Acetal by ADVANCED POLYMERS
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Enform® 025 | América Latina |
Enform® 025 is high-viscosity grade and suitable for extrusion and injection molding
|
Enform® 090 GF10 | América Latina |
Enform® 090 GF10 is reinforced with 10% glass fiber. Offers stiffness and heat distortion temperature with lower mold shrinkage, minimum thermal expansion and good moldability.
|
Enform® 090 GF25 | América Latina |
Enform® 090 GF25 is reinforced with 25% glass fiber. Offers stiffness and heat distortion temperature with lower mold shrinkage, minimum thermal expansion and good moldability
|
Enform® 090 LWF3 | América Latina |
Enform® 090 LWF3 is an acetal copolymer with a nominal 9 melt flow rate base polymer and 3% of polytetrafluoroethylene filler (PTFE). It is designed for use in wear applications against plastic, metal, glass, or ceramic mating surfaces where silicone lubricants can not be tolerated.
|
Enform® 090 MD2 | América Latina |
Enform® 090 MD2 is an acetal copolymer with a nominal 9 melt flow rate base polymer modified with molybdenum disulphide. It is designed for applications in which high surface pressure loadings and very low sliding speeds occur at the same time. These grades reduce the stick-slip effect, which can generate considerable noise.
|
Enform® 090 | América Latina |
Enform® 090 is POM copolymer with medium viscosity, general purpose injection moldable grade
|
Enform® 270 | América Latina |
Enform® 270 is na easy flow grade for the multi-cavity.
|
Enform® 500C | América Latina |
Enform® 500C is a genetal purpose medium viscosity acetal homopolymer for injection molding. It has improved processings thermal stability, a good combination of mechanical properties, and low VOC emissions.
|
Enform® 500H | América Latina |
Enform® 500H have good cheminical resistance to solvents, fuel and strong alkalis, as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation.
|
Enform® ST90 Plus | América Latina |
Enform® ST90 Plus is acetal copolymer highly impact modified grade for demanding applications. Provides a significant improvement in impact strength adn flexibility over standard impact modified grades.
|
Enform® ST90 | América Latina |
Enform® ST90 is acetal copolymer with impact modified grade for applications requiring improved impact. Provides good impact strength while improving modulus and weld line strength over standard impact modified grades.
|