CONTINUUM™ DGDA-2420 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with a UV stabilizer for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, irrigation and drip tube. Industrial Standards Compliance: - ASTM D 3350: cell classification PE277370D - ISO PE 80 pipe grade - ASTM PE 2708 pipe grade - 1250 psi HDB @ 73F, 800 psi HDS at 73F, and 1000 psi HDB at 140F Consult the regulations for complete details.

CONTINUUM™ DGDA-2420 YL2 Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product is formulated with UV stabilizers for outdoor storage. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes. Industrial Standards Compliance: - ASTM D 3350: cell classification: -- Natural - PE277370D -- Yellow - PE277373E (Note A) - NSF International: Standard 14 - Canadian Standards Association (CSA): B137.4 - PE2708 PLUS - Plastics Pipe Institute (PPI): -- ASTM PE 2708 pipe grade - 1250 psi HDB at 73°F, 800 psi HDS at 73°F, and 1000 psi HDB at 140°F NOTES: (A) The first 5 numbers of the cell classification are based on natural resin. The last number and letter are based on yellow resin. (natural resin plus 2.0% DFDA 0022 YL2).

Industrial Standards Compliance: - ASTM D 3350: cell classification PE435440A CONTINUUM DGDA-2488 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. It is specifically designed for use in all duct and cable in conduit (CIC) applications for both telecommunications and power cables. Typical uses include high performance conduit for fiber optic networks and 5G expansion. The natural resin combined with color concentrate can be readily processed by any current duct or conduit extrusion method in all sizes at commercial rates.

CONTINUUM™ DGDA-2490 BK GL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ISO Standard -- MRS 10 / 20°C, PE100 listed by Exova -- CRS 10 (20°C, 100 yr); CRS 8 (40°C, 90 yr); CRS 6.3 (60°C, 11 yr); CRS 11.2 (14°C, 50 yr)

CONTINUUM™ DGDA-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445576C CC2 (MRS)(See NOTES A) -- Black - PE445574C CC2 (HDB) (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDA-2490 BK (See NOTES A) -- ISO PE100 pipe grade - CRS 10 @ 20°C; MRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr; CRS 11.2 @ 14°C, 50 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDA-2490 Black 100 (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2490 BL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural - PE445574A CC2 -- Blue - PE445574E CC3 (See Notes A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe - CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- Blue Pipe - CONTINUUM™ DGDA 2490 BL (See Notes B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on blue resin (natural resin plus 2% DFDB-0027 BL2). (B) Natural resin extruded under proper conditions with 2.0% blue masterbatch DFDB-0027 BL2

CONTINUUM DGDA-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC2 (MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC2 (HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM DGDA-2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F - Black Pipe - CONTINUUM DGDA-2490 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr; CRS 11.2 @ 14°C, 50 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDA-2490 NT - Black Pipe - DGDA-2490 BK (See NOTES A) U.S. FDA 21 CFR 177.1520(c)3.2a Consult the regulations for complete details NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDA-2490 WH Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include municipal water service lines, industrial piping, mining and sewage. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Natural — PE445574A CC2 -- White - PE445574E CC0 (See Note A) - Plastics Pipe Institute (PPI): TR-4 -- Natural Pipe — CONTINUUM™ DGDA 2490 NT -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F -- White Pipe — CONTINUUM™ DGDA 2490 WH (See Note B) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 Consult the regulations for complete details. NOTES (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on white resin (natural resin plus 2% DFDA-0027 WH 2). (B) Natural resin extruded under proper conditions with 2.0% white masterbatch DFDA-0027 WH2

CONTINUUM™ DGDA-2492 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black - PE445576C CC2 (MRS) (See notes A) - Black - PE445574C CC2 (HDB) (See notes A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM™ DGDA-2492 BK (See Notes A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 BK³ ASME - Code Case N755 Consult the regulations for complete details. Notes: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT N Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include water pipes at nuclear power facilities, natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C CC2 (See NOTES) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492N BK -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black PE4710 Pipe - CONTINUUM DGDA-2492 Consult the regulations for complete details. NOTES: Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A CC0(MRS) - Black - PE445576C CC2 (MRS) (See NOTES A) - Natural - PE445574A CC0(HDB) - Black - PE445574C CC2 (HDB) (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDA-2492 BK (See NOTES A) -- ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 6.3 @ 60°C, 11 yr -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDA-2492 Black (See NOTES B) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDA-2502 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDA-2502 BK has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC0 - Black - PE445574C CC2 (see Notes A & B) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDA-2502 NT -- ASTM PE4710 pipe grade - 1600psi HDB,1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - Black Pipe - CONTINUUM DGDA-2502 BK (see Notes 1 & 2) -- ISO PE100 Pipe grade - MRS 10 @ 20° C -- ASTM PE4710 pipe grade - 1600psi HDB, 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International : Standard 14 & 61 - Natural Pipe - DGDA-2502 NT - Black Pipe - DGDA-2502 BK (see Notes A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: - ASTM D 3350: cell classification - Black - PE445576C - Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES A) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; MRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB @ 73°F and 1000psi HDB @ 140°F - National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES A) - Standard 14 and 61. - Consult the regulations for complete details. CONTINUUM™ DGDB-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445576A - Black - PE445576C (See NOTES A & B) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDB-2490 BK 100 (See NOTES B) - ISO PE100 pipe grade - MRS 10 @ 20°C; CRS 10 @ 20°C, 100 yr; CRS 8 @ 40°C, 90 yr; CRS 6.3 @ 60°C, 11 yr - ASTM PE4710 pipe grade - 1600psi HDB and 1000 psi HDS @ 73°F and 1000psi HDB @ 140°F National Sanitation Foundation (NSF): Standard 14 and 61 - Black Pipe - DGDB-2490 (See NOTES B) Consult the regulations for complete details. CONTINUUM™ DGDB-2490 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: - ASTM D 3350: cell classification -- Black - PE445574C CC2 (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM™ DGDC-2480 BK Bimodal Polyethylene Resin (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK).

CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A - Black - PE445574C (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Natural Pipe - CONTINUUM™ DGDC-2480 NT - Black Pipe - CONTINUUM DGDC-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2480 NT - Black Pipe - DGDC-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092).

CONTINUUM™ DGDC-2490 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600 psi HDB and 1000 psi HDS @ 73°F -- 1000 psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM DGDC-2490 BK (See NOTES A) - CSA B137.1 PE4710 PLUS and B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2492 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural Resin - PE445574A CC3 - Black Resin - PE445574C CC3 (See NOTES A) Plastics Pipe Institute (PPI): TR-4: - Black Pipe - CONTINUUM™ DGDC-2492 BK (See NOTES A) - ASTM PE4710 pipe grade -- 1600psi HDB and 1000psi HDS @ 73°F -- 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - CONTINUUM™ DGDC-2492 Black (See NOTES B) Canadian Standards Association (CSA) - Black Pipe - B137.1 PE4710 PLUS - Black Pipe - B137.4 PE4710 PLUS Consult the regulations for complete details. NOTES: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092). (B) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDC-2502 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth, rapid crack propagation, chlorinated water and high melt strength is desired. Suitable applications include natural gas distribution pipes, large diameter industrial piping, mining, sewage, and municipal water service lines. DGDC-2502 NT has excellent processability for the full range of pipes sizes and wall thicknesses to include heavy wall pipe. Industrial Standards Compliance: ASTM D 3350: cell classification - Natural - PE445574A CC3 - Black - PE445574C CC3 (see Notes A and B) - Plastics Pipe Institute (PPI): TR-4Natural Pipe - CONTINUUM DGDC-2502 NT ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - Black Pipe - CONTINUUM DGDC-2502 BK (see Note A & B)ASTM PE4710 pipe grade - 1600 psi HDB and 1000 psi HDS @ 73°F, and 1000 psi HDB @ 140°F - ISO PE100 pipe grade - MRS 10 @ 20° C - NSF International: Standard 14 and 61 - Natural Pipe - DGDC-2502 NT - Black Pipe - DGDC-2502 BK (see Note A & B) Consult the regulations for complete details. Notes: (A) The first five numbers of the cell classification are based on natural resin. The last number and letter are based on black resin (natural resin plus 6.5% DFNF-0092 BK). (B) Natural resin extruded under proper conditions with 6.5% carbon black masterbatch DFNF-0092 BK.

CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance ASTM D 3350: cell classification - Black - PE445574 CC0 (See NOTES A) Plastics Pipe Institute (PPI): TR-4 - Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) - ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F NSF International: Standard 14 and 61 - Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DGDD-2480 NT Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines. Industrial Standards Compliance - ASTM D 3350: cell classification -- Natural - PE445574A -- Black - PE445574C (See NOTES A) - Plastics Pipe Institute (PPI): TR-4 -- Black Pipe - CONTINUUM DGDD-2480 BK (See NOTES A) -- ASTM PE4710 pipe grade - 1600psi HDB and 1000psi HDS @ 73°F, and 1000psi HDB @ 140°F - NSF International: Standard 14 and 61 -- Black Pipe - DGDD-2480 BK (See NOTES A) Consult the regulations for complete details. NOTES: (A) Natural resin extruded under proper conditions with carbon black masterbatch DFNF-0092 (6.5%).

CONTINUUM™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in compression and injection molded beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. CONTINUUM™ DMDA-1260 offers improved performance for injection molded fitments designed for fitted pouches where its balance of properties are desired. CONTINUUM™ DMDA-1260 delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end results are longer term closure performance, easy opening closures without the use of slip agent and consistent processing. Main Characteristics: - Excellent Stiffness, ESCR, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - High Heat Deflection Temperature - Controlled Sensory Properties Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - Europe Commission Regulation (EU) No 10/2011 - U.S. USP CLASS VI Consult the regulations for complete details.

CONTINUUM™ DMDC-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. Its unique properties also make it suitable for living hinge closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA-DMF - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDC-1270 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications including carbonated soft drink and hot fill closures. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Additive Complies with - U.S. FDA 21 CFR 177.1520(c)3.2a - Canadian HPFB No Objection - Europe Commission Regulation (EU) No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection - USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes

CONTINUUM™ DMDD-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - EU, No 10/2011 - U.S. FDA-DMF - Canadian HPFB No Objection Consult the regulations for complete details.

CONTINUUM™ DMDE-1250 NT 7 High Density Polyethylene Resin (HDPE) is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of environmental stress crack resistance, stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Main Characteristics: - Excellent ESCR, Stiffness, and Impact Strength - Excellent Sensory Properties - Excellent Processing Characteristics - Contains Slip Agent Complies with: - U.S. FDA 21 CFR 177.1520(c) 3.2a. Consult the regulations for complete details.

DMDE-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDE-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 - Consult the regulations for complete details.

CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDE-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. FDA DMF - U.S. USP Class VI - Canadian HPFB No Objection - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. DMDF-6620 NT 7 is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package household industrial chemicals (e.g. detergents, and fabric softeners), toiletries and cosmetics (e.g. shampoos, creams, lotions, etc.), health, pharmaceutical, and food products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520(c)3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.

CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance and excellent gas barrier properties. CONTINUUM™ DMDF-6620 NT 7 HEALTH+™ Bimodal is specifically designed for use in multiple types of blow molding processes, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance and gas barrier properties. This product offers excellent processability with low plate out properties. This product is especially well suited for containers used to package health care and pharmaceutical products. - High stiffness for superior top-load performance - Excellent environmental stress crack resistance - Excellent gas barrier properties - High impact strength - Good extrusion characteristics Complies with: - U.S. FDA 21 CFR 177.1520 (c) 3.2a - U.S. USP Class VI - EU, No 10/2011 Consult the regulations for complete details.