DOW LDPE 515E Low Density Polyethylene Resin is a 3.2 melt index, medium density LDPE resin for the high-speed tissue overwrap market offering a good balance between optical properties such as gloss and haze, stiffness and low COF. This product contains slip and antiblock additives. Note: DOW LDPE 515E Low Density Polyethylene Resin should comply with FDA regulation 177.1520(c)2.2 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact you nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products - High clarity tissues overwrap

DOW LDPE 525E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor anti-block additives. Note: DOW LDPE 525E Low Density Polyethylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)2.2 and with EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for whether the use complies with all relevant regulations. Further Complies with: - ISCC PLUS certification for renewable-based plastics Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films.

DOW LDPE 525E REN Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor anti-block additives. Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films. Complies with: - U.S. FDA 21 CFR 177.1520 (c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics

DOW LDPE 525E Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 195 °C. This resin, when properly fabricated, shows excellent mechanical properties, consistent with its higher density (high stiffness) when compared to standard resins, whilst maintaining very high clarity and gloss. It shows good draw down properties and processability. This product does not contain slip nor antiblock additives. Note: DOW LDPE 525E Low Density Polyethylene Resin should comply with U.S. FDA 21 CFR 177.1520(c)2.2 and with EU, No 10/2011 when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for whether the use complies with all relevant regulations. Applications: - High clarity lamination films. - Label Films - Packaging of soft products such as hand tissues, toilet tissues, feminine hygiene products. - High clarity tissues overwrap film. - Produce bags. - Food packaging films.

DOW LDPE 535E is a 0.6 melt index, medium density LDPE suitable for shrink film application offering a good balance between shrink performance (hot and cold shrink), optical properties such as high gloss and low haze and mechanical performance. Main Characteristics: - LOW Density Polyethylene Resin - Blown Film Extrusion - Collation Shrink Film Complies with: - U.S. FDA U.S. FDA 177.1520(c) 2.2 - EU, No 10/2011 - Consult the regulations for complete details.

- Complies with U.S. FDA 21 CFR 177.1520(c) 2.2 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details

DOW LDPE™ 545E is 0.9 melt index, medium density LDPE suitable for collation shrink film application offering a good balance between shrink performance (hot and cold shrink), optical properties such as high gloss and low haze and mechanical performance. Main Characteristics: - Low Density Polyethylene Resin - Film Extrusion: Blown - Collation Shrink Film - Blends with LLDPE Complies with: - EU, No 10/2011 - U.S. FDA 177.1520(c)2.2 - Consult the regulations for complete details.

DOW LDPE 555E is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides exceptional bubble stability, high levels of shrink, excellent balance of stiffness, toughness and tear resistance, and a very good clarity. Main Characteristics: - High output rates - Very high shrink - Good stiffness-toughness balance - High puncture resistance - High tear resistance

DOW LDPETM 582E Polyethylene Resin can be readily extruded using conventional blown film techniques utilising melt temperatures between 150 and 170°C. DOW LDPE 582E Polyethylene Resin, when properly fabricated, shows good mechanical properties and high optical properties. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives. Regulations: DOW LDPE 582E Polyethylene Resin should comply with: - U.S. FDA 21 CFR 177.1520(c) 2.2 - EU, No 10/2011 - U.S. FDA-DMF - Consult the regulations for complete details. Applications: - Light produce bags. - Soft goods packaging. - Textile packaging. - High clarity applications.

- A formulated clarity film resin for thin gauge optical packaging - Optimum gauge range: 0.8 - 2.5 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2. - Complies with EU, No 10/2011 - Consult the regulations for complete details.

- A shrink film resin with good optics for packaging applications - Optimum gauge range: 1.0-3.0 mil - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Complies with U.S. FDA-DMF - Complies with Canadian HPFB No Objections(With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details.

DOW LDPE 621I Resin is a low density polyethylene resin intended for foam and blown film applications requiring high melt strength. - Specialty resin designed for high melt strength applications - Provides excellent bubble stability Complies with: - U.S. FDA 21 CFR 177.1520 (c) 2.1 - Canadian HPFB No Objection Consult the regulations for complete details.

DOW™ LDPE 690 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.2 - USP Class VI - Drug Master File Listing - Canadian HPFB (No Objections) - EU, No 10/2011 - Consult the regulations for complete details.

DOW™ LDPE 692 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21CFR 177.1520 (c) 2.1 - USP XXIII Class VI - Drug Master File Listing Consult the regulations for complete details.

LDPE 7010E is a High Speed Extrusion Coating Resin Main Characteristics: - Designed for high speed extrusion coating - Robustness and consistency in melt drawing - Reliable Sealant Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - Consult the regulations for complete details.

Dow™ LDPE 722 is used in flexible packaging and paperboard coating applications such as liquid/juice, laminate tube, condiment pouches, dry foods packaging, snack foods packaging, moist foods packaging, sugar pouches, lidding stock and medical packaging. DOW LDPE extrusion coating resins provide optimal neck-in and draw-down performance with minimal taste/odor contribution. DOW Polyethylene 722 is a broad molecular weight distribution homopolymer designed to offer good impact strength and crack resistance, with excellent flexibility. The resin has good processability over a wide range of molding conditions. - Typical applications include caps/closures - Good impact, ESCR with excellent flexibility Complies with: - CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520 (c) 2.2 - U.S. FDA DMF Consult the regulations for complete details.

DOW™ LDPE 740E R Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E R displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - ISCC PLUS certification for bio-based plastics Consult the regulations for complete details.

DOW™ LDPE 740E REN Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E REN displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW™ LDPE 740E Low Density Polyethylene Resin has been designed with a specific focus on the compounding industry. DOW™ LDPE 740E displays good processability, ease of blending, and a controlled, low gel level. The resin is therefore suitable for the production of high quality masterbatches. Main Characteristics: - Designed for compounding - Good blendability - Good processability - Consistently low gel level Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.2 Consult the regulations for complete details.

- A low density polyethylene for stretching/cling film applications - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1 - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details

DOW LDPE 750E Polyethylene Resin is a low molecular weight, low density compounding grade designed for masterbatch production. The product gives an excellent combination of processability and blendability. Main Characteristics: - Low gel specification. - Excellent processability. - Low power consumption. - Excellent additive retention. - Good oxygen induction time. Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 177.1520(c)2.1 Consult the regulations for complete details.

- A high additive film resin for general packaging applications - For cast film extrusion - A fast blooming resin for high speed bag conversion - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.2 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Complies with Japan Hygienic Olefin and Styrene Plastics Association - Consult the regulations for complete details.

DOW LDPE 770G is Low Density Polyethylene Resin for Food and Industrial Packaging Main Characteristics: - Specially designed for high melt strength applications - Provides excellent bubble or web stability in monolayer, coex or blend configurations - Cast or blown film and extruded sheet Complies with: - U.S. FDA 21 CFR 177.1520 ( c )2.2 - EU, No 10/2011 Consult the regulations for complete details.

LDPE 780E Low Density Polyethylene Resin can be readily processed using conventional injection moulding techniques utilising melt temperatures between 140 and 250°C, a mould temperature between 10 and 50°C, and injection pressure between 50 and 150 MPa. When properly injection moulded, 780E Low Density Polyethylene Resin exhibit: - Excellent flow - Good rigidity - Good surface gloss Note: LDPE 780E Low Density Polyethylene Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for contact applications. Please, contact your nearest Dow office for food contact compliance statements.The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: - Housewares. - Toys & leisures. - Containers. - Compounding. Complies with Canadian HPFB No Objection Complies with U.S. FDA 21 CFR 177.1520

DOW™ LDPE 91003 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

DOW™ LDPE 91020 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for blow-fill-seal, extrusion blow molding, and injection blow molding applications with good flexibility and good chemical resistance. It is also suitable for medical packaging films. Main Characteristics: - Good flexibility - Good chemical resistance - Good stiffness Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - USP Class VI - Drug Master File Listing - USP <661.1> - European Pharmacopeia 3.1.3 and 3.1.4 Consult the regulations for complete details.

- Low Density Polyethylene (LDPE) - Typical applications include lids, caps/closures, general purpose - Excellent clarity - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with U.S. FDA -DMF. - Complies with U.S. USP - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details. DOW Polyethylene 955I Low Density is a medium molecular weight distribution homopolymer designed to offer excellent clarity and flexibility and good toughness with low warpage. This resin has good processability over a wide range of molding conditions.

- Low Density Polyethylene (LDPE) - Typical applications include lids - Excellent clarity, flexibility, low warpage - Complies with U.S. FDA 21 CFR 177.1520 (c) 2.1. - Complies with Canadian HPFB No Objection (With Limitations) - Consult the regulations for complete details. DOW Polyethylene 959S Low Density Resin is a medium molecular weight distribution homopolymer. This resin has good processability over a wide range of molding conditions.

- Low Density Polyethylene (LDPE) - Typical applications include toys, lids, and closures - Good gloss, rigidity, excellent flow - Complies with U.S. FDA 21 CFR 177.152 (c) 2.1 - Complies with Canadian HPFB No Objection (With Limitations) - Complies with EU, No 10/2011 - Consult the regulations for complete details DOW Polyethylene 993I Low Density Polyethylene Resin is a medium molecular weight distribution homopolymer designed to offer good gloss and rigidity with excellent flow characteristics. This resin has good processability over a wide range of molding conditions.

DOW LDPE™ PG 7004 Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 polyethylene resin exhibits: - Excellent draw down. - Good edge stability. - Low neck-in. Complies with: - U.S. FDA-DMF - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Paper board - Foil coatings for packaging food and non-food

DOW LDPE™ PG 7004 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Housewares. - Toys. - Containers. - Lids. - Caps.

DOW LDPE™ PG 7004 R Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 R Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 R Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 R polyethylene resin exhibits: - Excellent draw down - Good edge stability - Low neck-in Applications: - Paper board - Foil coatings for packaging food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 R Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Applications: - Housewares - Toys - Containers - Lids - Caps Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for renewable-based plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 REN Polyethylene Resin is typically used in extrusion coating applications. DOW LDPE PG 7004 REN Polyethylene Resin is designed for processing on conventional LDPE extrusion coating hardware at melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. DOW LDPE PG 7004 REN Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, DOW LDPE PG 7004 REN polyethylene resin exhibits: - Excellent draw down - Good edge stability - Low neck-in Applications: - Paper board - Foil coatings for packaging food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE™ PG 7004 REN Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Applications: - Housewares - Toys - Containers - Lids - Caps Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - U.S. FDA-DMF - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.

DOW LDPE™ PG 7008 Polyethylene Resin from Dow has been designed to exhibit good processability, balanced physical properties, good rigidity and surface gloss, and excellent organoleptics when it is properly injection moulded. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details. Applications: - Housewares - Toys - Containers - Caps

Dow LDPE PG 7008 Polyethylene Resin is typicalled used in extrusion coating applications. Dow LDPE PG 7008 Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - Canadian HPFB No Objection Consult the regulations for complete details.

DOW™ LDPE PG 7008 R Polyethylene Resin is typically used in extrusion coating applications. Dow LDPE PG 7008 R Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 R Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 R Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - EU, No 10/2011 - ISCC PLUS certification for bio-based plastics Consult the regulations for complete details.

DOW™ LDPE PG 7008 REN Polyethylene Resin is typically used in extrusion coating applications. Dow LDPE PG 7008 REN Polyethylene Resin can be readily processed using conventional LDPE extrusion coating hardware of melt temperatures of 270 to 335°C, preferably less than 290°C, for best sensory performance. Dow LDPE PG 7008 REN Polyethylene Resin provides low volatile organic carbon (VOC) emissions in extrusion, contributing to low factory emissions and optimal sensory performance. When processed on suitable hardware, Dow LDPE PG 7008 REN Polyethylene Resin exhibits excellent draw down good edge stability and low neck-in. Applications: - Paper, board and foil coatings for packaging, food and non-food. Complies with: - U.S. FDA 21 CFR 177.1520(c)2.2 - U.S. FDA-DMF - EU, No 10/2011 - ISCC PLUS certification for bio-circular plastics Consult the regulations for complete details.