Texin® 255D
Texin 255D resin is a polyester-based thermoplastic polyurethane with a Shore hardness of approximately 55D*. It can be processed by injection molding; extrusion processes are not recommended.
Properties / Applications:
Texin 255D natural color resin complies with FDA food-contact regulations 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber Articles Intended for Repeated Use), for use in articles that contact food except articles used for packing or holding food during cooking, subject to the limitations of these and any other applicable regulations. Texin 255D resin offers excellent fuel and oil resistance, as well as outstanding abrasion resistance, impact strength, toughness, and flexibility. Typical applications include toplifts, seals, gaskets, sleeves, casters, and gears. As with any product, use of Texin 255D resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
Properties / Applications:
Texin 255D natural color resin complies with FDA food-contact regulations 21 CFR 177.1680 (Polyurethane Resins) and 177.2600 (Rubber Articles Intended for Repeated Use), for use in articles that contact food except articles used for packing or holding food during cooking, subject to the limitations of these and any other applicable regulations. Texin 255D resin offers excellent fuel and oil resistance, as well as outstanding abrasion resistance, impact strength, toughness, and flexibility. Typical applications include toplifts, seals, gaskets, sleeves, casters, and gears. As with any product, use of Texin 255D resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
一般属性
使用 Prospector 建立免費帳戶時，可造訪 Texin® 255D 的完整資料表詳細資訊。您將找到有關物理、機械和硬度規格的完整資訊
物料形态
已商用：当前有效
文档
可用性
北美洲, 欧洲
用途
车轮
加工方式
注射成型
其他属性
特性, 机构评级, 外观, 密度 / 比重, 密度, 流动方向收缩, 垂直流动方向的收缩, 收缩率, 弯曲模量, 弯曲模量, 剪切强度, 泰伯耐磨性, 50%拉伸应力, 拉伸应力（在100％时）, 拉伸应力（在100％时）, 300%时拉伸应力, 300%时拉伸应力, 拉伸屈服强度, 拉伸屈服应力, 断裂伸长率, 拉伸断裂应变, 撕裂强度, 撕裂强度, 压缩永久变形, 压缩永久变形, 巴肖氏弹性, 装有测量仪表的落镖冲击, 肖氏硬度, 肖氏硬度, DTUL (66 psi) - 未退火, DTUL (0.45 MPa) 未退火, 脆化温度, 脆化温度, 玻璃转化温度, 维卡软化温度, 维卡软化温度, CLTE，流动, 空气中拉伸强度的变化率, 空气中拉伸强度的变化率, 空气中极限伸长率的变化率, 在空气中断裂时拉伸应力变化, 空气中硬度计硬度的变化率, 空气中邵氏硬度的变化率, 拉伸强度的变化率, 拉伸强度的变化率, 极限伸长率的变化率, 断裂时拉伸应力变化, 硬度计硬度的变化率, 邵氏硬度变化, 体积变化, 体积变化, UL 阻燃等级, 其他性能, 干燥温度, 干燥时间, 建议的最大水分含量, 建议注射量, 建议的最大回制料比例, 料筒后部温度, 料筒中部温度, 料筒前部温度, 射嘴温度, 加工（熔体）温度, 模具温度, 注塑压力, 锁模力, 螺杆长径比, 螺杆压缩比, 注射说明
加工
Find specific processing information for Texin® TPU as well as general information for the 热塑性聚氨酯弹性体（聚酯） generic family. 注册 或 登录 了解更多信息。
