Riblene FF 30 BA is characterised by a good melt strength leading to a good bubble stability during extrusion. Films manufactured by Riblene FF 30 BA are easily heat shrinkable and characterised by good optical and mechanical properties. Riblene FF 30 BA is recommended for the production of shrink film for medium and light loads, for lamination film and for blend.

Sustainability
The product Riblene FF 30 BA ‘Bio attributed’ is a highly sustainable LDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Riblene FF 30 BA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is a high molecular weight low density polyethylene for blown film technology. The production of Riblene FF 30 BA allows to contribute to the circular economy, since the bionafta used derives from renewable resources (e.g. vegetable oils). Riblene FF 30 BA will be bio attributed for 100%. The exact amount of “bio attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.