Thermoplastic Elastomer (TPE) by HEXPOL TPE
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Dryflex® 500300S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500350S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500400S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500450S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500500S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500550S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500551 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 500600S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500650S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500700S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500701 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 500750S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500800S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500850 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 500850S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 500900 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 500900S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 50225 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 502300S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502350S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502400S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502450S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502500S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502550S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502600S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502650S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502700S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502750S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502800S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502850S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 502900S | América do Norte |
The 500S series is very favourable when transparency and good scratch resistance are required, as well as when there are high surface finish requirements. Unfilled grades have excellent flow and mechanical properties, such as elongation, compression set, tensile and tear strength.
The low density entails lower weight compared to the 600S and 660S series. Unfilled compounds are available in hardness from 0 Shore A to 55 Shore D in translucent and black colours but they can easily be coloured in any shade.
|
Dryflex® 50670 | América do Norte |
Due to their efficient processing, high performance and recyclability, Dryflex Thermoplastic Elastomers (TPEs) have made significant progress in proving themselves as a quality replacement for vulcanised rubber in window and door sealing applications.
Colour and co-extrusion possibilities have further enhanced the design possibilities for gaskets and seals made from TPE. New technologies such as Dryflex XP foamable TPEs and higher temperature resistant grades are providing materials which deal with design, performance and the environmental needs of the future.
We have supplied compounds for gaskets and weatherstrip extrusion for many years and are a trusted partner to the construction industry.
Today, we continue to develop technical material solutions to meet every application need. Some of the potential property spectrum and possibilities are shown below.
|
Dryflex® 50678 A2 | América do Norte |
Description: Thermoplastic Elastomer, TPS-SBS
Colour: Black, but can easily be coloured
Form: Free flowing pellets
Service Temperature Range: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.
|
Dryflex® 50682 | América do Norte |
Description: Thermoplastic Elastomer, TPS-SEBS
Service Temperature: -50 to +125°C (unstressed material)
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Recycling: 100% recyclable
|
Dryflex® 50890 | América do Norte |
Description: Thermoplastic Elastomer, TPS-SBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (unstressed material)
Recycling: 100% recyclable
|
Dryflex® 51309 | América do Norte |
Dryflex 51309: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 70 Shore A
Service Temperature Range: -50 to +120°C (Unstressed Material).
Colour: Natural, but can easily be coloured in any shade
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone-/UV- Resistance: Excellent
Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils)
Recycling: 100% recyclable
Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
Bonds to: PP, PE
|
Dryflex® 51331 SE | América do Norte |
Dryflex 51331 SE: Thermoplastic Elastomer
Base Material: TPS-SEBS
Hardness: 50 Shore A
Service Temperature Range: -50 to +125°C (Unstressed Material).
Colour: Natural
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Excellent
Ozone / UV Resistance: Excellent
Chemical Resistance: Moderate (excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% recyclable
Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
Bonds to: PP, PE
|
Dryflex® 51395 V | América do Norte |
Dryflex 51395 V: Thermoplastic Elastomer
Base Material: TPV
Hardness: 50 Shore D
Service Temperature: -50°C to +135°C
Colour: Black, but available in any colour shade
Presentation: Free flowing pellets. May require pre-drying before processing.
Weather Resistance: Excellent
Ozone-/UV- Resistance: Excellent
Chemical Resistance: Excellent
Recycling: 100% recyclable
Mould Shrinkage (linear): Approx. 0.75 - 2% depending on e.g. shape of the detail and placement of gate
|
Dryflex® 51506 SB | América do Norte |
Dryflex 51506 SB: Thermoplastic Elastomer
Base Material: TPS-SBS
Hardness: 60 Shore A
Service Temperature Range: -50 to +75°C (Unstressed Material)
Colour: Black
Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions
Weather Resistance: Moderate
Ozone / UV Resistance: Moderate
Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils)
Recycling: 100% Recyclable
Mould Shrinkage: Approximately 0.75 - 2% depending on shape of
the detail and placement of the gate
Bonds to: PP, PS
|
Dryflex® 51528 A2 | América do Norte |
Description: Thermoplastic Elastomer, TPS-SBS
Colour: Natural, but can easily be coloured
Form: Free flowing pellets
Service Temperature: -50 to +125°C (Unstressed Material)
Recycling: 100% Recyclable
Special Features: This material has good adhesion to PC/ABS, ABS, PC and other similar polar substrates.
|