AGILITY™ 1001 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. Main Characteristics: - Faster processing LDPE resin - Designed for higher output rates in blends with LLDPE resins at 10-20% loading - Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1002 Performance LDPE is a high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. This resin includes 2,000 ppm of anti-block to minimize blocking issues. Main Characteristics: - Faster processing LDPE resin - Designed for higher output rates in blends with LLDPE resins at 10-20% loading - - Optimized molecular structure gives improved optics in blends with LLDPE resins Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB No Objection Consult the regulations for complete details

AGILITY™ 1021 Performance LDPE é uma resina de polietileno projetada para aplicação em linhas de extrusão de filme soprado (blown) de alta produtividade, para uso em misturas ricas em LLDPE, mantendo excelentes propriedades óticas. Características principais: - Resina LDPE para alta velocidade de processamento - Projetado para elevada produtividade em misturas com resinas LLDPE com conteúdo de 20-30% - A estrutura molecular otimizada oferece propriedades óticas aprimoradas em misturas com resinas LLDPE Atende à: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 - Canadian HPFB sem objeções Consulte regulamentações para obter maiores detalhes.

AGILITY™ 1022 Performance LDPE é uma resina de polietileno projetada para aplicação em linhas de extrusão de filme soprado (blown) de alta produtividade, para uso em misturas ricas em LLDPE, mantendo excelentes propriedades óticas. Características principais: - Resina LDPE para alta velocidade de processamento - Projetado para elevada produtividade em misturas com resinas LLDPE com conteúdo de 20-30% - A estrutura molecular otimizada oferece propriedades óticas aprimoradas em misturas com resinas LLDPE Atende à: - U.S.FDA 21 CFR 177.1520 (c) 3.2a - Canadian HPFB sem objeções Consulte regulamentações para obter maiores detalhes.

AGILITY™ 1023 Performance LDPE is used in clarity packaging with good stiffness neat and in blends with LLDPE for industrial and food packaging applications. Main Characteristics: - High optics for sparkling packages - Good stiffness - Excellent processability Complies with: - EU No 10/2011 - U.S.FDA 21 CFR 177.1520 (c) 2.2 Consult the regulations for complete details

AGILITY™ 1200 é uma resina de polietileno de baixa densidade projetada para fornecer excelente estabilidade do balão, possibilitando alcançar máxima produtividade na extrusão de filme soprado, oferecendo também excelente encolhimento.

AGILITY™ 1200 é uma resina de polietileno de baixa densidade produzida em reator de alta pressão projetada especificamente para alta processabilidade e boas óticas quando utilizada pura ou em misturas com resinas LLDPE para filmes planos ou soprados. Atende a: - U.S. FDA 21 CFR 177.1520(c )2.2 - EU, No 10/2011 - Canadian HPFB sem objeções Consulte regulamentações para obter maiores detalhes.

AGILITY™ 2000 Performance LDPE is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides high stiffness and tear resistance with exceptional bubble stability, high levels of shrink, very good toughness and optical properties. Main Characteristics: - High output rates - Very high stiffness combined with good toughness - for potential downgauging - Very high tear resistance - High puncture resistance - Very high shrink

AGILITY™ 1200 Performance LDPE é uma resina produzida em reator de alta pressão, que oferece excelente transparência combinada com alta tensão de encolhimento e elevada resistência. Características principais: - Excelente LDPE para embalagem termo-encolhível - Excelente combinação de força de encolhimento e propriedades óticas - Tenacidade para aplicações críticas Atende à: - U.S. FDA 21 CFR 177.1520(c)2.2 Consulte regulamentações para obter maiores detalhes.

AGILITY™ AT 1604 Performance LDPE can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230°C. AGILITY™ AT 1604 Performance LDPE has been designed to have excellent bubble stability and is therefore particularly suited to large wide width blown film application such as agricultural films Applications: - Heavy duty industrial film - Agricultural Film - Shrink Films AGILITY™ AT 1604 Performance LDPE should comply with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details

AGILITY™ EC 7000 é um polietileno de baixa densidade desenvolvido para revestimento por extrusão ("extrusion coating ") de alta velocidade. Características principais: - Extrusão em alta e baixas temparaturas - Estabilidade no estiramento - Bom desempenho como selante Atende à: - EU No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. FDA-DMF Consulte regulamentações para obter maiores detalhes.

AGILITY EC 7000 R Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY EC 7000 REN Performance LDPE is a next generation low density polyethylene resin for high speed extrusion coating Main Characteristics: - Recommended for extrusion at high and low temperatures - Robustness in melt drawing - Performance as sealant polymer Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. DFA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7030 Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 Consult the regulations for complete details.

AGILITY™ EC 7030 R Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 R Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

AGILITY™ EC 7030 REN Performance LDPE is a Low Density Polyethylene Resin designed for single layer and sealant application in extrusion coating. It is designed to run at maximum production line speed of 300 m/min, showing good neck-in results and draw ability to guarantee coating weights as low as 10 g/m2. At these conditions the processing performance of AGILITY™ EC 7030 REN Performance LDPE based on Dow's novel patented advanced tubular technology is similar to a traditional extrusion coating resin produced with an autoclave process and within the MFI range of 4 to 8 g/10min. Complies with: - Europe Commission Regulation (EU) No 10/2011 - U.S. FDA 21 CFR 177.1520 ( c )2.1 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

AGILITY™ EC 7220 Performance LDPE is a high melt strength LDPE, designed for the foam industry. This resin enables the stable production of very low density foams. It can be used both in crosslinked and non-crosslinked products. Complies with: - Europe Commission Regulation (EU) No 10/2011. - U.S. FDA 21 CFR 177.1520(c)2.1. Consult the regulations for complete details.

APPEEL™ 1181 is a modified ethylene vinyl acetate resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals over a broad temperature range to a number of container materials including PP, PET, PS and aluminum. It will also provide destruct seals to PVC and PE. APPEEL™ 1181 is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - High clarity and low seal initiation temperature. Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent

APPEEL™ 11D542 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide interfacial peel seals film to film, and occasionally for peel seal from HDPE, LLDPE, or low %EVA films. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Characteristics / Benefits - Cohesive type peel seal. Applications - Interfacial Peel Seal for pouches, Peelable Lidding film to other polyolefin substrates,

APPEEL™ 11D554 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide peelable seals to polypropylene, polystyrene and polystyrene foam and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant

APPEEL™ 2044 is a blown or cast film resin designed to be a sealing layer for lidding applications. It provides a peelable seal over a broad temperature range to a number of container materials including ABS, CPET, HDPE, PETG, PP, PS, and APET. It will provide stronger seals to HIPS, PVC, and HDPE. APPEEL™ 2044 is a modified ethylene vinyl acetate polymer available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Characteristics / Benefits - Contains amide slip agent - Contains antiblock agent

APPEEL™ 52004 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Good heat sealability and easy peelability to foamed PS. - Excellent direct foil adhesion without the use of primers. - APPEEL™ 52004 conforms to Code #20 of the Ministry of Health and Welfare Japan. Typical structures for this lidding would be: Paper/PE/Foil/APPEEL™ 52004 APPEEL™ 52004 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup. APPEEL™ 52004 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 52009 is a modified ethylene acid terpolymer resin designed to function as a sealing layer for lidding applications, most commonly sealing to foamed polystyrene. It is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Good heat sealability and easy peelability to foamed PS. - Excellent direct foil adhesion without the use of primers. - APPEEL™ 52009 conforms to Code #20 of the Ministry of Health and Welfare Japan. Typical structures for this lidding would be: Paper/PE/Foil/APPEEL™ 52009 APPEEL™ 52009 is used as a heat seal layer in lidding material for foamed PS, especially used in the packaging of instant noodle cup. APPEEL™ 52009 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53007 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53007 offers low temperature heat seals with adequate seal strength at 90°C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53007 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53007 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53007 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53007 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53007 PET/PE/ APPEEL™ 53007 Over lacquer/Print/Foil/PE/ APPEEL™ 53007 Paper/PE/Foil/PE/ APPEEL™ 53007 APPEEL™ 53007 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53008 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53008 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53008 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53008 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53008 endures boiling process, whose conditions are 85C / 30min. - APPEEL™ 53008 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53008 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53008 PET/PE/ APPEEL™ 53008 Over lacquer/Print/Foil/PE/ APPEEL™ 53008 Paper/PE/Foil/PE/ APPEEL™ 53008 APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53009 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53009 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53009 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53009 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53009 endures boiling process, whose conditions are 85C / 30min. - APPEEL™ 53009 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53009 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53009 PET/PE/ APPEEL™ 53009 Over lacquer/Print/Foil/PE/ APPEEL™ 53009 Paper/PE/Foil/PE/ APPEEL™ 53009 APPEEL™ 53008 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53010 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53010 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53010 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53010 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53010 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53010 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53010 PET/PE/ APPEEL™ 53010 Over lacquer/Print/Foil/PE/ APPEEL™ 53010 Paper/PE/Foil/PE/ APPEEL™ 53010 APPEEL™ 53010 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53021 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Applications - Low temperature heat seal. APPEEL™ 53021 offers low temperature heat seals with adequate seal strength at 90oC. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53021 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53021 allows a peelable seal from most plastic materials excluding PE. - High transparency. - APPEEL™ 53021 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53021 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53021 PET/PE/ APPEEL™ 53021 Over lacquer/Print/Foil/PE/ APPEEL™ 53021 Paper/PE/Foil/PE/ APPEEL™ 53021 APPEEL™ 53021 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53070 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - *** Contains amides for slip / chill roll release, but more than in APPEEL™ 53071. Applications Contains amides for slip / chill roll release, but more than in APPEEL™ 53071. - Low temperature heat seal. APPEEL™ 53070 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53070 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53070 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53070 endures boiling process, whose conditions are 90C / 30min. - APPEEL™ 53070 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53070 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53070 PET/PE/ APPEEL™ 53070 Over lacquer/Print/Foil/PE/ APPEEL™ 53070 Paper/PE/Foil/PE/ APPEEL™ 53070 APPEEL™ 53070 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

APPEEL™ 53071 is a modified ethylene vinyl acetate copolymer resin designed to function as a sealing layer for lidding applications. It is most often suggested to provide strong peelable seals to polypropylene, and moderate seals to polystyrene, polyester, PVC and is available in pellet form for use in conventional extrusion or coextrusion equipment designed to process polyethylene resins. Uses - Lidding Sealant Features - *** Contains amides for slip / chill roll release, but less than in APPEEL™ 53070. Applications Contains amides for slip / chill roll release, but less than in APPEEL™ 53070. - Low temperature heat seal. APPEEL™ 53071 offers low temperature heat seals with adequate seal strength at 90C. - Heat sealability to various materials including PE, PP, PS, and Rigid PVC. APPEEL™ 53071 can also be sealed to paper, paperboard, woven fabrics, non-woven fabrics, wood and photographic papers. - APPEEL™ 53071 allows a peelable seal from most plastic materials excluding PE. - High transparency. - Boiling resistance. APPEEL™ 53071 endures boiling process, whose conditions are 90C / 30min. - APPEEL™ 53071 conforms to Code #20 of the Ministry of Health and Welfare Japan. - APPEEL™ 53071 is used as a heat seal layer in lidding material for injection molded and vacuum molded plastic containers, especially HIPS and PS used in the packaging of yogurts, jams, butter and other food items. Typical structures for this lidding would be: OPP/PE/ APPEEL™ 53071 PET/PE/ APPEEL™ 53071 Over lacquer/Print/Foil/PE/ APPEEL™ 53071 Paper/PE/Foil/PE/ APPEEL™ 53071 APPEEL™ 53071 can also be used as a sealant in general flexible packaging. It provides low temperature seals for snacks and confectionery.

A Resina de Grau Fibra ASPUN 6834 é um produto adequado ao uso em equipamentos de produção de spunbond e fibras cortadas (staple fiber) (Configuração Mono e Bi). Os usos comerciais são em áreas para não tecidos oferecendo excelente suavidade e capacidade de dobra e recobrimento (drapability), adesão térmica direta de tecido com tecido ou tecido com filme de polietileno. Em Fibras Cortadas (staple fibers) é usado como fibras de baixa adesão como bainha bicomponente. Nota: A Resina de Grau Fibra ASPUN 6834 deve atender à regulamentação do FDA 177.1520 e à maioria das regulamentações européias de contato com alimentos quando utilizada sem modificações e processada conforme as boas práticas de fabricação para aplicações de contato com alimentos. Entre em contato com o escritório da Dow mais próximo a respeito dos textos de conformidade com os requisitos para contato com alimentos. O comprador é responsável por determinar se o uso atende a todas as regulamentações pertinentes. Aplicações: - Utilidades domésticas - Têxteis e Fibras - Saúde e Higiene - Interiores Automotivos - Embalagens Médicas

- Projetada para o processamento de filamentos e fibras ligantes (bonding fibers) - Atende às regulamentações U.S. FDA 21 CFR 177.1520 (c) 3.2a. - Consulte as regulamentações para obter mais detalhes. A Resina de Grau Fibra ASPUN™ 6835A é um polietileno linear de baixa densidade (LLDPE). Um dos processos típicos é a fabricação de fibras cortadas (staple fiber).

ASPUN* 6840A Fiber Grade Resin is a linear low density polyethylene (LLDPE). A typical process is spunbond non-woven or staple fiber production - Is designed for processing into nonwoven fabrics and nonwoven fibers - Soft fabric with excellent drape - Low melting point for bonding Complies with: - US. FDA 21 CFR 177.1520(c)3.1A Consult the regulation for complete details.

Aspun™ 6850 Fiber Grade Resin is a linear low density polyethylene (LLDPE). Typical processes include spun-bond nonwoven and staple fiber production. Characteristics: Designed for processing into nonwoven fabrics and bonding fibers. Soft fabric with excellent drape. Low melting point for bonding. It complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

ASPUN™ 6850A Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

ASPUN™ AT 2135 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment. Commercial uses are in the non-woven areas offering excellent softness and drapability, low bonding temperature, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 Consult the regulations for complete details. Notes: The composition of this product complies with the requirements for use in contact with food of the EU, No 10/2011. Contact a Dow Sales Office to obtain a detailed food contact compliance letter for this product. Such a letter covers the food contact status of this product in the various European Countries and in addition gives information about the imposed migration requirements.

Para aplicações de embalagem de alimentos - Excelente resistência ao manuseio, ótimas propriedades ótocas e de selagem e boa processabilidade Atende à: - U.S. FDA FCN 424 - Europe EU-Directive 2002/72/EC - U.S. FDA DMF Consulte as regulamentações para obter os detalhes completos.

Para aplicações em embalagens - Oferece alta resistência à perfuração, excelente flexibilidade e resistência ao abuso - Excelentes propriedades de selagem - Atende aos requisitos do HPFB CANADENSE SEM OBJEÇÕES - Quando utilizado sem modificações para aplicações de contato com alimentos, o ATTANE™ 4203, Polietileno de Ultrabaixa Densidade/Copolímero de Octeno atende à Lei Federal de Alimentos, Medicamentos e Cosméticos (Federal Food, Drug, and Cosmetic Act) como uma substância para contato com alimentos como resultado de uma Notificação de Pré-Comercialização para Contato com Alimentos (FCN) com data de vigência de 7 de Outubro de 2004 conforme o FCN 424. Esta notificação permite o uso deste produto como artigos ou componentes de artigos utilizados em contato com todos os tipos de alimentos conforme as Condições de Uso de A a H descritas na Tabela 2 de 21 do CFR § 176.170(c) do U.S. FDA. A composição deste produto atende aos requisitos para uso em contato com alimentos da Diretiva da União Européia 90/128/EEC. Entre em contato com um Escritório de Vendas da Dow para obter uma detalhada carta de conformidade de contato com alimentos para este produto.

ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer is a skin layer in cast film offers excellent low temperature hot tack properties combined with outstanding tear and impact strength. In stretch film applications, ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer exhibits excellent stretchability as well as good physical and cling properties. ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer can also be utilized in blown film coextrusion where it is combined with other resins having excellent bubble stability allowing ATTANE™ 4207GC Ultra Low Density Ethylene/Octene Copolymer to be used as a sealant in multilayer film structures. Applications: - Cling layer in cast stretch film. - Sealants in cast and blown films. Complies with: - EU, No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details

- Oferece sensível melhora na aderência (cling) - Apresenta alta resistência e ótimas propriedades ópticas - Atende aos requisitos do HPFB CANADENSE SEM OBJEÇÕES (COM LIMITAÇÕES) - Quando utilizado sem modificações para aplicações de contato com alimentos, o ATTANE™ 4404G , Copolímero de Octeno de Ultrabaixa Densidade atende à Lei Federal de Alimentos, Medicamentos e Cosméticos (Federal Food, Drug, and Cosmetic Act) como uma substância para contato com alimentos como resultado de uma Notificação de Pré-Comercialização para Contato com Alimentos (FCN) com data de vigência de 7 de outubro de 2004 conforme o FCN 424. Esta notificação permite o uso deste produto como artigos ou componentes de artigos utilizados em contato com todos os tipos de alimentos conforme as Condições de Uso de A a H descritas na Tabela 2 de 21 do CFR § 176.170(c) do U.S. FDA A composição deste produto atende aos requisitos para uso em contato com alimentos da Diretiva da União Européia 2002/72/EC. Entre em contato com um Escritório de Vendas da Dow para obter uma detalhada carta de conformidade de contato com alimentos para este produto.