Biobased high density polyethylene, reinforced with glass fiber. The biobased carbon content (BCC) is > 94 % (calculated). Suitable for injection moulding applications.

Biobased high density polyethylene, suitable for extrusion blow moulding. Contains additives. The biobased carbon content (BCC) is 60 % (measured according ASTM D6866).

Modified biobased high density polyethylene, suitable for injection moulding applications such as lunchboxes. The biobased carbon content (BCC) is 75 % (calculated).

Polyethylene blend with biobased high density polyethylene. The biobased carbon content (BCC) is 64 % (determined according to ASTM D6866). Suitable for injection moulding applications such closures, houseware and packaging.

Biobased high density polyethylene reinforced with mineral fillers. The biobased carbon content (BCC) is > 95 % (calculated). Suitable for cast film extrusion, thermoforming and profile extrusion.

Biobased high density polyethylene for injection moulding applications. Contains mineral fillers. The biobased carbon content (BCC) is 95% (calculated).

Biobased low density polyethylene reinforces with mineral fillers. The biobased carbon content (BCC) is > 90% (calculated). Suitable for injection moulding of household parts like flexible lids.

Polypropylen blend with biobased polyethylene. The biobased carbon content (BCC) is 50% (calculated). Suitable for translucent injection moulding applications such as cups.

Biobased linear low density polyethylene, butene copolymer, blended with low density polyethylene. The biobased carbon content (BCC) is > 75% (determinated according to ASTM D6866). Suitable for extrusion coating and lamination applications.

Biobased linear low density polyethylene, butene copolymer, containing mineral fillers. The biobased carbon content (BCC) is > 85 % (calculated). Suitable for profile extrusion of tubes.

Polypropylene copolymer blend with biobased high density polyethyene. The biobased carbon content (BCC) is > 30% (calculated). Suitable for injection moulding.

Polypropylen copolymer blend with biobased high density polyethylene. The biobased carbon content (BCC) is 33 % (calculated). Suitable for injection moulding applications.

Polypropylen copolymer blend with biobased high density polyethylene. The biobased carbon content (BCC) is 33 % (calculated). Suitable for injection moulding applications such as bins.

Polypropylen copolymer blend with biobased high density polyethylene, containing mineral fillers. The biobased carbon content (BCC) is 33 % (calculated). Suitable for profile extrusion.

Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene. The biobased carbon content (BCC) is 33 % (calculated). Suitable for injection moulding applications.

Post-consumer or post-industrial polypropylen blended with biobased high density polyethylene. The biobased carbon content (BCC) is 33 % (calculated). Suitable for injection moulding applications such as bins.

Biobased high density polyethylene, containing a low amount of wood fibres and functional additives. The biobased carbon content (BCC) is > 90% (determinated according to ASTM D6866). Suitable for injection moulding applications.