A4040 is a high density polyethylene copolymer specifically designed as the base resin for the production of cross-linked pipes according to the PEX B silane process.

A60-70-162 is a high density polyethylene homopolymer, developed specifically for blow molding food containers on reciprocating screw-type equipment. It exhibits excellent processing characteristics and extremely low odor in the finished container. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

B50-35H-176 is a high density polyethylene copolymer developed for blow molding. It is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material contains a fully FDA sanctioned antistat and meets the Food and Drug Administration requirements of 21CFR 177.1520.

B53-35H-011 is a high density polyethylene copolymer developed for blow molding applications. This product is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

B54-25H-127 is a high density polyethylene copolymer developed for blow molding. It is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material contains a fully FDA sanctioned antistat and meets Food and Drug Administration requirements of 21CFR 177.1520.

CAP311US2 is a High Density Polyethylene copolymer manufactured by INEOS Olefins & Polymers intended for the injection and compression molding of screw caps for still mineral water and lightly pressurized beverages. Developed for applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties, CAP 311US2 is well suited for packaging in direct contact with beverages and sensitive food. CAP311US2 contains a slip package for lower cap removal torques and improved capping performance. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

CAP508US1 is a high density bimodal polyethylene copolymer intended for the injection and compression molding of closures for beverages. Because of its high purity and excellent organoleptic properties, this grade is certified as low taste and is intended for packaging in direct contact with beverages. CAP508US1 exhibits excellent stress crack resistance needed for the production of closures intended for packaging of carbonated drinks. CAP508US1 does not contain a slip package, therefore can also be used for packaging still and sparkling water. This material meets the Food and Drug Administration requirements of 21CFR 177.1520. Applications - Injection & Compression Molding - Closures for the packaging of carbonated and hot fill beverages and water - Use in high-demanding applications such as warm climates - Use in reduced weight cap designs Benefits - Outstanding stress cracking resistance - Good processing performance

CP53-30 is a high density polyethylene copolymer developed for corrugated piping applications. This product is recommended for use in applications that are required to meet AASHTO specifications: M 294/MP 7. CP53-30 is a listed PPI Third Party Certified resin.

G50-100 is a high molecular weight, high density polyethylene copolymer developed for sheet extrusion, thermoforming, and large part blow molding where the finished product demands outstanding physical performance. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

HP53-25-155 is a high performance high density polyethylene copolymer for use in blow molding applications requiring excellent environmental stress crack resistance (ESCR). This product meets the Food and Drug Administration requirements of 21CFR 177.1520.

J50-200-178 is a narrow molecular weight high density polyethylene copolymer intended for the production of closures for beverages by either compression or injection molding. Because of its high purity and excellent organoleptic properties, this grade is certified as low taste and is intended for use in direct contact with beverages. Typical applications include caps and closures for carbonated beverages and water. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

J50-1000-181 is a high density polyethylene copolymer intended for the injection molding of closures for beverages. Because of its high purity and excellent organoleptic properties, this grade is certified as low taste and is intended for packaging that is in direct contact with beverages. Typical applications are caps and closures for the packaging of still water, juice,and tea as well as other injection molded applications where low taste and odor are critical. This resin contains a lubrication package for improved release from the mold and lower application torques on bottles. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

J50-1000-187 is a high density polyethylene copolymer intended for the injection molding of closures for beverages. Because of its high purity and excellent organoleptic properties, this grade is certified as low taste and is intended for packaging in direct contact with beverages. This resin contains a low-taste lubrication package for improved release from the mold and lower application torques on the bottles. Typical Applications include caps and closures for the packaging of still water and injection molded applications where low taste and odor are critical. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

J50-2000-119 is a narrow molecular weight high density polyethylene copolymer intended for applications requiring a glossy finish and reasonably good impact strength and rigidity. It is characterized by a high melt index which allows easy processing of medium to thin walled articles. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

J50-200-178 is a high density polyethylene copolymer intended for the injection molding of closures for beverages. Because of its high purity and excellent organoleptic properties, this grade is certified as low taste and is intended for packaging in direct contact with beverages. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

J60-1700-173 is a high density polyethylene homopolymer. This resin is characterized by a narrow molecular weight distribution. Parts fabricated from this material exhibit excellent gloss and rigidity. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

J60-800-178 is a high density polyethylene homopolymer intended for the injection molding of beverage closures. Because of its excellent organoleptic properties, this grade is certified as low taste and is intended for use in direct contact with beverages. Parts fabricated from this material exhibit a glossy surface finish and have good impact strength and rigidity. Typical applications include caps and closures for the packaging of still and sparkling water and other injection molded applications where low taste and odor are critical. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

K38-20-160 is a yellow, UV-stabilized medium density polyethylene copolymer, containing an organic pigment system, designed specifically for natural gas pipe and fittings. Exhibiting excellent long term strength and slow crack growth resistance, K38-20-160 is listed by the Plastics Pipe Institute (in PPI TR-4) as a PE2708 and is certified to the material requirements of ASTM D2513 and CSA B137.4.

K38-20-188 is a natural, UV-stabilized medium density polyethylene pipe and tubing resin designed for natural gas distribution. When blended with an approved INEOS yellow masterbatch, the resulting formulation, known as K38-20-160, is recognized by the Plastics Pipe Institute as a PE2708 resin which exhibits excellent long term strength and outstanding environmental stress crack resistance and is certified to the material requirements of ASTM D2513 and CSA B137.4.

K44-06-122 is a natural high density polyethylene copolymer designed specifically for extrusion of large diameter pipe for potable water, industrial, and mining applications. When blended with an INEOS-approved black masterbatch, the resulting formulation (called K44-06-123) is listed in Plastics Pipe Institute (PPI) TR-4 as a PE 3608 and is certified to ANSI/NSF Standard 14 and CSA Standard B137.1.

K44-08-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. When blended with an INEOS-approved black masterbatch, the resulting formulation (called K44-08-123) is listed in Plastics Pipe Institute (PPI) TR-4 as both a PE 3608 and PE80 material. This formulation is also certified to ANSI/NSF Standard 14 and CSA Standard B137.1

K44-11-128 is a high molecular weight, high density polyethylene copolymer for large part blow molding. It combines excellent processability and outstanding physical performance, particularly environmental stress crack resistance (ESCR) and impact properties. This resin meets the Food and Drug Administration requirements of 21CFR 177.1520.

K44-15-122 is a natural high density polyethylene copolymer designed specifically for extrusion of pressure pipe and tubing. When blended with an INEOS-approved black masterbatch, the resulting formulation (called K44-15-123) is listed in Plastics Pipe Institute (PPI) TR-4 as both a PE 3608 and PE80 material and is certified to NSF/ANSI Standard 14 and CSA Standard B137.1.

K44-24-122 is a natural high density polyethylene copolymer designed specifically for pipe coating and extrusion. It complies with the virgin polyethylene resin requirements in CSA Z245-21.

K46-06-185 is a natural high molecular weight, high-density copolymer polyethylene developed for automotive fuel tanks. It combines excellent processability and outstanding physical performance, particularly environmental stress crack resistance (ESCR) and impact properties. This grade's high melt strength aids the continuous extrusion production of multi-layer tanks.

T50-1000-178 is a narrow molecular weight distribution high density polyethylene copolymer intended for general purpose injection molding and extrusion applications. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-1000-181 is a lubricated, narrow molecular weight distribution high density polyethylene copolymer intended for general purpose injection molding and extrusion applications. This resin contains a lubrication package for improved release from the mold. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-1000-187 is a narrow molecular weight distribution high density polyethylene copolymer intended for general purpose injection molding and extrusion applications. This resin contains a lubrication package for improved release from the mold. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-2000-119 is a high density, narrow molecular weight distribution polyethylene copolymer intended for general purpose injection molding and extrusion applications requiring a glossy surface finish and reasonably good impact strength and rigidity. It is characterized by a high melt index which allows easy processing of medium to thin-walled articles. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-200-178 is a high density polyethylene copolymer with narrow molecular weight distribution. It is intended for injection molding applications which require high impact resistance and good environmental stress crack resistance. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-500-171 is a high density polyethylene copolymer with a narrow molecular weight distribution. It is intended for injection molding applications where a good balance of processability and end-use properties are required. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

T50-500-196 is a narrow molecular weight high density polyethylene copolymer intended for injection molding applications where a good balance of processability and end-use properties are required. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520.

T50-800-01 is a high density polyethylene copolymer having a narrow molecular weight distribution intended for general purpose injection molding applications where a good balance of processability and end-use properties are required. This material meets the Food and Drug Administration requirements of 21CFR 177.1520.

TC46-25 is a natural high density polyethylene copolymer designed specifically for telecommunications ducting to meet or exceed the material requirements in conduit specifications ASTM F2160, UL 651B and NEMA TC-7. TC46-25 balances stiffness, ESCR and molecular weight to provide required toughness and crush strength without compromising processability.

TUB121N is a natural bimodal high density polyethylene copolymer designed for extrusion of potable water, natural gas, industrial and mining pipe. When blended with an approved black concentrate, the resulting formulation ("TUB121") is listed by the Plastics Pipe Institute (PPI TR-4, as both PE 4710 and PE 100) and is certified to NSF/ANSI Standards 14 and 61, CSA B137.1 and CSA B137.4.