Greenflex FC 45 BCA is recommended for the production of very wide agricultural films. It has good optical properties, excellent impact resistance and low creep. The resin shows outstanding bubble stability. Sustainability The product Greenflex FC 45 BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FC 45 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FC 45 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FC 45 BCA will be bio circular attributed for 86%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FC 45 is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. Films produced by Greenflex FC 45 exhibit good optical properties, excellent impact resistance and low creep. Main Application Greenflex FC 45 is recommended for the production of very wide agricultural films.

Greenflex FD 20 BCA is recommended for thermo-shrinkable films and multilayer stretch films for food packaging, included deep-frozen food packaging.. It exhibits good optical properties, high impact resistance, tensile strength, elongation at break and low creep. Sustainability The product Greenflex FD 20 BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FD 20 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FD 20 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FD 20 BCA will be bio circular attributed for 95%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FD 20 is an ethylene vinyl acetate copolymer (EVA) suitable for blown film extrusion. Films produced with Greenflex FD 20 exhibit high flexibility and high tear resistance. Main Application Greenflex FD 20 is recommended for thermo-shrinkable films and multilayer stretch films for food packaging, included deep-frozen food packaging.

Greenflex FD 23 BCA is recommended for thermo-shrinkable films and multilayer stretch films for food packaging, included deep-frozen food packaging. Films produced from Greenflex FD 23 BCA have high flexibility and high tear resistance. Sustainability The product Greenflex FD 23 BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FD 23 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA), containing slip and antiblocking, suitable for blown film extrusion. The production of Greenflex FD 23 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FD 23 BCA will be bio circular attributed for 95%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FD 23 is an ethylene vinyl acetate copolymer (EVA), containing slip and antiblocking, suitable for blown film extrusion. Films produced from Greenflex FD 23 have high flexibility and high tear resistance. Main Application Greenflex FD 23 is recommended for thermo-shrinkable films and multilayer stretch films for food packaging, included deep-frozen food packaging.

Greenflex FD 50 BCA is recommended for the production of agricultural films and water proofing membrane having outstanding mechanical performances (flexibility, elasticity and adherence) and dimensional stability. It exhibits good optical and sealing properties, high flexibility and toughness. Sustainability The product Greenflex FD 50 BCA ‘Bio Circular attributed’ is a highly sustainable LLDPE produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FD 50 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FD 50 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FD 50 BCA will be bio circular attributed for 83%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FD 50 is an ethylene vinyl acetate copolymer resin (EVA) for blown film extrusion. Films produced by Greenflex FD 50 exhibit good optical and sealing properties, high flexibility and toughness. Greenflex FD 50 is recommended for the production of agricultural films and water proofing membrane.

Greenflex FF 35 BCA is suitable for the production of general purpose films, stretch hoods and profiles extrusion. The resin shows good stretchability and sealability. Sustainability The product Greenflex FF 35 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FF 35 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FF 35 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FF 35 BCA will be bio circular attributed for 91%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FF 35 is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The resin shows good stretchability and sealability. Main Application Greenflex FF 35 is suitable for the production of general purpose films, stretch hoods and profiles extrusion.

Greenflex FF 45 BCA is recommended for the production of general purpose films, films for greenhouses, stretch hoods and for sanitary applications. Films produced with Greenflex FF 45 BCA show high toughness. Sustainability The product Greenflex FF 45 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FF 45 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FF 45 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FF 45 BCA will be bio circular attributed for 86%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FF 45 is an ethylene vinyl acetate copolymer (EVA) suitable for blown film extrusion. Films produced with Greenflex FF 45 show high toughness. Main Application Greenflex FF 45 is recommended for the production of greenhouse film, stretch hood packaging and sanitary applications.

Greenflex FF 55 BCA is recommended for the production of greenhouse film and flexible packaging, especially where high fracture mechanical properties (impact resistance) are required. Sustainability The product Greenflex FF 55 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FF 55 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FF 55 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FF 55 BCA will be bio circular attributed for 81%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FF 55 F BCA is recommended for the production of greenhouse film and flexible packaging, especially where high fracture mechanical properties (impact resistance) are required. Sustainability The product Greenflex FF 55 F BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FF 55 F BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The production of Greenflex FF 55 F BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FF 55 F BCA will be bio circular attributed for 81%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FF 55 F is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. Films produced with Greenflex FF 55 F show high flexibility. Main Application Greenflex FF 55 F is recommended for the production of general purpose films, greenhouse films and stretch hoods.

Greenflex FF 55 is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. Films produced with Greenflex FF 55 show high flexibility. Main Application Greenflex FF 55 is recommended for the production of general purpose films, greenhouse films and stretch hoods.

Greenflex FH 45 BCA is recommended for silage stretch film application to ensure optimum cling properties when used in combination with other cling agent, production of co-extrusion film, lamination film, standard stretch film, stretch hood, barrier film for food packaging, agricultural film and, generally, for all those applications where the purity of products designed for film extrusion is required. Films produced with Greenflex FH 45 BCA show a low fish eyes content, good elasticity, good optical properties, good sealability at low temperatures. Sustainability The product Greenflex FH 45 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FH 45 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown and cast film extrusion. The production of Greenflex FH 45 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FH 45 BCA will be bio circular attributed for 83%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FH 45 is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FH 45 show a low fish eyes content, good elasticity, good optical properties, good sealability at low temperatures. Main Application Greenflex FH 45 is recommended for silage stretch film application to ensure optimum cling properties when used in combination with other cling agent, production of co-extrusion film, lamination film, standard stretch film, stretch hood, barrier film for food packaging, agricultural film and, generally, for all those applications where the purity of products designed for film extrusion is required.

Greenflex FL 35 is an ethylene vinyl acetate copolymer (EVA) for blown film extrusion. The resin shows good stretchability and sealability. Main Application Greenflex FL 35 is suitable for flexible packaging film having good fracture mechanical properties, for stretch hood packaging and profiles extrusion.

Greenflex FL 45 BCA is recommended for the production of co-extrusion film, lamination film, stretch film, stretch hood, barrier film for food packaging, agricultural film and all those aplications where the typical purity of film grades is required.. Films produced with Greenflex FL 45 BCA show a low fish eyes content, good elasticity, good optical properties, good sealability at low temperatures. Sustainability The product Greenflex FL 45 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FL 45 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer for extrusion/co-extrusion blown and cast film. The production of Greenflex FL 45 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FL 45 BCA will be bio circular attributed for 86%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FL 45 is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FL 45 show a low fish eyes content, good elasticity, good optical properties, good sealability at low temperatures. Main Application Greenflex FL 45 is recommended for the production of co-extrusion film, lamination film, stretch film, stretch hood, barrier film for food packaging, agricultural film and all those aplications where the typical purity of film grades is required.

Greenflex FL 55 BCA is recommended for the production of co-extrusion film, lamination film, stretch film, barrier film for food packaging and all those aplications where the typical purity of film grades is required. Films show a low fish eyes content, high elasticity, good optical properties, good sealability at low temperatures. Sustainability The product Greenflex FL 55 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FL 55 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for blown and cast film extrusion. The production of Greenflex FL 55 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FL 55 BCA will be bio circular attributed for 81%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FL 55 F is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FL 55 F show a low fish eyes content, high elasticity, good optical properties, good sealability at low temperatures. Main Application Greenflex FL 55 F is recommended for the production of co-extrusion film, lamination film, stretch film, barrier film for food packaging and all those aplications where the typical purity of film grades is required.

Greenflex FL 55 is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FL 55 show a low fish eyes content, high elasticity, good optical properties, good sealability at low temperatures. Main Application Greenflex FL 55 is recommended for the production of co-extrusion film, lamination film, stretch film, barrier film for food packaging and all those aplications where the typical purity of film grades is required.

Greenflex FL 65 BCA is recommended for the production of co-extrusion film, lamination film, stretch film, barrier film for food packaging and all those aplications where the typical purity of film grades is required. In coextruded structures it can be used as a compatibilizer with polymers of different nature. Films produced with Greenflex FL 65 BCA show a low fish eyes content, very high elasticity, good optical properties, good sealability at low temperatures. Sustainability The product Greenflex FL 65 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex FL 65 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer for extrusion/co-extrusion blown and cast film. The production of Greenflex FL 65 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex FL 65 BCA will be bio circular attributed for 72%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex FL 65 is an ethylene vinyl acetate copolymer (EVA) for extrusion/co-extrusion blown and cast film. Films produced with Greenflex FL 65 show a low fish eyes content, very high elasticity, good optical properties, good sealability at low temperatures. Main Application Greenflex FL 65 is recommended for the production of co-extrusion film, lamination film, stretch film, barrier film for food packaging and all those aplications where the typical purity of film grades is required. In coextruded structures it can be used as a compatibilizer with polymers of different nature.

Greenflex HN 70 BCA is a medium fluidity grade with high tack, recommended as base component for hot melt adhesives used in packaging, bookbinding and woodworking. Sustainability The product Greenflex HN 70 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex HN 70 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for compounding The production of Greenflex HN 70 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex HN 70 BCA will be bio circular attributed for 72%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex HN 70 is an ethylene vinyl acetate copolymer (EVA) for compounding. Greenflex HN 70 is a medium fluidity grade with high tack. Main Application Greenflex HN 70 is recommended as base component for hot melt adhesives used in packaging, bookbinding and woodworking.

Greenflex MH 40 BCA is recommended for the production flexible items, foamed and crosslinked sheets for shoes. Items produced with Greenflex MH 40 BCA show high elasticity and good mechanical properties. Sustainability The product Greenflex MH 40 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex MH 40 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for injection moulding and extrusion. The production of Greenflex MH 40 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex MH 40 BCA will be bio circular attributed for 83%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex MH 40 is an ethylene vinyl acetate copolymer (EVA) for injection moulding and extrusion. Items produced with Greenflex MH 40 show high elasticity and good mechanical properties. Main Application Greenflex MH 40 is recommended for the production flexible items, foamed and crosslinked sheets for shoes.

Greenflex ML 20 BCA is recommended for the production of flexible items. Sustainability The product Greenflex ML 20 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex ML 20 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for general purpose injection moulding, when a good ESCR resistance is required. The production of Greenflex ML 20 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex ML 20 BCA will be bio circular attributed for 93%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex ML 20 is an ethylene vinyl acetate copolymer (EVA) for general purpose injection moulding, when a good ESCR resistance is required. Main Application Greenflex ML 20 is recommended for the production of flexible items.

Greenflex ML 21 BCA is recommended for the production of flexible items. Greenflex ML 21 BCA, thanks to its particular additives with waxes, can be used at a high transformation speed to obtain high productivity. Sustainability The product Greenflex ML 21 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex ML 21 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for injection moulding applications and it is recommended when a good ESCR is required. The production of Greenflex ML 21 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex ML 21 BCA will be bio circular attributed for 94%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex ML 21 is an ethylene vinyl acetate copolymer (EVA) for injection moulding applications and it is recommended when a good ESCR is required. Greenflex ML 21, thanks to its particular additives with waxes, can be used at a high transformation speed to obtain high productivity. Main Application Greenflex ML 21 is suitable for the production of flexible items.

Greenflex ML 30 BCA is recommended for the production of gaskets, especially if food contact is required, profiles and flexible items. Items produced with Greenflex ML 30 BCA shows good ESCR resistance and elasticity. Sustainability The product Greenflex ML 30 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex ML 30 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for injection moulding and profile extrusion. The production of Greenflex ML 30 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex ML 30 BCA will be bio circular attributed for 91%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex ML 30 is an ethylene vinyl acetate copolymer (EVA) for injection moulding and profile extrusion. Items produced with Greenflex ML 30 shows good ESCR resistance and elasticity. Main Application Greenflex ML 30 is recommended for the production of gaskets, especially if food contact is required, profiles and flexible items.

Greenflex ML 31 BCA is recommended for the production of gaskets, especially for items having food contact, profiles and flexible items. Items produced with Greenflex ML 31 BCA show good resistance to chemicals and good elasticity. Greenflex ML 31 BCA, thanks to its particular additives with waxes, can be used at a high transformation speed to obtain high productivity. Sustainability The product Greenflex ML 31 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex ML 31 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for injection moulding applications and extrusion profile. The production of Greenflex ML 31 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex ML 31 BCA will be bio circular attributed for 91%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex ML 31 is an ethylene vinyl acetate copolymer (EVA) for injection moulding applications and extrusion profile. Greenflex ML 31, thanks to its particular additives with waxes, can be used at a high transformation speed to obtain high productivity. Main Application Items produced with Greenflex ML 31 show good resistance to chemicals and good elasticity. Greenflex ML 31 is recommended for the production of gaskets, especially for items having food contact, profiles and flexible items. Items produced with Greenflex ML 31 show good resistance to chemicals and good elasticity.

Greenflex ML 40 BCA is recommended for the production of flexible items. Items produced with Greenflex ML 40 BCA show high elasticity and flexibility. Sustainability The product Greenflex ML 40 BCA ‘Bio Circular attributed’ is a highly sustainable EVA produced using bionafta from renewable raw materials together with traditional raw materials. In order to attribute the sustainable feedstock component to the final product Versalis applies the Mass Balance approach, a recognized methodology that allows to trace the flow of materials along the value chain and to assign the sustainability characteristic of the raw material to the final product on a documentary basis. Greenflex ML 40 BCA provides the same chemical composition and physical-mechanical performance of the traditional grade, in addition is accompanied by a sustainability declaration that certifies the share of bio attributed product. It is an ethylene vinyl acetate copolymer (EVA) for injection moulding of flexible items. The production of Greenflex ML 40 BCA allows to contribute to the circular economy, since the bionafta used derives from waste from industrial processing of organic substances (e.g. used cooking oils). Greenflex ML 40 BCA will be bio circular attributed for 86%. The exact amount of “bio circular attributed” product will be reported in the sustainability certificate issued upon the delivery of the product.

Greenflex ML 40 is an ethylene vinyl acetate copolymer (EVA) for injection moulding of flexible items. Items produced with Greenflex ML 40 show high elasticity and flexibility. Main Application Greenflex ML 40 is recommended for the production of flexible items.