LDPE HP0321NN Low Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 170 and 230C. LDPE HP0321NN resin, when properly fabricated, shows a good combination of processability, stiffness and physical properties. LDPE HP0321NN has very low gel levels

HP0322N is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip and antiblock additives. It gives outstanding toughness and optical properties in the film.

HP0322NN is a Low Density Polyethylene grade suitable for producing heavy-duty films and does not contain slip, antiblock and antioxidant additives. It gives outstanding toughness and optical properties in the film.

HP0323NN is a Low Density Polyethylene grade suitable for producing heavy-duty films. It gives outstanding toughness and optical properties in the film. It contains no slip, no antiblock and no antioxidant additives.

SABIC® LDPE HP0722NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for foaming processes using both physical and chemical blowing agents.

HP0722NN is an additive free low density polyethylene grade suitable for producing medium duty films. It gives good toughness and optical properties in the film.

HP0723JN is a fractional melt index low density polyethylene resin, containing slip and antiblock additives. HP0723JN has been specially designed for superior processability on blown films lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. HP0723JN Contains Slip and antiblock additives. LDPE HP073JN has low gel levels. ?Excellent processability and draw down ?Good physical properties in blends with LLDPE ?Can be readily extruded using conventional blown films techniques at melt temperatures between 160 and 195°C

HP0724NN is a fractional melt index low density polyethylene resin, containing no slip nor antiblock additives. HP0724NN has been specially designed for superior processability on blown films lines leading to significant output improvements. The resin offers additionally excellent draw down. It can be used pure or in blends with LLDPE resins. HP0724NN Does not Contain Slip or antiblock additives. ?Excellent processability and draw down ?Good physical properties in blends with LLDPE ?Can be readily extruded using conventional blown films techniques at melt temperatures between 160 and 195°C

HP0823JN is a Low Density Polyethylene grade formulated with slip and antiblock additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties

HP0823NN is a Low Density Polyethylene grade formulated with no slip and no antiblock and no antioxidant additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties

SABIC® LDPE HP0824NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents.

SABIC® HP0830N is Low Density Polyethylene grade of medium density with improved stiffness and excellent optical properties. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties.

HP20023 is an additive free low density polyethylene grade with high melt flow, offering good processability and capability to accept high pigment loading during compounding.

HP2022JN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2022JN contains slip and antiblock additives.

SABIC® LDPE HP2022NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for foaming processes using both physical and chemical blowing agents.

HP2022NN is a Low Density Polyethylene grade suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. HP2022NN contains no slip, no antiblock and no antioxidant additives.

HP2023JN is a Low Density Polyethylene grade suitable for general-purpose packaging. It exhibits better draw down, good optical and mechanical properties. HP2023JN contains slip and antiblock additives.

HP2023NN is a Low Density Polyethylene grade suitable for general-purpose packaging. It exhibits better draw down, good optical and mechanical properties. HP2023NN contains no slip, no antiblock and no antioxidant additives.

SABIC® LDPE HP2024JDF is a grade typically used in foam applications. It is with slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents.

SABIC® LDPE HP2024NDF is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for crosslink- and non-crosslink foaming processes using both physical and chemical blowing agents.

LDPE HP2025JN Low Density Polyethylene Resin is a high clarity resin designed for clarity over wraps applications. When properly fabricated, LDPE HP2025JN displays: excellent processability and drawdown; very good toughness and draw down; superior optical properties; and excellent tensile and tear strength. It can be readily extruded using conventional blown film techniques utilizing melt temperatures between 160 and 175 0C. HP2025JN Contains Slip and antiblock additives. LDPE HP2025JN grade has very low level of gels.

LDPE HP2025NN Low Density Polyethylene Resin has been designed with and optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, LDPE HP2025NNdisplays: excellent processability; low neck-down (cast film); very good toughness and impact properties; and good tear strength. In foam extrusion, LDPE HP2025NN gives and ideal balance between cell growth and stabilization to allow the production of very low density products without voids. The resin Does not contain any slip or antiblock additive. LDPE HP2025NN has very low level of gels

HP2027LN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. It contains slip and antiblock additives.

HP2027NN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. It contains no slip, no antiblock and no antioxidant additives.

HP4023WN is an antioxidant free low density polyethylene grade suitable for producing general-purpose films. It contains slip and antiblock additives. It gives excellent processability and optical properties with good mechanical properties.

HP4024N is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024N contains no slip and no antiblock additives.

HP4024WN is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024WN contains slip and antiblock additives.

HP4024ZN is a Low Density Polyethylene grade suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. HP4024ZN contains high level of slip and antiblock additives.

LDPE HP4025ZNLow Density Polyethylene Resin can be readily extruded using conventional blown film techniques utilizing melt temperatures between 150°C and 170°C. LDPE HP4025ZN, when properly fabricated, shows good mechanical properties and high optical properties. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives

HP4027JN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. HP4027JN contains slip and antiblock additives.

HP4027NN is a Low Density Polyethylene grade with increase density. It typically exhibits better draw down ability with high output. Films typically have excellent optics and high rigidity. HP4027NN contains no slip, no antiblock and no antioxidant additives.

HP7022 is a free additive low density polyethylene offering a unique combination of consistent processability, flexibility and toughness. Articles manufactured from HP7022 exhibits excellent impact strength, low shrinkage and good gloss.

HP7023 is a Low Density Polyethylene grade that offers a unique combination of consistent processability, flexibility and toughness. Articles manufactured from HP7023 exhibits excellent impact strength, low shrinkage and good gloss.

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG00 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG00 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG01 is an additive-free grade produced using SABIC’s proprietary high pressure Clean Tubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG01 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG02 is an additive-free grade produced using SABIC's proprietary high pressure CleanTubular Reactor (CTR®) which typically ensures grades with high purity. It is typically used for semi-rigid containers obtained by Blow Fill Seal (BFS) process and medical films. Compliance to Regulations SABIC® LDPE PCG02 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG06 is an additive-free grade with high purity and very low migration levels. It is typically used for semi-rigid IV containers for Large Volume Parenterals (LVP) obtained by Blow Fill Seal (BFS) process. Compliance to Regulations SABIC® LDPE PCG06 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG09 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures, small bottles and secondary packaging. Compliance to Regulations SABIC® LDPE PCG09 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).

SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG22 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding to produce caps and closures. It exhibits a high MFR for good flow properties. Compliance to Regulations SABIC® LDPE PCG22 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI).