Thermoplastic Elastomer (TPE): POP
Produto | Disponibilidade | Descrição do produto |
---|---|---|
AFFINITY™ 1850G CIR | América do Norte |
AFFINITY* PL 1850G CIR Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging.
- High performance sealant layer in flexible packaging
- Excellent optics, low temperature seal initiation and abuse resistance
Complies with:
- U.S. FDA FCN 424
- EU, No 10/2011.
- Complies with ISCC PLUS certification for circular plastics
Consult the regulations for complete details.
|
AFFINITY™ EG 8100G | América do Norte |
- Plastômero para fins gerais
- Excelentes propriedades de impacto em blendas com polipropileno e polietileno
- Altamente flexível com boa recuperação elástica
- Alta claridade
- Respirável (altas taxas de transmissão de O2 e CO2)
- Selabilidade a baixa temperatura
- Atende à regulamentação U.S. FDA FCN 424 (Veja NOTAS 1)
- Consulte as regulamentações para obter mais detalhes. (Veja NOTAS 2)
O Plastômero Poliolefínico (POP) AFFINITY* EG 8100G é produzido com a Tecnologia INSITE*. É um copolímero de etileno-octeno de uso geral com alta flexibilidade e elasticidade. O AFFINITY EG 8100G pode ser utilizado em filmes monocamada e coextrusados e em blendas com outras poliolefinas para melhorar a claridade, selabilidade e resistência da estrutura.
NOTAS:
(1) Quando utilizada sem modificações para aplicações de contato com alimentos, esta resina atende à Lei Federal de Alimentos, Medicamentos e Cosméticos (Federal Food, Drug, and Cosmetic Act) como uma substância para contato com alimentos (FCN) como resultado de uma Notificação de Pré-Comercialização com data de vigência de 7 de outubro de 2004 conforme o FCN 424. Esta notificação permite o uso deste produto como artigos ou componentes de artigos utilizados em contato com todos os tipos de alimentos conforme as Condições de Uso de A até H descritas na Tabela 2 de 21 do CFR § 176.170(c) do U.S. FDA.
(2) É responsabilidade do fabricante de artigos de contato com alimentos garantir que o artigo é adequado para o uso pretendido. Os fabricantes devem estar atentos ao fato de que os alimentos com alto teor de óleo podem comprometer a integridade da embalagem.
|
AFFINITY™ EG 8200G | América do Norte |
AFFINITY* EG 8200G Polyolefin Plastomer is produced via INSITE* Technology from Dow Plastics. This is an ethylene alpha-olefin copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer cast film and in blends with other polyolefins to enhance clarity, sealability and toughness of structure.
- General purpose plastomer
- Excellent impact properties in blends with polypropylene and polyethylene
- Excellent flow characteristics
- Highly flexible with good elastic recovery
Complies with:
- U.S. FDA FCN 424
- Canadian HPFP No Objection
Consult the regulations for complete details.
|
AFFINITY™ GA 1875 | América do Norte |
Complies with:
- EU, No 10/2011
- U.S. FDA 21 CFR 175.105(c)(5)
- Consult the regulations for complete details.
|
AFFINITY™ GA 1900 | América do Norte |
Poliolefina de ultra-alta claridade, baixa densidade e baixa viscosidade
- Excelente estabilidade térmica
- Baixo Tg (excelentes propriedades a baixas temperaturas)
- Excelente flexibilidade
- Não corrosivo
- Excelente cor e odor
- Excelente compatibilidade com uma ampla gama de polímeros.
- Baixa cristalinidade (pode absorver muita carga)
- Baixa Densidade (melhor rendimento)
- Excelente adesão a diversos substratos, quando formulada
Atende à:
- U.S. FDA FCN 424 (VEJA NOTAS)
Consulte as regulamentações para obter mais detalhes.
O Plastômero Poliolefínico (POP) AFFINITY* GA 1900 é produzido com a Tecnologia INSITE* da Dow Plastics. Este produto pode ser usado em aplicações como modificação polimérica (i.e. melhoria de fluidez e de propriedades), carrier de masterbatch/aditivo e adesivos a quente (hot melt).
|
AFFINITY™ GA 1900K | América do Norte |
- Ultra high clarity, low density, low viscosity polyolefin
- Excellent thermal stability
- Low Tg (Excellent low temperature properties)
- Excellent flexibility
- Non corrosive
- Excellent color and odor
- Excellent compatibility with a wide range of polymers
- Low crystallinity (can be heavily filled)
- Low density (better mileage)
- Excellent adhesion to diverse substrates when formulated
AFFINITY™ GA 1900K Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), and masterbatch/additive carrier
|
AFFINITY™ GA 1950 | América do Norte |
Poliolefina de ultra-alta claridade, baixa densidade e baixa viscosidade
- Excelente estabilidade térmica
- Baixo Tg (excelentes propriedades a baixas temperaturas)
- Excelente flexibilidade
- Não corrosivo
- Excelente cor e odor
- Excelente compatibilidade com uma ampla gama de polímeros.
- Baixa cristalinidade (pode absorver muita carga)
- Baixa Densidade (melhor rendimento)
- Excelente adesão a diversos substratos, quando formulada
Atende à:
- U.S. FDA FCN 424
Consulte as regulamentações para obter mais detalhes.
O Plastômero Poliolefínico (POP) AFFINITY* GA 1950 é produzido com a Tecnologia INSITE* da Dow Plastics. Este produto pode ser usado em aplicações como modificação polimérica (i.e. melhoria de fluidez e de propriedades), carrier de masterbatch/aditivo e adesivos a quente (hot melt).
|
AFFINITY™ HT1285G | América do Norte |
AFFINITY* HT1285G Polyolefin Plastomer (POP) is specifically designed as a high performance sealant for demanding packaging applications. AFFINITY HT 1285G provides high packaging integrity through improved hot tack strength, enhanced caulkability, superior seal though contamination, and low temperature seal initiation. It helps enable hermetic packaging on today's high speed packaging lines or with demanding substrates, and supports reducing sealant failure and potential related food waste. AFFINITY HT 1285G has been developed for processing on Cast, Blown, and Extrusion Coating film production lines.
- High integrity sealant layer in flexible packaging
- Low seal initiation temperature
- Excellent hot tack strength
- Excellent taste and odor profile
- Superior seal through contamination
Complies with:
- U.S. FDA FCN 424
- EU, No 10/2011
Consult the regulations for complete details.
|
AFFINITY™ KC 8852G | América do Norte |
AFFINITY™ KC 8852G Polyolefin Plastomer (POP) é produzida via Tecnologia INSITE™. É um copolímero de etileno-octeno que oferece excelente desempenho de "cling", óticas e resistência em aplicações de filmes stretch.
- Excelente propriedade de "cling"
- Excelentes propriedades óticas
- Excelente tenacidade
Atende a:
- U.S. FDA FCN 424
- Canadian HPFB sem objeções
Consulte regulamentações para obter maiores detalhes.
|
AFFINITY™ PF 1140G | América do Norte |
AFFINITY™ PF 1140G Polyolefin Plastomer (POP) é produzido via Tecnologia INSITE™. É uma resina de etileno alfa-olefina projetada para ser usada em uma variedade de aplicações incluindo empacotamento automático FFS e embalagens de produtos frescos. Esta resina possui excelente compatibilidade com outras poliolefinas, permitindo mistura e coextrusão eficientes.
- Resina de filme soprado de alto desempenho para embalagens flexíveis
- Excelente resistência ao abuso
- Baixa temperatura de início de selagem
- Excelentes óticas
Atende a:
- U.S. FDA FCN 424
- Canadian HPFB sem objeções
- EU, No 10/2011
- U.S. FDA-DMF
Consulte regulamentações para obter maiores detalhes.
|
AFFINITY™ PF 1146G | América do Norte |
Para uso como camada selante em filmes multicamada
- Para frutas e verduras frescos, alimentos secos e outras aplicações de VFFS (Vertical Form-Fill-Seal) de alta velocidade.
- Atende à regulamentação U.S. FDA 21 CFR 177.1520 (c) 3.2a
- EU, No 10/2011
- Consulte as regulamentações para obter mais detalhes.
O Plastômero Poliolefínico (POP) AFFINITY* PF 1146 é produzido com a Tecnologia INSITE*. É destinado a aplicações de empacotamento de alta velocidade que exigem baixa temperatura inicial de selagem e boa maquinabilidade (coeficiente de atrito baixo e consistente e baixa força de bloqueio). Esta resina é projetada para oferecer um COF de < 0,2 para uma camada selante de ~1.0 mil em filme coextrusado, e para rodar rapidamente e sem problemas na maioria dos equipamentos de extrusão, inclusive matrizes de filmes soprados equipadas com estreitas aberturas da matriz.
|
AFFINITY™ PF 1146Q | América do Norte |
AFFINITY* PF 1146Q Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film, and to run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps.
- For use as a sealant layer in multilayer films
- For fresh-cut produce, dry foods and other high speed VFFS (Vertical Form-Fill-Seal) applications
Complies with:
- U.S. FDA FCN 424
- EU, No 10/2011
- HPFB (Canada), No Objection
Consult the regulations for complete details.
|
AFFINITY™ PF 1162G | América do Norte |
Para embalagem de alimentos
- Excelente flexibilidade de selagem e resistência
Atende à:
- U.S. FDA FCN 424
Consulte as regulamentações para obter mais detalhes.
|
AFFINITY™ PF 1766 | América do Norte |
AFFINITY™ PF 1766 Polyolefin Elastomer is an ethylene based Plastomer that offers superior impact properties for more demanding stretch hood film applications.
Main Characteristics:
- Pellet form
- Excellent processability
Applications:
- Extrusion applications
|
AFFINITY™ PF 1788 | América do Norte |
AFFINITY™ PF 1788 Polyolefin Plastomer (POP) is an ethylene-based plastomer, offers excellent processing in extrusion applications with enhanced elasticity performance targeting for TPE glove application.
Main Characteristics
- Pellet form
- Excellent processability
- Excellent elasticity
Applications:
- TPE glove
Consult the regulations for complete details.
|
AFFINITY™ PF 7266 | Ásia/Pacífico |
AFFINITY* PF 7266 Polyolefin Plastomer is an ethylene based plastomer, offers excellent processing and performance in extrusion applications targeting for CPP film modification application.
Main Characteristics:
- Pellet form
- Excellent processability
Applications:
- Extrusion applications
|
AFFINITY™ PL 1280G | América do Norte |
AFFINITY™ PL 1280G é um Plastômero Poliolefínico (POP) produzido com a Tecnologia INSITE™ da Dow Plastics. É destinado especificamente ao uso como camada selante em estruturas flexíveis para a embalagem de carnes e queijo, alimentos secos e bens de consumo. Devido à sua excelente selabilidade a baixas temperaturas, ótima resistência de termoselagem (hot tack), é particularmente adequado para máquinas de envase form-fill-seal de alta velocidade.
Aplicações:
Filme Moldado
Atende à:
- Canadian HPFB No Objection
- EU, No 10/2011
- U.S. FDA FCN 424
Consulte as regulamentações para obter os detalhes completos.
|
AFFINITY™ PL 1840G | América do Norte |
AFFINITY* PL 1840G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to provide blown film with low temperature sealability, good puncture resistance, optics and organoleptic properties. It also has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion.
- Outstanding low temperature sealability and toughness
- Suitable as a sealant in liquid & dry food pouch applications
Applications:
- Blown Film
Complies with:
- Canadian HPFP No Objection
- EU, No 10/2011
- U.S. FDA FCN 424
- U.S. FDA-DMF
Consult the regulations for complete details.
|
AFFINITY™ PL 1845G | Ásia/Pacífico |
AFFINITY™ PL 1845G é um Plastômero Poliolefínico (POP) produzido com a Tecnologia INSITE™ da Dow Plastics. Ele foi projetado especificamente para um uso como camada selante em estruturas flexíveis preparadas através do processo de moldagem. Sua baixa temperatura inicial de selagem, suas destacadas propriedades ópticas, e sua capacidade de coextrusão com polímeros de polipropileno fazem do Plastômero Poliolefínico AFFINITY PL 1845G a resina ideal para uso como camada superficial selante de baixa temperatura em estruturas de filmes de polipropileno de orientação biaxial (BOPP) moldados e coextrudados.
O Plastômero Poliolefínico AFFINITY PL 1845G não contém agentes deslizantes e antibloqueio. Para uma otimização do desempenho da aplicação, recomendamos adicionar masterbatches deslizantes e antibloqueio a partir de plastômeros poliolefínicos.
Atende à:
- Canadian HPFB No Objection
- EU, No 10/2011
- U.S. FDA FCN 424
Consulte as regulamentações para obter os detalhes completos.
|
AFFINITY™ PL 1850G | América do Norte |
AFFINITY™ PL 1850G Polyolefin Plastomer (POP) é produzido via Tecnologia INSITE™. É uma resina projetada para, em filmes soprados (blown) e filmes planos (cast), prover ótimo desempenho de selagem em baixa temperatura, excelente ótica e boa resistência a abuso. Ótimo produto para camada de selagem em estruturas de filmes multicamadas para embalagens de produtos secos e líquidos.
- Camada de selagem de alto desempenho em embalagens flexíveis
- Ótica excelente, baixa temperatura de início de selagem e resistência ao abuso
Atende a:
- U.S. FDA FCN 424
- Canadian HPFB sem objeções
- EU, No 10/2011
Consulte regulamentações para obter maiores detalhes
|
AFFINITY™ PL 1880G R | América do Norte |
AFFINITY* PL 1880G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package.
- Low seal initiation temperature
- Excellent hot tack strength
- High performance sealant layer in flexible packaging
Complies with:
- U.S. FDA FCN 424
- U.S. FDA-DMF
- U.S. USP 23
- HPFB No Objection (with limitations)
- EU, No 10/2011
- Japan Hygienic Olefin and Styrene Plastics Association
- ISCC Plus certification for renewable-based plastics
Consult the regulations for complete details.
|
AFFINITY™ PL 1880G REN | América do Norte |
AFFINITY™ PL 1880G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package.
- Low seal initiation temperature
- Excellent hot tack strength
- High performance sealant layer in flexible packaging
Complies with:
- U.S. FDA FCN 424
- U.S. FDA-DMF
- U.S. USP 23
- HPFB No Objection (with limitations)
- EU, No 10/2011
- Japan Hygienic Olefin and Styrene Plastics Association
- ISCC Plus certification for bio-circular plastics
Consult the regulations for complete details.
|
AFFINITY™ PL 1880G | América do Norte |
O Plastômero Poliolefínico (POP) AFFINITY* PL 1880G é produzido com a Tecnologia INSITE*. É uma resina de etileno alfa-olefina destinada ao uso em uma variedade de aplicações exigentes de embalagens inclusive envase form-fill-seal de alta velocidade. Esta resina oferece excelente resistência à termoselagem (hot tack) e baixa temperatura inicial de selagem, mesmo com contaminação na embalagem.
Baixa temperatura inicial de selagem
- Excelente resistência de termoselagem (hot tack)
- Camada de selante de alto desempenho em embalagens flexíveis
Atende à:
- U.S. FDA FCN 424
- U.S. FDA-DMF
- U.S. USP 23
- HPFB CANADENSE SEM OBJEÇÕES (COM LIMITAÇÕES)
- EU, No 10/2011
- Japan Hygienic Olefin and Styrene Plastics Association
Consulte as regulamentações para obter mais detalhes.
|
AFFINITY™ PL 1881G R | América do Norte |
AFFINITY* PL 1881G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products.
- Excellent ultimate hot tack strength
- Low temperature sealability
- Ability to seal through contamination
- Outstanding optics
Complies with:
- U.S. FDA FCN 424
- Canadian HPFB No Objection (with limitations)
- EU, No 10/2011
- ISCC Plus certification for renewable-based plastics
Consult the regulations for complete details.
|
AFFINITY™ PL 1881G REN | América do Norte |
AFFINITY™ PL 1881G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products.
- Excellent ultimate hot tack strength
- Low temperature sealability
- Ability to seal through contamination
- Outstanding optics
Complies with:
- U.S. FDA FCN 424
- Canadian HPFB No Objection (with limitations)
- EU, No 10/2011
- ISCC Plus certification for bio-circular plastics
Consult the regulations for complete details.
|
AFFINITY™ PL 1881G | América do Norte |
AFFINITY™ PL 1881G Polyolefin Plastomer (POP) é produzido via Tecnologia INSITE™. Foi projetada como uma resina de selagem para uma ampla gama de aplicações, incluindo processos de form-fill-seal (FFS) de alta velocidade, oferecendo as seguintes características:
- Resina aditivada, proporcionando baixo coeficiente de atrito
- Baixa temperatura de início de selagem e boa força de selagem a quente
- Capacidade de selagem sobre contaminação
- Excelentes propriedades ópticas
- Redução da tendência de bloqueio do filme, permitindo alta produtividade do filme soprado
Atende a:
- U.S. FDA FCN 424
- (EU) No 10/2011
Consulte regulamentações para obter maiores detalhes.
|
AFFINITY™ PL 1888G | América do Norte |
O Plastômero Poliolefínico AFFINITY* PL 1888G para filmes de embalagens é usado em aplicações de empacotamento de alta velocidade que exigem baixa temperatura inicial de selagem e boa maquinabilidade (coeficiente de atrito baixo e consistente e baixa força de bloqueio). Esta resina é projetada para oferecer um COF de < 0,2 para uma camada selante de ~1.0 mil em filme coextrudado, e para rodar rapidamente e sem problemas na maioria dos equipamentos de extrusão, inclusive matrizes de filmes soprados equipadas com estreitas aberturas da matriz.
Para uso em filmes monocamada e como camada selante em filmes multicamada
- Para frutas e verduras frescos, carnes, queijos e outras aplicações de empacotamento de alta velocidade que exigem boa maquinabilidade.
- Rápido processamento em aberturas de matriz estreitas
Atende às:
- U.S. FDA FCN 424
- Europe EU-Directive 2002/72/EC
Consulte as regulamentações para obter mais detalhes.
|
AFFINITY™ PT 1450G1 | América do Norte |
- Monolayer and coextrusion coating for packaging applications
- Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant)
- Coextruded with acid copolymer as a cost effective foil or PET sealant
- Complies with U.S. FDA
- Consult the regulations for complete details. (See NOTES)
AFFINITY™ PT 1450G1 Polyolefin Plastomer is produced via INSITE™ Technology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to (OPP) and good taste and odor performance.
Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.
|
AFFINITY™ PT 1450G1P | Ásia/Pacífico |
- Monolayer and coextrusion coating for packaging applications
- Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant)
- Coextruded with acid copolymer as a cost effective foil or PET sealant
- Complies with U.S. FDA
- Consult the regulations for complete details. (See notes)
AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance.
Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.
|
AFFINITY™ PT 1451G1 | Europa |
AFFINITY™ PT 1451G1 Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow, is specifically designed for extrusion coating and other cast extrusion processing.
AFFINITY PT 1451G1 Polyolefin Plastomer is a tough and high performance and low temperature sealant. Its ease of processability in combination with other common extrusion coating polyolefins, i.e. LDPE or acid copolymers, provides optimum sensory performance. The high clarity and adhesion to PP makes coatings of AFFINITY PT 1451G1 Polyolefin Plastomer fit for use in combination with OPP or primed PET high clarity films. Coextrusions of AFFINITY PT 1451G1 Polyolefin Plastomer with acid copolymers for adhesion to foil offer cost effective high performance sealant structures with exceptional potential for source reduction.
Note:
AFFINITY PT 1451G1 Polyolefin Plastomer should comply with FDA regulation 21 CFR 177.1520 (c) 3.2c and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest Dow office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations.
Applications:
Flexible packaging
|
AFFINITY™ SL 8110G | Europa |
AFFINITY™ SL 8110G Polyolefin Plastomer is a resin produced using INSITE™ Technology.
AFFINITY SL 8110G Polyolefin Plastomer has been designed for blown stretch films as a skin layer in coextrusion with other resins. It exhibits excellent stretchability and cling properties as well as good physical properties.
Due to its low melting point, AFFINITY SL 8110G is well suited for applications in batch inclusion bag applications.
Applications:
- Cling layer in blown stretch and preoriented films.
- Batch inclusion bags.
Complies with:
- U.S. FDA FCN 424
Consult the regulation for complete details.
|
AFFINITY™ SQ 1503UE | Ásia/Pacífico |
AFFINITY™ SQ 1503 UE é Plastômero Poliolefínico (POP) produzido com a Tecnologia INSITE™ da Dow Plastics.
O Plastômero Poliolefínico AFFINITY SQ 1503 UE foi desenvolvido especificamente para aplicações de rotomoldagem. Permite fácil extração, combinada com a flexibilidade e recuperação plástica normalmente associadas a copolímeros como EBA, EVA e PVC plastificado.
Processamento e Estabilização: O POP - inerentemente estável – recebe maior estabilização contra calor e radiação UV. O resultado é uma ampla latitude de processamento, boa retenção de cores, e longa expectativa de vida.
Disponibilidade: O Plastômero Poliolefínico AFFINITY SQ 1503 UE está disponível como pó de boa fluidez moído até 500 mícrons.
Aplicações:
- Bóias
- Pára-choques
- Equipamentos viários
Atende à:
- Europe EU-Directive 2002/72/EC
- U.S. FDA FCN 424
Consulte as regulamentações para obter os detalhes completos.
|
AFFINITY™ VP 8770G1 | Ásia/Pacífico |
AFFINITY™ VP 8770G1 Polyolefin Plastomer is a Polyolefin Plastomer (POP) produced using INSITE™ Technology.
AFFINITY VP 8770G1 Polyolefin Plastomer has exceptionally high clarity and flexibility. It has been designed for calendering applications but is also suitable for thicker and profiles extrusion.
The compatibility with other polyolefins and fillers is excellent.
Applications:
- Calendered or pressed flooring with moderate filler levels.
- Calendered film and sheet.
- Profile extrusion
Complies with:
- EU, No 10/2011
- U.S. FDA FCN 424
Consult the regulations for complete details.
|
COHERE™ 8102 | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8102 is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties.
|
COHERE™ 8102L | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8102L is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties. It contains slip and antiblock additives.
|
COHERE™ 8170D | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8170D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.
|
COHERE™ 8185 | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8185 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in high performance film applications with outstanding gel control, and an excellent combination of toughness, hot tack, sealing and optical properties.
|
COHERE™ 8380 | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8380 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.
|
COHERE™ 8402 | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8402 grade is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well high performance LLDPE cast film and deliver outstanding toughness optics. SABIC® COHERE™ 8402 provides excellent performance as cling layer in stretch wrap film.
|
COHERE™ 8570D | África & Oriente Médio |
COHERE™ Metallocene Polyolefin Plastomer (POP) 8570D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.
|