DOW™ LLDPE 1048P is a butene copolymer linear low density polyethylene resin. Main Characteristic: - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Applications - Blown film - Cast film

LLDPE 1050B is a Linear Low Density Polyethylene Resin 1-Butene copolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for stretch and health & hygiene applications. Complies with: - European Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulation for complete details

Dow LLDPE 1613.11 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution process. This resin is designed to be used in blown extrusion to produce films for industrial applications and consumer packaging. It contains slip and antiblock additives. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

LLDPE 1613.11T is a Linear Low Density Polyethylene Resin, 1-Hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging.

Dow LLDPE 1613 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution process. This resin is designed to be used in blown extrusion to produce films for industrial applications and consumer packaging. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 (See Notes) Consult the regulations for complete details.

LLDPE 1613.11T is a Linear Low Density Polyethylene Resin, 1-Hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging. Complies with: - Europe Commission Regulation (EU) No 10/2011 (See NOTES) - U.S. FDA 21 CFR 177.1520(c )3.2a Consult the regulations for complete details.

Dow LLDPE 1630 is a Linear Low Density Polyethylene Resin, 1-hexene copolymer, produced in the Solution Process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging. Complies with: - U.S. FDA, 21 CFR 177.1520(c)3.2a - Europe EU Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

LLDPE 1630T is a Linear Low Density Polyethylene Resin, 1-hexene, 1-Octene terpolymer, produced in the Solution process. This resin is designed to be used in cast extrusion to produce films for industrial applications and consumer packaging.

LLDPE 1646 is a polyethylene resin for blown film extrusion. Main Characteristics: - Industrial and consumer blown film applications Complies with: - EU, No 10/2011 - U.S. FDA FCN 741 Consult the regulations for complete details.

LLDPE 1648 is a linear low density polyethylene, hexene copolymer, designated for cast stretch film applications, such as industrial pallet wrap. - Linear low density polyethylene - For industrial pallet wrap stretch film applications Complies with : - US FDA 21 CFR 177.1520 ( c ) 3.2a - EU, No 10/2011 - Consult the regulations for complete details

DOW™ DFDA-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection (with Limitations) - JHOSPA (Japan Hygienic Olefin and Styrene Plastics Association) Consult the regulations for complete details.

DOW DFDA-7059 NT 7线性低密度聚乙烯树脂是一种乙烯-丁烯共聚物，颗粒状，抗氧化剂。这种树脂也适用于软管和管道应用。 主要特点： ·高透光率 ·高拉伸强度 ·高拉伸延伸率 ·抗穿刺性好 法规符合： · U.S. FDA 21 CFR 177.1520(c) 3.2a · EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details

DOW™ DFDC-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form - TNPP (Tris(nonylphenyl) phosphite) free formulation Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a Consult the regulations for complete details.

DOW™ DFDD-7080 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a (with Restrictions) Consult the regulations for complete details.

DOW™ DFDE-7087 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a (with Restrictions)

DOW™ DFDF-7047 NT7 linear low density polyethylene is an ethylene-butene copolymer designed for blown film applications. This resin is formulated with a TNPP (Tris-nonylphenyl Phosphite) free additive package. Main Characteristics: - Butene linear low density polyethylene - Blown film extrusion - Pellet form Complies with: - EU, No 10/2011 - U.S. FDA, 21 CFR 177.1520(c)3.2a Consult the regulations for complete details.

DOW DNDA-1055 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength. Main Characteristics: - Excellent processability - Good low temperature impact strength - Balanced density and melt index Complies with: - U.S. FDA 21 CFR 177/1520(c)3.1a - Canadian HPFB No Objection Consult the regulations for complete details.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with FDA-DMF - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-1081 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

- Injection molding - Lids - Excellent processability with good low temperature impact strength and rigidity - Very narrow molecular weight distribution - Complies with EU, No 10/2011 - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Consult the regulations for complete details. DOW DNDA-1082 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity.

DOW™ DNDA-1088 NT 7 Linear Low Density Polyethylene (LLDPE) is produced via UNIPOL™ Process Technology and is intended for high-speed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability, impact strength, and rigidity. Overview: - Injection molding - Lids - Excellent processability with good impact strength and rigidity - Narrow molecular weight distribution Complies with: - U.S. FDA 21 CFR 177.1520(c )3.1a - Europe Commission Regulation (EU) No 10/2011 (See NOTES) Consult the regulations for complete details.

- Injection molding - Large industrial containers and trash cans - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with -- U.S. FDA 21 CFR 177.1520 (c)3.1a -- CANDIAN HPFB NO OBJECTION ( WITH LIMITATIONS) -- EU, No 10/2011 -- U.S. FDA -DMF -- Consult the regulations for complete details. DOW DNDA-7144 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for use in injection molding applications such as large industrial containers and trash cans. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

- High melt strength - Excellent low temperature toughness - Outstanding environmental stress crack resistance - Exceptional flex life - Industrial Standards Compliance: -- ASTM D3350: cell classification PE123110A - Complies with: -- U.S. FDA 21 CFR 177.1520 (c) 3.1a -- US FDA-DMF -- Canadian HPFB No Objection (with limitations) -- EU, No 10/2011 -- Consult the regulations for complete details. DOW DNDA-7340 NT 7 Linear Low Density Polyethylene (LLDPE) Resin offers outstanding flex life, toughness and environmental stress crack resistance (ESCR) and is well-suited for use in blow molding applications such as small, squeezable bottles, as well as, extruded flexible hoses and, tubing. Offering high melt strength, excellent toughness and outstanding ESCR, DOW DNDA- 7340 NT 7 LLDPE resin also is well-suited for use in large blow molded parts, such as drum liners. Additionally, It may also be used in certain sheet and tubing applications where these properties are also important.

- Injection molding - General purpose applications - Excellent low temperature impact strength, rigidity, stress crack resistance and processability - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Complies with U.S. FDA-DMF - Complies with CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - Consult the regulations for complete details. DOW DNDA-8320 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using the UNIPOL™ PE Process Technology and is intended for use in general purpose injection molding applications. This resin has been designed to have excellent impact strength, rigidity, environmental stress crack resistance and processability.

DOW DNDA-8335 NT 7 线性低密度聚乙烯 (LLDPE) 树脂的制备采用了UNIPOL™ PE 工艺技术，适用于通用的注塑加工。这种树脂具有优异的抗冲击强度、刚性、耐环境应力开裂性能和加工性能。 - 注塑 - 通用型 - 优异的低温抗冲击强度、耐应力开裂性能和加工性能 - 分子量分布非常窄 符合美国食品和药物管理局法规 21 CFR 177.1520 (c)3.1a的要求 - EU Food Contact 请查询法规以获取完备的细节资料。

- Injection molding - Lids - Excellent processability with good low temperature impact strength - Very narrow molecular weight distribution - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with CANADIAN HPFB NO OBJECTION (With Limitiations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW DNDB-1077 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is intended for highspeed injection molding of thin-walled parts such as downgauged lids. This resin has been designed to have an excellent balance of processability and impact strength.

DNDB-7147 NT 7 线性低密度聚乙烯 (LLDPE) 树脂的制备使用了UNIPOL™ PE 工艺技术，用于诸如食品容器、家用器具以及盖材的注塑加工。这种树脂在抗冲击强度、刚性、耐环境应力开裂性能和加工性能之间具有优异的平衡性。 主要特性： - 注塑 - 优异的低温抗冲击强度、刚性、耐应力开裂性能和加工性能 - 分子量分布非常窄 - 符合美国食品和药物管理局法规 21 CFR 177.1520(c)3.1a的要求 请查询法规以获取完备的细节资料。

符合的业界标准 - ASTM D 3350： 分档 PE123110A - 符合美国食品和药物管理局法规 21 CFR 177.1520 (c) 3.1a的要求 - EU, No 10/2011 - 请查询法规以获取完备的细节资料。 DOW DNDB-7441 NT 7 线性低密度聚乙烯树脂的制备使用了UNIPOL™ 工艺技术。该产品应用于软管和管件领域，亦用于密封垫片、螺旋缠绕软管和波纹管的加工。该产品牵伸性能好，熔体不易破裂，还具有低温韧性，亚光表面效果均匀，挠曲寿命优异。与相同密度的常规高压、低密度聚乙烯树脂相比，其模量（挺度）要高50%。该产品特别适宜于异型材挤出，这种加工要求耐应力开裂、耐挠曲磨损以及容易挤出加工。亦可将其作改性剂，与柔软的共聚物共混，比如乙烯-醋酸乙酯（EVA）和乙烯-丙烯酸乙酯（EAA）等，以提高刚性。

DOW GRSN-2070 NT 线性低密度聚乙烯粉料料的制备使用了UNIPOL™ 工艺技术。这种粉料产品应用于色母料和母料的生产。

Overview: - Granular form - Carrier resin for masterbatch systems Complies with: - U.S. FDA 21 CFR 177.1520 (c)3.2a - European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details. DOW GRSN-9802 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN- 9802 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Granular form - Carrier resin for masterbatch systems - Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW GRSN-9820 NT 7 Linear Low Density Polyethylene (LLDPE) Resin is produced using UNIPOL™ PE Process Technology and is supplied in granular form. This resin is specifically designed as a carrier resin for color concentrates and other masterbatch systems. The fine particle size reduces the need for grinding, and the high surface area of granular resin allows for more uniform dispersion of concentrate in the final product. GRSN-9820 NT 7 is compatible with polyethylene and polypropylene resins and can be used in a wide variety of fabrication processes.

- Octene copolymer - Linear Low Density Polyethylene - For blown and cast film applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a. Consult the regulation for complete details.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.

- Octene Copolymer - Linear Low Density Polyethylene - For high speed blown film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.