ALCUDIA® 3802-N is a black medium density compound, designed to meet the requirements for telecommunication and power cables. The outstanding feature of this product is its very good mechanical properties, its excellent stress cracking resistance and good extrudability. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. TYPICAL APPLICATIONS Black jacketing of telecommunication and power cables. The ALCUDIA® 3802-N extrusion conditions depend on the type of equipment used. The recommended melt temperature to obtain the optimum results is 215°C - 220°C, together with the use of a screw L/D: 20 and compression rate: 4:1. ALCUDIA® 3802-N meets the following specifications: ISO 1872 PE KHC 40T006/012; ASTM D 1248 II, C5, Grade J5; NF C 32-060 GE2. ALCUDIA® 3802N black compound is a high density polyethylene hexene copolymer of high molecular weight mainly designed for the extrusion of microirrigations tapes. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in ALCUDIA® 3802N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound ALCUDIA® 3802N, is designed to produce: TYPICAL APPLICATIONS - Black microirrigation tapes. - Fittings and valves. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

ALCUDIA® 45060UV is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity for oils and dangerous goods. This grade contains stabilisers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent Environmental Stress Cracking Resistance (ESCR) and impact resistance, so it's recommended to IBC tanks. It is useful for hazardous goods packaging according SKZ test certificate 45833/01 TYPICAL APPLICATIONS - IBC tanks - High capacity containers - Automotive fuel tanks Recommended melt temperature range from 180 to 210°C. Processing conditions should be optimised for each production line.

The high density polyethylene ALCUDIA® 47100 is a hexene copolymer of high molecular weight especially apt for the extrusion pipe for protecting cable conduits. Also it can be used as base polymer for identification stripes compound. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Pipe for protecting cable conduits. - Base polymer for identification stripes compound. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

ALCUDIA® 4810 is a copolymer of hexene with medium molecular weight. It is specially designed to make, by blow molding, bottles of sterilized milk. This grade contains a package of additives that includes the antioxidant necessary to reinforce the thermal stability. Excellent behavior in extrusion and sterilization process. Its characteristics confers it high impact strength. On the other hand its good viscoelastic behavior allows an easy recovering of the mould-shape after the sterilization process and storage. TYPICAL APPLICATIONS - Bottles of sterilized milk. - Injection of stoppers and other articles. Recommended melt temperature range from 170 to 190°C. Processing conditions should be optimised for each production line.

ALCUDIA® 49070UV is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow molding, containers of medium and high capacity (up to 5000 litres), for petroleum derivatives. This grade contains stabilizers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) and impact resistance. This grade is suitable to produce containers according to the Spanish UNE-53432 parts 1, 2 and 3 and the EN 13341 in Europe, or NFM-88-560 in France. It is also included in the German DIBT list of materials to contain petroleum derivatives. TYPICAL APPLICATIONS - IBC tanks - High capacity containers. Recommended melt temperature range from 190 to 215°C. Processing conditions should be optimised for each production line.

ALCUDIA® 51100 is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of pipes. It also can be used as base polymer for identification stripes compound. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. This grade is characterized by its very good mechanical properties, excellent cracking resistance and good resistance to internal pressure.

ALCUDIA® 5203 is a high-density polyethylene copolymer of hexene, with middle molecular weight. It is specially designed to make, by extrusion-blow molding, up to 10 liters containers for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and good level of both stiffness and environmental stress cracking resistance can be obtained with ALCUDIA® 5203 due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5502-E natural compound is an hexene copolymer of medium molecular weight apt for the extrusion of corrugated pipes for protection of cables, one or multilayered pipe. This product is supplied in natural colour but it can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line.

ALCUDIA® 53070 is a high-density polyethylene copolymer of hexene, with high molecular weight. It is especially designed to make, by blow moulding, tanks of medium and high capacity. Also for thermoforming sheets. This grade contains stabilisers according to the end-use of the item in order to reinforce the thermal and light stability. It has an excellent environmental stress cracking resistance (ESCR) It has an excellent stiffness and impact resistance, and high chemical resistance, so it's recommended to Jerrican containers. TYPICAL APPLICATIONS Blow moulding of jerrican containers. Recommended melt temperature range from 180 to 210°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5502A is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks of medium size bottles for mineral water and other drinkable goods. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. TYPICAL APPLICATIONS Packaging of water and other drinkable goods. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5502E is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good environmental stress cracking resistance can be obtained with ALCUDIA® 5502E due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimised for each production line. The high density polyethylene ALCUDIA® 5502E is a hexene copolymer of medium molecular weight, due to its characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5503 is a high-density polyethylene copolymer of hexene, with high molecular weight. It is specially designed to make, by blow molding-extrusion, containers for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and excellent level of both stiffness and environmental stress cracking resistance can be obtained with ALCUDIA® 5503 due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of non-aggressive liquid detergents and chemicals. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimized for each production line.

ALCUDIA® 55045 is a bimodal high-density polyethylene with high molecular weight. It is especially designed to make, by blow moulding, tanks of medium and high capacity and jerricans for the transportation of dangerous goods. This grade contains stabilisers according to the end-use of the item in order to reinforce the thermal stability. It has an excellent stiffness and cracking resistance balance, so it's recommended to Jerrican containers for the transportation of dangerous goods. TYPICAL APPLICATIONS Blow moulding of medium, high capacity containers and jerricans. Recommended melt temperature range from 180 to 220°C. Processing conditions should be optimised for each production line.

ALCUDIA® 55250I is a high density polyethylene grade of high fluidity intended for those injection moulding applications in which an excellent processability is required as well as good mechanical properties. TYPICAL APPLICATIONS - Caps and closures - Food containers and domestic packaging - Toys and leisure Recommended melt temperature range from 180 to 240°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5605-N is a bimodal high density polyethylene black compound with a special molecular structure to provide very low shrinkage during processing. Due to this outstanding characteristic, this grade is a very good product for optical fiber and contains a combination of antioxidant system with well dispersed carbon black which provide the following features: excellent protection against thermal oxidation during processing; long term stability and excellent outdoor weather resistance. This grade is widely used for sheathing of jelly-filled constructions and optical fiber. It is also suitable for power cable jacketing.

The high density polyethylene ALCUDIA® 5606T is a homopolymer of medium molecular weight. Due to its good processability characteristics is specially intended for extrusion of doubled corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210 °C. Processing conditions should be optimised for each production line.

The high density polyethylene ALCUDIA® 5703A is a homopolymer of medium molecular weight specially intended for extrusion of mono and doubled wall corrugated drainage and sewage pipes. This product is supplied in natural colour but they can be easily coloured with pigments steady at processing temperature, using dry-colouring or masterbatch techniques. The ALCUDIA® 5703A has an excellent balance between rigidity and others properties as the impact strength. TYPICAL APPLICATIONS - Structured doubled wall without pressure pipes for underground drainage and sewage. - Mono and doubled wall corrugated pipes for protecting cables. Recommended melt temperature range 190 - 210°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5703L is a high-density polyethylene polymer with medium molecular weight. It is specially designed for blow molding-extrusion aseptic filled bottles of milk. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. TYPICAL APPLICATIONS Aseptic filled milk bottles and other liquid dairy products Recommended melt temperature range from 165 to 210°C. Processing conditions should be optimised for each production line.

ALCUDIA® 5803 is a bimodal high-density polyethylene with middle molecular weight. It is specially designed to make, by blow molding-extrusion, tanks for liquid detergents and chemicals. This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability. Good mechanical properties and good level of both stiffness and environmental stress cracking resistance can be obtained with ALCUDIA® 5803 due to its molecular weight and density. TYPICAL APPLICATIONS Packaging of liquid detergents and cleaners. Recommended melt temperature range from 180 to 200°C. Processing conditions should be optimized for each production line.

ALCUDIA® 6006B is white compound based on a copolymer of hexene with medium molecular weight. It is specially designed to make, by blow molding, bottles of sterilized milk. This grade contains a package of additives that includes 1.25% of TiO 2 , in addition to the antioxidant necessary to reinforce the thermal stability. Excellent behavior in extrusion and sterilization process. Its characteristics confers it high impact strength. On the other hand its good viscoelastic behavior allows an easy recovering of the mould-shape after the sterilization process and storage. TYPICAL APPLICATIONS Bottles of sterilized milk. Recommended melt temperature range from 170 to 190°C. Processing conditions should be optimized for each production line.

ALCUDIA® 6006L is a copolymer of hexene with medium molecular weight. It is specially designed to make, by blow moulding, bottles of sterilized milk. This grade contains a package of additives that includes the antioxidant necessary to reinforce the thermal stability. Excellent behavior in extrusion and sterilization process. Its characteristics confers it high impact strength. On the other hand its good viscoelastic behavior allows an easy recovering of the mould-shape after the sterilization process and storage. TYPICAL APPLICATIONS Bottles of sterilized milk. Recommended melt temperature range from 170 to 190°C. Processing conditions should be optimized for each production line.

ALCUDIA® 6080IUV is a high density polyethylene grade of high fluidity intended for those injection moulding applications in which an excellent balance of mechanical properties and good flow properties are required. Technical benefits this grade offers are: - Easy mould filling and quick release from the mould - Good mechanical and physical properties - UV-light protection TYPICAL APPLICATIONS Due to its good balance of mechanical and flow properties, ALCUDIA® 6080IUV is particularly intended for application in which good mechanical properties and weathering resistance are required: - Crates, boxes and storing cases - Rigid and industrial packaging Recommended melt temperature range from 180 to 240°C. Processing conditions should be optimised for each production line.

ALCUDIA® C-220-N is a high molecular weight, high density polyethylene compound designed to provide very low shrinkage during processing. It contains well dispersed carbon black and antioxidant in order to ensure UV radiation resistance and thermal ageing respectively. The outstanding feature of this product is its mechanical properties, excellent outdoor weather resistance and very good processability TYPICAL APPLICATIONS Black jacketing of power and telecommunication cables. It is recommended a melt temperature between 190 - 220°C and the use of a screw L/D: 20 - 28. ALCUDIA® C-220-N meets the following specifications: ISO 1872 PE KHC 40/45 D003/006; ASTM D 1248 III, C4, Grade J5; VDE 0207 Teil3 2YM1.

ALCUDIA® C-240-UV is a natural high molecular weight and high density polyethylene that gives to the compound the following features: excellent processability; high abrasion resistance; good mechanical properties; excellent environmental stress cracking resistance (ESCR) and superior compatibility with pigments. It contains an antioxidant system which warranties protection against thermal oxidation during processing and long term stability. TYPICAL APPLICATIONS Colour Jacketing for power and telecommunication cables. It is recommended an extrusion melt temperature of 220°C and a temperature profile between 190 - 235°C. Optimal processing conditions must be tuned for each production line. ALCUDIA® C-240-UV meets the following specifications: ISO 1872 PE KHN 40D001/003; ASTM D 1248 II, A5, J5; UNESA 3305C.

ALCUDIA® M5204 is a low melt flow rate high density polyethylene with narrow molecular weight distribution. It offers adequate processing properties for production of monofilaments with the highest tensile strength at break, mainly using processing lines with two long stretching ovens. TYPICAL APPLICATIONS ALCUDIA® M5204 gives the highest tenacity monofilaments designed for top products of technical applications: - Fishing nets - Ropes Recommended melt temperature range from 210 to 240°C. Processing conditions should be optimised for each production line.

ALCUDIA® M5206 is a low melt flow rate high density polyethylene with narrow molecular weight distribution. It offers good processing properties for production of monofilaments with very high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA® M5206 gives very high tenacity monofilaments designed for top products of technical applications: - Fishing nets - Ropes Recommended melt temperature range from 210 to 240°C. Processing conditions should be optimised for each production line.

ALCUDIA® M5305 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of monofilaments with high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA®M5305 gives high tenacity and flexible monofilaments with low fibrillation tendency suitable for: - Webs - Ropes - Fishing nets Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® M5309 is a medium melt flow rate high density polyethylene with medium molecular weight distribution. It offers optimum processing properties for production of monofilaments with good tensile strength at break. TYPICAL APPLICATIONS ALCUDIA® M5309 gives flexible monofilaments with very low fibrillation tendency suitable for textile applications: - Nets - Webs Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® R4805 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. TYPICAL APPLICATIONS ALCUDIA® R4805 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for: - Iso Mayer textile applications - Raschel knitted and woven fabrics. - Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® R4805D1 is a low melt flow rate high density polyethylene with medium molecular weight distribution. It offers an optimum balance between mechanical and processing properties for production of tapes with high tensile strength at break. This product is specially formulated with a slip package. TYPICAL APPLICATIONS ALCUDIA® R4805D1 is designed for stretched tapes production based on blown film. It gives flexible tapes with high tenacity and low fibrillation tendency suitable for high speed textil lines: - Iso Mayer textile applications - Raschel knitted and woven fabrics. - Twines and ropes Recommended melt temperature range from 210 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® T100N black compound is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of pressure pipes for drinking water and natural gas. It complies with the requirements of EN 12201 and EN 1555 standards, with a MRS 10MPa - PE100 classification. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in ALCUDIA® T100N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound ALCUDIA® T100N, is designed to produce: TYPICAL APPLICATIONS - Gas distribution and drinking water pressure pipes. - Fittings and valves. - Large diameter pipes without pressure. Recommended melt temperature range 200 - 220°C. Processing conditions should be optimised for each production line.

ALCUDIA® T80N black compound is a high density polyethylene with a broad bimodal molecular weight distribution designed for the extrusion of pressure pipes. It complies with the requirements of EN 12201 and EN 1555 standards, with a MRS 8MPa - PE80 classification. The combination of the antioxidant system and minimum of 2.0 % well dispersed carbon black used in ALCUDIA® T80N provides an excellent protection against thermal oxidation during processing and good long-term thermal stability and UV resistance. Because other good mechanical properties and their characteristics, and an excellent ESCR resistance the polyethylene black compound ALCUDIA® T80N, is designed to produce: TYPICAL APPLICATIONS - Gas, industrial and drinking water pressure pipes. - Fittings and valves. - Large diameter pipes without pressure. Recommended melt temperature range 200 - 210°C. Processing conditions should be optimised for each production line.

ALCUDIA® TR-131 is a high molecular weight hexene copolymer, especially intended for geomembrane extrusion. This material offers easy processability, excellent mechanical properties, good sealing characteristics and high stress crack resistance. It contains antioxidant additive. TYPICAL APPLICATIONS - Waterproof sheets: rubbish damp, water damp Recommended melt temperature range from 200 to 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® TR156 is a high density polyethylene film grade, which combines superior physical properties with excellent processability. Due to high density, the material properties are best utilised by processing at HDPE conditions. Film made of ALCUDIA® TR-156 has good strength, high stiffness, impact and balanced tear resistance. It contains antioxidant additives. TYPICAL APPLICATIONS - Carrier bags. - Industrial liners - Paper lamination films. ALCUDIA® TR-156 is intended for high neck extrusion on HDPE film extruders. The material will provide optimal performance in extrusion and mechanical properties. Recommended extrusion conditions are flat temperature profile with a melt temperature between 210 and 230°C. Processing conditions should be optimised for each production line.

ALCUDIA® TR210 is a high density polyethylene developed to provide excellent mechanical properties, toughness, good environmental stress cracking resistance (ESCR) and stability against oxidative degradation. This product provides a superior performance at high-speed extrusion together with a smooth surface finish of the cable. It is stabilized to be protected from thermal and shear degradation and contains a metal deactivator to ensure long-term ageing properties. TYPICAL APPLICATIONS Solid insulation of telephone single. Skin layer in foam-skin construction. Jelly-filled cable. ALCUDIA® TR210 can be extruded at a high melt temperature between 230°C - 260°C without risk of thermal or shear degradation. The optimum conditions depend on the application and the extrusion equipment used. When processed using proper extrusion conditions, ALCUDIA® TR210 is expected to meet the requirements of the following product and cable specifications: - ISO 1872 PE KHN 45D006/012 - ASTM D 1248 III, A4, Grade E9 - NF C 32-060 ISM3 - BS 6234, Type H03 - VDE 0207 Teil2 2YI1 - EN 50290-2-23 - EN 50288