voltage cable insulation, high speed telephone cable insulation and high frequency coaxial inner skin.

CLNA-8400 is a linear low density polyethylene(LLDPE) produced by the UNIPOL process. Its broad molecular weight distribution offers an excellent processability and scorch stability. It combines excellent electrical properties with outstanding stress crack resistance. CLNA-8400 meets the applicable requirement as below when processed using sound extrusion practice and testing procedure: - ASTM D1248 Type I, Category 4, Grade E4, E5 Applications CLNA-8400 can be used as base resin of silane-crosslinked low voltage cable insulation, high speed telephone cable insulation and high frequency coaxial inner skin. CLNA-8400 is able to be used for natural colored jacket, if it mixed with UV stabilizer.

CLNB-8141S is a crosslinkable, low density polyethylene compound designed for medium voltage power cable insulation requiring a high degree of cleanliness. It has an extremely low level of contamination and proper balance of non-staining antioxidant and peroxide to ensure thermal stability and optimum cure levels. CLNB-8141S meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ICEA S-66-524, S-94-649, S-93-39 - IEC 60502 - HD 620 S1, 632 S2 - AEIC CS7, CS8 Applications CLNB-8141S can be used for the insulation of medium voltage power cables, i.e. up to 72 kV or for corresponding stresses(maximum working stress, based on U0 , < 5 kV/mm).

CMBA-8240BK is a black medium density polyethylene (MDPE) compound designed for power & communication cable jacketing applications. It combines excellent physical properties with good processing. It provides excellent resistance to environmental stress cracking (ESCR) and thermal oxidative degradation. It contains 2.5% well-dispersed carbon black to ensure excellent weathering resistance. CMBA-8240BK meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: - ASTM D1248 Type II, Class C, Category 5, Grade J4, E8, E9 - BS 6234: Type H03C, TS2 - IEC 60502, ST3, ST7 - IEC 60840, ST3, ST7 - ISO 1872-PE, KCHL, 33 D-006 - NF C32-060 Applications CMBA-8240BK can be used for jacketing of power and communication cables.