30% Glass Reinforced, PA4T, Electro-friendly, Halogen free and free of red phosphorous ForTii® C11-F is developed for low corrosion and has good balance in flow, toughness and stiffness, enabling thin walls or complicated geometries for E&E applications. C11-F has an all color V0 rating down 0.2mm and high RTI electrical rating of 140°C at 0.75 mm and a CTI of 800V to secure thermal ageing and electrical performance.

30% Glass Reinforced, High Performance PPA, Medical grade

30% Glass Reinforced, PA4T, Good Flow, Halogen free and free of red phosphorous, Certified V-0 at 0.15mm ForTii® Eco E11 has an excellent balance in flow, toughness and stiffness with superior processing performance for injection molding.  It has improved toughness and is suitable for SMT processes. Eco E11 has a high electrical RTI rating of 150°C at 0.75 mm and has CTI 600V. Eco E11 is Eco-friendly due to its partly bio-based content. Design Challenge Life cycle assessment

35% Glass Reinforced, Laser Direct Structuring (LDS), Low Warpage ForTii® Eco LDS62B is a high ductility LDS material which enables good structural integrity in complicated geometries. It is well suited for wearable devices and smart phone antennas for consumer electronics. It has excellent dimensional stability to ensure low warpage after chemical plating. Eco LDS62B is Eco-friendly due to its partly bio-based content.

30% Glass Reinforced, PA4T, Electro-friendly, Halogen free and free of red phosphorous, Certified V-0 at 0.2mm ForTii® F11 has an excellent balance in flow, toughness and stiffness, enabling thin walls or complicated geometries for E&E applications. F11 is all-color VDE approved, has a high RTI electrical rating of 140°C at 0.75 mm and a CTI =800V rating to secure thermal ageing and electrical performance.

40% Glass Reinforced, PA4T, Electro-friendly, Halogen free and free of red phosphorous ForTii® F12 has excellent balance of stiffness and toughness, suitable for high mechanical loaded application such as power connector or EV parts. F12 has high RTI electrical rating of 140°C at 0.75 mm and shows JEDEC Level 2 performance, enabling SMT process without deformation and low risk on blistering.

30% Glass Reinforced, PA4T, Electro-friendly ForTii® JTX2 has robust mechanical performance and has good reliability in thermal ageing and mechanical shocks. JTX2 has consistent performance in injection molding processing and a low risk of blistering due to its JEDEC MLS 1 rating for specified thicknesses. JTX2 is the best candidate for HB reflow headers/connectors in (automotive) electronics.

30% Glass Reinforced, PA4T, Good Flow, Electro-friendly ForTii® K11 combines excellent mechanical properties with low warpage for miniature applications such as Audio Jack and Camera Holder.

40% Glass Reinforced, PA4T, Electro-friendly ForTii® K12 combines high mechanical strength and good flowability, ideal for designs requiring dimensional stability and impact resistance. K12 is suitable for applications such as sensor housing or camera bracket.

30% Glass Reinforced, PA4T, Halogen free and free of red phosphorous, Certified V-0 at 0.4mm, Laser Direct Structuring (LDS) ForTii® LDS51B is a truly reflow compatible and halogen-free flame retardancy grade. LDS51B has superior plating performance and is compatible with a broad range of laser settings enabling high resolution and fine line capability.

30% Glass Reinforced, PA4T, Laser Direct Structuring (LDS) ForTii® LDS85B enables mechanical function integration with high impact resistance and ductility. LDS85B has very good plating performance.

35% Glass Reinforced, PA4T, Electro-friendly, Enhanced Hydrolytic Stability, for Automotive applications ForTii® MX15HR exhibits enhanced hydrolytic stability towards aggressive coolants (water/glycol, 135°C) that are used in engine's thermal management systems. It has excellent mechanical performance and weld-line resistance.

40% Glass Reinforced, PA4T, Heat Stabilized, for Automotive applications ForTii® MX2 is a high Tg PPA that outperforms in dimensional stability at elevated temperatures due to the high heat deflection temperature (HDT). MX2 has excellent fatigue performance and good chemical resistance. Design Challenge Designing structural parts | CAE Designing structural parts | high strength and stiffness solutions

50% Glass Reinforced, PA4T, Heat Stabilized, for Automotive applications ForTii® MX3 is a high Tg PPA that outperforms in dimensional stability at elevated temperatures due to the high heat deflection temperature (HDT). MX3 has excellent fatigue performance and good chemical resistance. Design Challenge Designing structural parts | CAE Designing structural parts | high strength and stiffness solutions

50% Glass Reinforced, PA4T, Suitable for NMT, Suitable for PVD ForTii® NMX33 offers excellent adhesion to NMT treated metals and high mechanical performance in metal/plastics bonding. NMX33 also has a high HDT resulting in a good thermal resistance, supporting high temperature secondary processes such as high temperature PVD.

30% Glass Reinforced, PA4T, Electro-friendly, Halogen free and free of red phosphorous, Certified V-0 at 0.2mm ForTii® T11 has optimal toughness and is the best solution for (automotive) electrical components in harsh environments to minimize the risk of cracking and to provide design freedom and product reliability in terms of thermal shock ageing >1000 cycles. T11 passes JEDEC MSL 1 reflow performance (for specified thickness), reaches CTI =800V for heavy duty components, is all-color VDE approved and has electrical RTI rating of 140°C at 0,75 mm.

30% Glass Reinforced, PA4T, Electro-friendly, Halogen free and free of red phosphorous, Certified V-0 at 0.35mm ForTii® TX1 has robust mechanical & JEDEC Level 2 performance, enabling SMT process without deformation and low risk on blistering. TX1 has stable processing behavior and is suitable for typical consumer electronics connector manufacturing such as I/O, FPC and WTB connectors.

30% Glass Reinforced, PA4T, Food Contact Quality, Drinking Water Grade ForTii® WX11-FC has excellent hydrolysis resistance, processability and surface quality and is ideal for complex and thin walled food and water contact applications. For detailed statements and information regarding food contact and water contact approvals please contact your Envalior representative.

40% Glass Reinforced, PA4T, Food Contact Quality, Drinking Water Grade ForTii® WX12-FC has excellent hydrolysis resistance, processability and surface quality and is ideal for complex and thin walled food and water contact applications. For detailed statements and information regarding food contact and water contact approvals please contact your Envalior representative.