Polypropylene (PP): TPO
Produto | Disponibilidade | Descrição do produto |
---|---|---|
4KFLEX® 3901320 | Europa |
4KFLEX® Polypropylene, Compounded TPO resin
|
Advanced Composites ADX-5007 | América do Norte | |
Advanced Composites ADX-5016 | América do Norte | |
Advanced Composites ADX-5017 | América do Norte | |
Advanced Composites ADX-5023 | América do Norte |
High Flow, High Stiffness Interior TPO Suitable for Seamless Airbag Applications
|
Advanced Composites ATX832D | América do Norte | |
Advanced Composites ATX832N | América do Norte | |
Advanced Composites ATX889 | América do Norte | |
Advanced Composites ATX-969 | América do Norte |
High Performance, Scratch Resistant TPO for Seamless Airbag Applications Approved to Chrysler MS-DC265, Type D Specification
|
ALLEN® T3050LG | América do Norte |
ALLEN® T3050LG is a general purpose TPO that has high impact properties and a good cost to performance ratio to other materials like steel, FRP, aluminum, and other thermoplastics.
ALLEN® T3050LG has beed tested under laboratory conditions and has achieved a UL94 HB rating at 0.060 in (1.52mm) and above and meets the requirements of Federal Motor Vehicle Safety Standard No. 302 (FMVSS 302).
Suggested Applications
- Vehicle Interiors
- Industrial Housings
- Heavy Equipment parts
- Agriculture Equipment parts
- Antenna covers
- Exterior RV components
Features
- UV and non UV resistant products available
- Excellent low temperature impact strength
- Edge trim easily used into future orders
- Excellent chemical resistance
- High heat resistance
- Low gloss finish only
|
AURAPENE PPTF20BK | Europa |
PPTF20BK is a general purpose 20% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.
|
AURAPENE PPTF30BK | Europa |
PPTF300BK is a general purpose 30% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.
|
AURAPENE PPTF40 Black | Europa |
PPTF40BK is a general purpose 40% talc filled polypropylene compound with good UV performance, manufactured from recycled polymer.
|
AURAPENE PPUFBK LMF | Europa |
PPUFBK is a general purpose polypropylene compound manufactured from recycled polymer.
|
AURAPENE PPUFBK | Europa |
PPUFBK is a general purpose polypropylene compound manufactured from recycled polymer.
|
AURAPENE PPUFBK35 | Europa |
PPUFBK is a general purpose polypropylene compound with good impact performance and manufactured from recycled polymer.
|
AURAPENE PPUFBKIMP | Europa |
PPUFBK is a general purpose polypropylene compound with good impact performance and manufactured from recycled polymer.
|
AuroraFlex™ 19011 | África & Oriente Médio |
PP based, extrusion TPO, Zero Halogen compound.
Note: Additional custom color matching is available upon request.
|
AuroraFlex™ 20020-87A | África & Oriente Médio |
A TPO Elastomer designed for general purpose applications. RoHS Compliant material with excellent low temperature properties.
|
AuroraFlex™ 20111618 | África & Oriente Médio |
AuroraFlex 20111618 is a thermoplastic elastomer that has been developed for applications that require silk matte surface finish.
Product is supplied as ready to use pellets.
|
AuroraFlex™ 9410FRV0 | África & Oriente Médio |
UL 94 V-0, low bloom, flame retardant polypropylene compound designed with halogen-based technology. AuroraFlex 9410FRV0 exhibits a balance of high flexural modulus and good impact. It is designed for extrusion and molding applications.
|
AuroraFlex™ GTPO5041-2 | África & Oriente Médio |
A TPO/TPR based alloy suitable for extrusion applications. GTPO5041-2 may be used as a replacement for PVC compounds.
Note: Additional custom color matching is available upon request.
|
AuroraGuard™ GTPO5000-SN4 | África & Oriente Médio |
A UL 94 V 0 rated, Acid Resistant, Polypropylene based compound, the 5000SN series are specially engineered, low bloom, flame retardant, designed with halogen based technology.
5000SN series of compounds exhibit a balance of high flexural modulus and good impact. They are designed for extrusion and molding applications.
|
AuroraGuard™ GTPO8102BA-H | África & Oriente Médio |
High flow flame retardant TPO compound for insulation and jacketing designed for ribbon cable applications. The flame retardant package incorporates non PDBPO, PBB, PBDE flame
retardants, which is RoHS and WEEE compliant. The GTPO8102BA H series of products is formulated to meet UL VW 1 testing as well as the CSA test C22 2 No. 0.6 flame test.
Note: Additional custom color matching is available upon request.
|
AuroraGuard™ GTPO8102E-OF | África & Oriente Médio |
GTPO8102E-OF is Rubber modified FR, polypropylene based compound, suitable for insulation and jacketing compound and is formulated to meet CSA test C22-2 No. 0.6 flame test. GTPO8102E-OF is currently used in flat ribbon cable, heat trace and appliance wire applications requiring compound rated for 105°C continuous temperature service.
Note: Additional custom color matching is available upon request.
|
AuroraGuard™ GTPO8290-33 | África & Oriente Médio |
A Flexible, TPO based, Low Smoke, Zero Halogen compound, exhibiting excellent processing characteristics with superior physical and low temperature properties
|
AuroraGuard™ GTPO8290-33UV | África & Oriente Médio |
A flexible, UV Resistant, TPO based, Low Smoke, Zero Halogen compound exhibiting excellent processing characteristics with superior physical and low temperature properties
|
AuroraGuard™ GTPO8290FRCON-3 | África & Oriente Médio |
A Black conductive TPO based compound suitable for extrusion application.
Note: Additional custom color matching is available upon request.
|
AuroraGuard™ GTPO8293 | África & Oriente Médio |
A Polypropylene based, zero halogen, flame retardant, 105 °C rated compound with good processing and mechanical characteristics.
Note:Additional custom color matching is available upon request.
|
AuroraGuard™ TPO20MF2003 | África & Oriente Médio |
20% Mineral reinforced TPO with up to 100% sustainable feedstock
Formerly known as Evolve TPO20MF2003
|
AuroraTec™ 15TF1502 | África & Oriente Médio |
TPO
Formerly known as DualPoly 15TF1502
|
Borcycle™ EE1300SY | Europa |
Description
Borcycle™ EE1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
Borcycle EE1300SY has been developed especially for the car industry to be used in automotive interior parts.
- Door panels and pockets
- Pillar trims
- Tailgate claddings
- Interior trims
Special Features
- High scratch resistance
- Good surface aesthetics
- Low volatiles
- Recycled content
|
Borcycle™ GD3600SY | Europa |
Description
Borcycle™ GD3600SY is a 30% chemically coupled glass fibre reinforced polypropylene compound. This material contains 68% post-consumer recycled polymer and is intended for injection moulding. The product is available in standard black 9502.
Applications
Borcycle GD3600SY has been developed especially for the automotive industry.
Special Features
- Good flowability
- Good impact behaviour
- Recycled content
|
Borcycle™ L1300SY | Europa |
Description
Borcycle™ L1300SY is a 15% % mineral filled polypropylene compound containing 30% post-consumer recycled polymer and is intended for injection moulding.
This material has an excellent balance between impact strength and stiffness and gives a good surface quality.
Applications
Borcycle L1300SY has been developed especially for the car industry to be used in automotive interior parts.
- Door panels and pockets
- Pillar trims
- Tailgate claddings
- Interior trims
Special Features
- High scratch resistance
- Good surface aesthetics
- Low volatiles
- Recycled content
|
Borcycle™ ME1490SYB | América Latina |
Description
Borcycle ME1490SYB is a 10% mineral filled polypropylene compound intended for injection moulding.
Applications
Borcycle ME1490SYB is intended for: Exterior automotive parts
Physical Properties
Values determined on standard injection moulded specimens conditioned at 23°C and 50% relative humidity after at least 96 hours storage time.
|
Borcycle™ ME2220SY | Europa |
Description
Borcycle ME2220SY is a 20% mineral filled polypropylene compound intended for injection moulding. It contains 25% post-consumer recycled polymer. This material has been specifically developed for the automotive industry.
Applications
Borcycle ME2220SY has been developed especially for the car industry to be used in automotive parts.
|
Borealis PP FSC65T30 | África & Oriente Médio |
FSC65T30 is a 30% mineral filled polypropylene compound intended for injection moulding.
Applications
FSC65T30 has been developed especially for the car industry to be used in automotive interior parts.
- Dashboard carriers
- Air ducts
- Other automotive interior parts
|
Borealis PP MD494WG | África & Oriente Médio |
MD494WG is a 40% mineral filled polypropylene compound intended for injection moulding.
This material has excellent balanced mechanical properties and a medium melt flow rate.
|
Borealis PP MG160AI | África & Oriente Médio |
MG160AI is a 10% mineral filled high crystallinity polypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness.
Applications
MG160AI has been developed especially for the car industry to be used in automotive interior parts.
- Automotive interior applications
- Pillar trims
Special Features
- Good flowability
- Outstanding scratch resistance
|
Borealis PP ZC011 | África & Oriente Médio |
ZC011 is a Mineral filled polypropylene compound intended for extrusion moulding.
The product is 30% Mineral filled.
|