Acetal: Copolímero (POM) Acetal
Produto | Disponibilidade | Descrição do produto |
---|---|---|
Celcon® UV140LG | África & Oriente Médio |
UV resistant - automotive, low gloss surface, broad range of colors
Celcon® acetal copolymer grade UV140LG is a specialty grade of acetal copolymer formulated to provide good flow with a low gloss finish and a UV stability necessary for interior automotive applications.
|
Celcon® UV25Z | África & Oriente Médio |
UV resistant - automotive, improved toughness
Celcon® UV25Z is a nominal 2.5 melt flow rate acetal copolymer which has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposure. The material is available in precolored black or colors.
|
Celcon® UV270Z | África & Oriente Médio |
UV resistant - automotive, high flow for difficult to fill parts, broad range of colors
Celcon® UV270Z is a nominal 27 melt flow rate acetal copolymer which has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposure. Celcon® UV270Z is designed to fill small and difficult to process parts such as speaker grills and other interior automotive parts. The material is available in precolored black or colors.
|
Celcon® UV90Z ECO-B | África & Oriente Médio |
UV resistant - automotive, general purpose grade, broad range of UV90Z colors
Celcon® UV90Z is an integrally colored nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is expected. The material is formulated to prevent discoloration, fading, chalking and mechanical property changes in severe ultraviolet exposure. This product is available in many colors formulated for the interior automotive market and other applications. ECO-B: Celcon® ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.
|
Celcon® UV90Z | África & Oriente Médio |
UV resistant - automotive, general purpose grade, broad range of UV90Z colors
Celcon® UV90Z is an integrally colored nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is expected. The material is formulated to prevent discoloration, fading, chalking and mechanical property changes in severe ultraviolet exposure. This product is available in many colors formulated for the interior automotive market and other applications.
|
Celcon® WR25Z | África & Oriente Médio |
UV resistant - automotive and outdoor applications, improved toughness
Celcon® WR25Z is a 2.5 nominal melt flow rate based acetal copolymer stabilized to provide maximum ultraviolet radiation resistance in outdoor applications. Celcon® WR25Z is a lower flow product providing improved toughness. Available in black only.
|
Celcon® WR90Z | África & Oriente Médio |
UV resistant - automotive and outdoor applications, general purpose
Celcon® WR90Z is a standard nominal 9 melt flow rate based acetal copolymer stabilized to provide maximum ultraviolet radiation resistance in outdoor applications while retaining a good balance of properties. Available in black only.
|
Celstran® POM-GF25-04 AF3001 | África & Oriente Médio |
Developmental 25% long glass fiber filled acetal copolymer
Material code according to ISO 1043-1: POM Acetal copolymer reinforced with 25 weight percent long glass fibers. The fibers are chemically coupled to the POM matrix. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Application field: Functional/structural parts for automotive
|
Cheng Yu FV30BK | Ásia/Pacífico | |
Cheng Yu SW10 | Ásia/Pacífico | |
Cheng Yu SW20 | Ásia/Pacífico | |
Cheng Yu SW30 | Ásia/Pacífico | |
Clariant Acetal CA9000NAT | América do Norte | |
Clariant Acetal CP-G25 | América do Norte | |
Clariant Acetal CP-MF5 | América do Norte | |
Clariant Acetal CP-MF9 | América do Norte | |
ColorFast® POM200 Metal | África & Oriente Médio |
STAINLESS STEEL POWDER FILLED ACETAL COPOLYMER
|
ColorFast® POM2-0800 | África & Oriente Médio |
POM2-0800 is a medium viscosity injection molding grade of Acetal (POM) Copolymer with good thermal stability and high fatigue and chemical resistance. It is suitable for a wide range of applications including laser marking.
|
ColorFast® POMC-0900 | África & Oriente Médio |
POMC-0900 is a medium viscosity injection molding grade of Acetal (POM) Copolymer with good thermal stability and high fatigue and chemical resistance. It is suitable for a wide range of applications.
|
ColorRx® POM2-0800RX | África & Oriente Médio |
POM2-0800RX is a medium flow injection molding grade of Acetal (POM) Copolymer with high friction and wear resistance. It is suitable for healthcare applications.
|
ColorRx® POM2-0900RX | África & Oriente Médio |
POM2-0900RX is a standard flow injection molding grade of Acetal (POM) Copolymer with high strength and stiffness. It is suitable for healthcare applications.
|
ColorRx® POM2-0901RX | África & Oriente Médio |
POM2-0901RX is a standard flow injection molding grade of Acetal (POM) Copolymer. It is suitable for healthcare applications.
|
Comco POMC | Europa |
Application examples: Gearwheels, impellers, bearings, sliding bearings, seals, tool handles, etc.
|
CP PRYME® Acetal AC100-27 | América do Norte |
Prime 27 Melt, Acetal Copolymer, Natural
|
CP PRYME® Acetal AC100-9 | América do Norte |
Prime 9 Melt, Acetal Copolymer, Natural
|
CP PRYME® Acetal AC125 | América do Norte |
25% Glass Fiber Reinforced, Prime Acetal Copolymer
|
Delta ATL C27 | América do Norte | |
Delta ATL C27-UV | América do Norte | |
Delta ATL C9 | América do Norte | |
Delta ATL C9CL | América do Norte | |
Delta ATL C9-SG | América do Norte | |
Delta ATL C9-U6 | América do Norte | |
Delta ATL-2PT20 -UV | América do Norte | |
Delta ATL-2TFP20 | América do Norte | |
Delta ATL-2TFP40 | América do Norte | |
Delta ATL-2TFP40-CL | América do Norte | |
Delta ATR-2G40 | América do Norte | |
Delta ATR-2G50 | América do Norte | |
DENIFORM 0037 ST | África & Oriente Médio |
POM resin unfilled, impact modified for injection moulding
|
DENIFORM 0037 | África & Oriente Médio |
POM resin unfilled, impact modified for injection moulding
|