SABIC® LLDPE 318BJ is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJ exhibit excellent optical properties, puncture resistance and tear strength .SABIC® LLDPE 318BJ is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 318BJA is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJA exhibit excellent optical properties, puncture resistance and tear strength. SABIC® LLDPE 318BJA is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.

318CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications. It contains optimized level of antioxidants and does not contain any slip and antiblock additives. Sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required.

LLDPE 319BJ is a butene Linear Low Density Polyethylene for general cast extrusion film applications. Main Characteristic and Applications: ? Used in Industrial, Food & Specialty Packaging ? Better optics and processability ? Better color stability This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 320BJ is a linear low density polyethylene resin intended for cast film applications. This resin has good flow characteristics for easy processing. Films made from this resin exhibit excellent transparency, and good toughness properties.

SABIC® 320BT is an ethylene-butene copolymer designed for wire and cable application. 320BT contains high antioxidant, no slip and no antiblock.

SABIC® 320NT is an ethylene-butene copolymer designed for wire and cable application. it is designed for high speed cable extrusion line, product use 320NT has excellent cable outlook, compare to the other polyethylene, 320NT is designed to reduce the use of additive during compounding, suggest the customer to optimize the silane and peroxide amount for 320NT based material, suitable for one-step silane crosslinking low voltage power cable insulation. 320NT contains no slip and no antiblock.

SABIC® 323NT is an ethylene-butene copolymer designed for wire and cable application. it is designed for high speed cable extrusion line, product use 323NT has excellent cable outlook, compare to the other polyethylene. 323NT can also be used in cast film application and it contains no slip and no antiblock.

324CNJ is a Linear Low Density Polyethylene TNPP free grade designed for wire and cable applications. It contains low level of antioxidants and does not contain any slip and antiblock additives. Sufficient antioxidant and Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required.

SABIC® LLDPE 518NJ is a fractional melt-index butene linear low density polyethylene resin. Films produced from this resin have high toughness, good puncture resistance, good heat sealing behaviour and excellent machinability on conversion lines. This grade is TNPP free.

SABIC® 518NT is an ethylene-butene copolymer designed for blown film application. It has excellent mechanical strength, puncture resistance, high tensile strength and sealing property. 518NT contains no slip and no antiblock. 518NT contains no slip and no antiblock.

SABIC® LLDPE 6118LE is a hexene linear low density polyethylene resin. Films made from this resin exhibitgood tensile strength, stiffness, dart drop impact strength, tear strength and hottack properties. This resincontains anti block and slip agent. Application Typical application for SABIC® LLDPE 6118LE are heavy duty bags, lamination films, agriculture films, stretchwrap films, frozen food packaging and other applications requiring high impact strength, high tear resistance and improved sealing properties. Film properties Film of 50 µm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 6118NSF is a hexene linear low density polyethylene resin. Films made from this resin exhibit good tensile strength, stiffness, dart drop impact strength, tear strength and seal/hottack properties. Application: Typical application for SABIC® LLDPE 6118NSF are heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications requiring higher impact strength, high tear resistance and improved sealing properties. Film properties: Film of 50 µm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 6135NE is a hexene linear low medium density polyethylene resin. Films made from this resin exhibit a good balance between mechanical properties (like impact strength, tear strength) and optical properties on the one hand and stiffness on the other hand. Typical applications for SABIC® LLDPE 6135NE are stand-up pouches, lamination films, surface protection film, MDO film and other applications requiring a balance between high impact strength, tear resistance and stiffness. The grade is typically used for multi-layer structures. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 6318BE is a hexene linear low density polyethylene resin for cast film applications. The product is typically formulated for optimum thermal stability at high temperatures used in cast film extrusion. Films produced from this grade exhibit good optical properties, toughness, puncture resistance and tear strength. Application SABIC® LLDPE 6318BE resin is typically used for pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. The grade is also suggested for blending with ethylene/butene copolymer LLDPE and LDPE for improving strength. Film properties Properties are determined on 20 µm cast stretch film produced on a 2 m commercial cast stretch line: melt temperature 270 °C, chill roll temperature 20 °C and line speed 450 m/min. Processing conditions SABIC® LLDPE 6318BE is extrudable with conventional cast film extrusion equipment. Temperatures 250- 300°C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

6318BJ resin is a hexene comonomer based Linear Low Density Polyethylene TNPP free grade designed to provide easy processability and specially formulated for optimum thermal stability at high processing temperatures used during production of Cast films. Films produced using this resin gives excellent optical properties, toughness, puncture resistance and tear strength.

SABIC® LLDPE 6335BE is a hexene linear low density polyethylene resin for cast film applications. The product is typically formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast films produced from SABIC® LLDPE 6335BE exhibit excellent optical properties, toughness, puncture resistance, tear strength and stiffness. Application SABIC® LLDPE 6335BE resin is recommended for use in non cling layers in pallet stretch wrap (pre-stretch), high performance draw down films and other mono layer and coextruded film applications where high strength is required. Film properties Properties are determined on 20 µm cast stretch film produced on a 2 m commercial cast stretch film line: melt temperature 270 °C, chill roll temperature 20 °C and line speed 450 m/min. Processing conditions SABIC® LLDPE 6335BE is extrudable with conventional cast film extrusion equipment. Minor machine modification may be required for optimum use. Cast film melt temperatures 250 - 300 °C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE 6821NE is a hexene linear low density polyethylene. Films made from this resin exhibit good tensile strength, stiffness, dart drop impact strength, tear strength and hottack properties. Application Typical applications for SABIC® LLDPE 6821NE are heavy duty bags, lamination films, agriculture films, stretch wrap films, frozen food packaging and other applications requiring high impact strength and tear resistance. Film properties Film of 50 µm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

6821NJ is a fractional melt index hexene copolymer based Linear Low Density Polyethylene TNPP free grade suitable for high strength packaging applications. Films produced using this resin gives outstanding toughness, excellent puncture resistance, good sealing characteristics and tear resistance. 6821NJ contains no slip and no antiblock additive.

SABIC® LLDPE 726NE is a butene linear low density polyethylene resin. This grade gives blown films a relatively high stiffness for good machinability and a good overall balance of other performance properties, such as puncture resistance, impact strength and heat sealability. Application Typical applications for SABIC® LLDPE 726NE are shipping sacks, produce bags, can liners and carrier bags. SABIC® LLDPE 726NE has very good optical properties when blended with a LDPE (15-85%). Film properties Film of 50 µm and BUR=2 has been produced on Kiefel IBC with 130 kg/h. Die size 200 mm, die gap 2,7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® 920NT is an ethylene-butene copolymer designed for blown film application. Excellent mechanical strength, tear and puncture resistance. 920NT contains no slip and no antiblock.

SABIC® 926NT is an ethylene-butene copolymer designed for blown film application. Excellent mechanical strength, tear and puncture resistance, 926NT contains no slip and no antiblock.

SABIC ® LLDPE BX202 is a linear low density polyethylene resin typically used for the production of biaxial orientated polyethylene (BOPE) via tenter frame technology. Typical applications are food and non-food packaging. SABIC® BX202 facilitates mono-material PE structures. This grade is also available as certified bio-renewable and circular polymer. Film properties: Film of 25 µm, produced on commercial tenter frame with >1000 kg/h output. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® LLDPE C2820T is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in casting film extrusion. Cast film product from SABIC® LLDPE C2820T exhibit excellent optical properties, easy processing & energy saving, excellent thickness uniformity, improved machine output, well controlled die line. SABIC® LLDPE C2820T is TNPP free grade. This product is not intended for and must not be used in any pharmaceutical/medical applications.

SABIC® M13024T is a Linear Low Density Polyethylene grade for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss.

SABIC® LLDPE M200024 is a linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss.

SABIC® M200024T is a Linear Low Density Polyethylene grade for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss.

SABIC® LLDPE M300024 is a linear low density polyethylene copolymer injection moulding and master-batch grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR) and gloss.

M500026 is a Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give excellent flow properties with better low temperature toughness, stress crack resistance and gloss.

SABIC® M50022T is a Linear Low Density Polyethylene grade for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss.

SABIC® LLDPEMG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG200024 is in powder form.

SABIC® LLDPE MG50026 is a high flow Linear Low Density Polyethylene grade with a narrow molecular weight distribution. SABIC® LLDPE MG500026 resin is in powder form and is designed to give excellent flow properties with better low temperature toughness, stress crack resistance and gloss.

P438J is a medium density LLDPE natural resin and TNPP free designed for extrusion applications. This grade combines stiffness, toughness, high melt strength and low gel content coupled to excellent processability due to its tailored molecular weight distribution and flow properties. It contains an optimized level of stabilizers and is free from any slip or anti-block additives.

SABIC® LLDPE PCG61 is a hexene-linear low density polyethylene typically used for healthcare applications. Films made from this resin exhibit good mechanical, optical and hottack properties. Typical application for SABIC® LLDPE PCG61 are pharmaceutical films, bags and pouches requiring good impact strength, tear resistance,optical performance andhottack properties. Film properties: Film of 50 µm and BUR = 2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2.7 mm. Compliance to RegulationsSABIC® LLDPE PCG61 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

PO COMPOUND SABIC® P1600A shows superior abrasion resistance, excellent chemical and corrosion resistance, easy processing ability, and good compatibility with HDPE pipes. Typical customer applications are mining and dredging application, a section of piping for use in transporting abrasive slurries requires pipeline with improved abrasion resistance.

R40039E is a linear low density polyethylene grade with elevated density and higher viscosity designed to provide excellent mechanical properties with high rigidity, toughness, good impact strength, low warpage as well as excellent internal and external surface finish. It is in pelletized form, UV-stabilized and has good stress cracking resistance which can be suitable for outdoor applications.

R50035 is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035 is a non-UV stabilized grade in pellet form

R50035E is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. R50035E is an antioxidant and UV stabilized grade in pellet form.

SABIC® LLDPE R50035EE is a LLDPE copolymer that provides good stress crack resistance, rigidity, toughness, gloss and very low warpage. The resin contains UV stabilizer. It is recommended that SABIC® LLDPE R50035EE is grinded before use in rotational moulding applications. Typical Applications. SABIC® LLDPE R50035EE is used for rotational moulding of large industrial and agricultural tanks, trash containers and chemical shipping drums. Because of its good mechanical properties and low warpage, it is used for injection moulding of screw closures, caps and housewares. SABIC® LLDPE R50035EE is UV stabilised; which provides good protection for the final product. Processing conditions. Oven temperature °C (°F) = 315 (600) Typical processing temperature for injection moulding machines: 210 - 240 °C. Mechanical properties. Test specimens are prepared from compression moulded sheet made according to ASTM D-1928, procedure C. This product is not intended for and must not be used in any pharmaceutical/medical applications.

RG50035 is a Linear Low Density Polyethylene grade with balanced density and viscosity designed to provide excellent stress cracking resistance, good mechanical properties with high rigidity, toughness, and low warpage. RG50035 is a non-UV stabilized reactor powder grade.