DOW™ DGDA-5310 GMB is a Medium Density Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment complying extensively with the requirements of GM13. Utilizing the highest density MDPE allows gives DGDA-5310 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its medium density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes. Principle Characteristics: - Resin designed for geomembranes - Excellent processability in high thickness - Excellent ESCR and oxidation resistance - Meets GM Standard 13

DOW™ DGDA-5311 is a Polyethylene resin designed to cover the demanding geomembrane market that is manufactured by blown or Cast film extrusion. It has excellent mechanical properties, both in tensile and tear and resistance to cracking in an aggressive environment. Utilizing higher density MDPE gives DGDA-5311 NT low product permeability, providing an excellent barrier to water and other liquid media. Thanks to its density, the Dow resin facilitates the winding process during extrusion and the adaptation to the irregularities of the terrain during the installation of the geomembranes. Principle Characteristics: - Resin designed for geomembranes - Excellent processability in high thickness - Excellent ESCR and oxidation resistance

DOW™ DGDA-6098 NT 7 High Density Polyethylene Resin is a HDPE resin designed for use in a variety of blown film applications where excellent processability, stiffness and clarity are needed. Main characteristics: - High melt strength - Easy to process - High stiffness. - High clarity Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) Consult the regulations for complete details.

For Extrusion Coating Applications Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.1a Consult the regulations for complete details.

DOW™ XDMDA-1227 NT 7 High Density Polyethylene Resin is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent Stiffness and Impact Strength - Excellent Organoleptic Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.1a. - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.