ErcrosBio ® LD 600 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LD 600 is a highly transparent material obtained through D-isomer polymerisation of lactic acid. The L-isomer content is less than 1%. RECOMMENDED APPLICATIONS: ErcrosBio ® LD 600 is a material designed to be used as an additive in combination with ErcrosBio LL grades at a proportion of 1%-5% to improve the crystallisation speed and decrease injection cycle times. In applications requiring a greater flexibility and elongation at break of the material, amounts exceeding 5% of ErcrosBio ® LD 600 will have to be added.

ErcrosBio ® LL 550 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LL 550 has a high level of fluidity that is suitable for the injection of thin-walled parts, which require good processability, high level of transparency and short injection cycle times. The material is designed to obtain parts by injection that do not require high impact properties and that require a high level of rigidity. The crystallisation speed increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LL 550 is recommended for injection moulding of thin-walled parts with high mechanical resistance. It can also be used for the injection of small parts, protection cases, supports, small containers, etc.

ErcrosBio ® LL 600 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LL 600 has a high level of fluidity, making it suitable for the injection of thin-walled parts, where good processability, high level of transparency and short injection cycle times are desired. It has been designed to obtain parts by injection that do not require high impact properties and that require a high level of rigidity. The crystallisation speed increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LL 600 is recommended for injection moulding of thin-walled parts, such as vessels, containers, etc. It can also be used for injection of small parts, protection cases, supports, small containers, etc.

ErcrosBio ® LL 650 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LL 650 is a material designed for the production of sheets using extrusion-casting, injection and injection-blowing. It is a material that can be used in a wide range of processes, although it is especially suitable for injection-blowing of thick-walled parts. Given its impact properties, it is also ideal for injection-blowing processes for the manufacturing of hollow objects. The crystallisation speed increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LL 650 is recommended for injection-blow moulding of all types of bottles and containers, such as solid food jars. ErcrosBio ® LL 650 is also recommended for thermoformed parts with low stretch ratio and with moderate mechanical requirements.

ErcrosBio ® LL 700 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LL 700 is an ideal material for producing sheets and films, and subsequent thermoforming in cast-extrusion lines. Given its low flow index and high melting strength, it can be used to obtain a wide range of thicknesses in cast-extrusion processes. RECOMMENDED APPLICATIONS: ErcrosBio ® LL 700 is recommended for producing sheets and thermoformed products, as well as films of medium to low thicknesses (up to 50 micra) obtained through cast-extrusion processes. It can also be used for producing printed films and filaments for 3D printers (1,75-3 mm).

ErcrosBio ® LL 705 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LL 705 is an ideal material for producing films and filaments for 3D printing. 3D printing results have excellent characteristics: good layer-to-layer cohesion, no distortions or warping, precise details and with very little smell. Given its low flow index, it can also be used to obtain films in a wide range of thicknesses. RECOMMENDED APPLICATIONS: ErcrosBio ® LL 705 is recommended for producing films of medium to low thicknesses (under 150 micra). It can also be used for producing filament for 3D printers (1,75-2,85 mm).

ErcrosBio ® LM 62502 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 99%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 62502 is a material designed to mould bottles, containers and other hollow objects as a substitute for PET, using the injection-blowing process. RECOMMENDED APPLICATIONS: ErcrosBio ® LM 62502 has good dimensional stability to allow proper injection of preform threads and injected parts in general that require high dimensional precision. It is suitable for the (transparent) injection-blowing process.

ErcrosBio ® LM 63101 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 95%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 63101 is a material designed for moulding parts that may be subject to compression stress. It has high speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 63101 is recommended for injection moulding of parts as a substitute for opaque PP or PS, when rigidity is required. It is used for thick-walled, small surface-area parts, such as horticultural applications (fruit/vegetable boxes), disposable household items, small containers, storage boxes, office materials, containers and vessels for food packaging. It is suitable for the (opaque) injection-blowing process.

ErcrosBio ® LM 63103 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 80%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 63103 is a material designed for moulding rigid objects obtained by injection as a substitute for opaque PP. It is suitable for injection-blowing processes. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 63103 is recommended for disposable household items, containers and thin-walled vessels, as well as for any type of medium-sized containers that may be subject to impact.

ErcrosBio ® LM 63106 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 75%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 63106 is a material designed for obtaining rigid parts by injection, when flexibility and good performance on impact are required. It provides excellent processability, as well as good mechanical properties and low post-moulding contraction. It has good barrier properties, especially to water vapour. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 63106 is recommended for injection moulding of parts as a substitute for heterophasic PP, such as disposable household items, containers and medium-walled or medium thickness trays, lids for containers, bottle caps, toys, brushes, plastic razors, toiletry boxes; as well as all types of medium-sized containers that may be subject to impact and repeated bending. It is suitable for injection-blowing processes.

ErcrosBio ® LM 72304 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 95%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 72304 is a material intended for obtaining sheets by extrusion and subsequent thermoforming when transparency is required. It provides excellent processability in both extrusion and thermoforming. RECOMMENDED APPLICATIONS: ErcrosBio ® 72304 is prepared to be processed in flat-head extruders for the production of thick sheets (> 400 µm). The material is designed for extrusion lines equipped with casting pumps to generate pressure in the head. The thermoformed pieces can be cut without causing breakages or splintering. Recommended applications, in which it can substitute PET or PS, include trays, vessels, containers, CD cases, self-sealing food containers (clam-shell), blister-type packaging attached to carton, ridged containers, disposable packaging and sales displays.

ErcrosBio ® LM 73101 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 85%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 73101 is a material intended for obtaining sheets by extrusion and subsequent thermoforming when increased thermal resistance and permeability are required. It has an opacity exceeding 90% in the whole visible spectrum. It provides excellent processability in both extrusion and thermoforming. RECOMMENDED APPLICATIONS: ErcrosBio ® 73101 is prepared to be processed in flat-head extruders for the production of sheets. The thermoformed pieces can be cut without causing breakages or splintering. Recommended applications, in which it can substitute PET or PES (even at lower thicknesses), include trays, vessels, containers, CD cases, sales displays, packaging of products for consumption and electronics, disposable lids for vessels and reusable food trays.

ErcrosBio ® LM 73501 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 90%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 73501 is a material intended for obtaining sheets by extrusion and subsequent thermoforming when high thermal resistance and low permeability are required. It has an opacity exceeding 90% in the whole visible spectrum. It provides excellent processability in both extrusion and thermoforming. RECOMMENDED APPLICATIONS: ErcrosBio ® 73501 is prepared to be processed in flat-head extruders for the production of sheets. The thermoformed pieces can be cut without causing breakages or splintering. Recommended applications, in which it can substitute PET or PS (even at lower thicknesses), include trays, vessels, containers, CD cases, packaging of products for consumption and electronics, disposable lids for vessels, reusable food trays and grooved sheets for horticultural boxes.

ErcrosBio ® LM 74301 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 90%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 74301 is a material intended for obtaining sheets by extrusion and subsequent thermoforming when a translucent appearance is required. It provides excellent processability in both extrusion and thermoforming. RECOMMENDED APPLICATIONS: ErcrosBio ® 74301 is prepared to be processed in flat-head extruders for the production of thick sheets (> 400 µm). The thermoformed pieces can be cut without causing breakages or splintering. Recommended applications, in which it can substitute PET or PS (even at lower thicknesses), include trays, vessels, containers, CD cases, sales displays, self-sealing food containers (clam-shell), blister-type packaging attached to carton, ridged containers and disposable packaging.

ErcrosBio ® LM 81003 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 85%. CHARACTERISTICS: ErcrosBio ® LM 81003 is a material designed for moulding rigid parts by injection when the requirements include good mechanical properties with a high deformation at break and good performance on impact. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 81003 is recommended for injection moulding of parts that require good mechanical properties as well as good performance on impact. It can be used for the injection of all types of parts: protection cases, supports, small containers, etc.

ErcrosBio ® LM 81005 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 70%. CHARACTERISTICS: ErcrosBio ® LM 81005 is a material designed for moulding rigid parts by injection when the requirements include good mechanical properties with a high deformation at break and good performance on impact. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 81005 is recommended for injection moulding of parts that require good mechanical properties as well as good performance on impact. It can be used for the injection of all types of parts: protection cases, supports, small containers, etc.

ErcrosBio ® LM 87002 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 55%. CHARACTERISTICS: ErcrosBio ® LM 87002 is a material specifically designed for moulding rigid parts by injection when good mechanical properties are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 87002 is recommended for injection moulding of parts that require good mechanical properties, even at high temperatures of use. It can be used for the injection of all types of parts that require high mechanical and temperature performance, such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, automotive parts, etc.

ErcrosBio ® LM 87004 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 60%. CHARACTERISTICS: ErcrosBio ® LM 87004 is a material specifically designed for moulding rigid parts by injection, when good mechanical properties and performance on impact are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 87004 is recommended for injection moulding of parts that require good mechanical properties, even at high temperatures of use. It can be used for the injection of all types of parts that require high mechanical and temperature performance, such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, automotive parts, etc.

ErcrosBio ® LM 87007 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 65%. CHARACTERISTICS: ErcrosBio ® LM 87007 is a material specifically designed for moulding rigid parts by injection, when good mechanical properties and performance on impact are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 87007 is recommended for injection moulding of parts that require good mechanical properties, even at high temperatures of use. It can be used for the injection of all types of parts that require high mechanical and temperature performance, such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, automotive parts, etc.

ErcrosBio ® LM 87008 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 55%. CHARACTERISTICS: ErcrosBio ® LM 87008 is a material specifically designed for moulding rigid parts by injection, when good mechanical properties, high deformation at break and good performance on impact are required. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 87008 is recommended for injection moulding of parts that require good mechanical properties, even at high temperatures of use. It can be used for the injection of all types of parts that require high mechanical and temperature performance, such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, automotive parts, etc.

ErcrosBio ® LM 99000 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 90%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99000 is a material designed for moulding rigid parts by injection, when good mechanical properties are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99000 is recommended for injection moulding of parts with high mechanical requirements and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.

ErcrosBio ® LM 99010 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 95%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1. It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99010 is a material designed for moulding rigid parts by injection, when good mechanical properties are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99010 is recommended for injection moulding of parts with high mechanical requirements and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.

ErcrosBio ® LM 99011 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 95%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99011 is a material designed for moulding large-dimension rigid parts by injection, given its high fluidity, when good mechanical properties are required, even at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99011 is recommended for injection moulding of parts with high mechanical requirements and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.

ErcrosBio ® LM 99012 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 90%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99012 is a material designed for moulding large-dimension rigid parts by injection, given its high fluidity, when good mechanical properties are required, even at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99012 is recommended for injection moulding of parts with high mechanical requirements and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.

ErcrosBio ® LM 99013 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 70%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99013 is a material designed for moulding rigid parts by injection, when good mechanical properties are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99013 is recommended for injection moulding of parts with high mechanical requirements and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.

ErcrosBio ® LM 99016 is a PLA (polylactic acid)-based thermoplastic obtained from renewable natural materials. The content of material of biological origin is over 85%. It is suitable for the production of food packaging in accordance with the criteria of Regulation (EU) No. 10/2011 1 . It is compostable in accordance with the criteria of standard EN 13432 1 . CHARACTERISTICS: ErcrosBio ® LM 99016 is a material designed for moulding rigid parts by injection, when good mechanical properties and high resistance are required at high temperatures. It has high-speed crystallisation, which increases with high mould temperatures (90°C to 110°C). RECOMMENDED APPLICATIONS: ErcrosBio ® LM 99016 is recommended for injection moulding of parts with high mechanical requirements, high rigidity and good performance at high temperatures of use. It can be used for the injection of all types of parts such as casing for electrical equipment, electronics and household appliances, supports, containers, vessels, etc.