1005FY20 is specially designed for the production of multilayer films in blends with LLDPE for packaging of Liquids (milk, oil etc) & solids on fully automatic Form, Fill & Seal (FFS) machines. Film produced from this grade exhibits good impact resistance, and heat sealing characteristics. The incorporation of necessary additives in the polymer ensures good surface slip and smooth flow of film on packaging machines. It can be pigmented by using suitable food contact approved master batches.

1020FA20 is a film grade and can be processed easily on conventional blown film lines. The grade is manufactured without any slip additive to facilitate adhesion during lamination.

1070LA17 is an extrusion coating grade Low density Polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives. It exhibits excellent drawdown characteristics maintaining good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat and pressure lamination.

16MA400 is an injection molding grade with high melt flow index for molding of very thin, intricate and large items having adequate mechanical properties. This grade is also an ideal choice for making master batches with higher loading.

22FA002 is a film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. It has been specially designed for the production of film with good environmental stress crack resistance, mechanical and impact resistance. Film produced from this grade is ideally suitable for heavy duty applications.

These are blown film grades and can be extruded with considerable ease. 24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. 24FA040- without Slip additive

These are blown film grades and can be extruded with considerable ease. 24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. 24FS040- with Slip additive.

Relene 45GP004 (PE:80) is a natural coloured grade for pipe extrusion. It possesses bimodal molecular weight distribution, which improves processability. This grade meets the MFI, Density & Hydrostatic strength requirements of material grade PE:80 as per IS 4984:2016 for 'Polyethytene pipes for Water Supply - Specification' when incorporated with adequate quantity of carbon black as specified in clause 5.3 of IS: 4984: 2016. It will also meet the requirements of the designation PE EL C45T006 mentioned in the clause 4.2 of IS 7328: 1992. Pipe made from Relene 45GP004 grade passes the Internal Pressure Creep Rupture Test when tested with 4.5 MPa induced stress at 80°C for 165 hrs and with 4.9 MPa induced stress at 80°C for 48 hrs as per clause 8.1 of IS 4984:2016, thereby meeting the requirement of PE:80 grade. This grade conforms to ISO 4427 specification shown below and has been certified for MRS > 8 MPa as per ISO 9080.

Relene 46GP003 (PE:100 ) is a natural coloured grade for pipe extrusion. It possesses bimodal molecular weight distribution which improves processability. This grade meets the MFI, Density & Hydrostatic strength requirements of material grade PE:100 as per IS 4984:2016 for 'Polyethytene pipes for Water Supply - Specification' when incorporated with adequate quantity of carbon black as specified in clause 5.3 of IS: 4984: 2016. It will also meet the requirements of the designation PE EL C45T003 mentioned in the clause 4.2 of IS 7328: 1992. Pipe made from Relene 46GP003 grade passes the Internal Pressure Creep Rupture Test when tested with 5.4 MPa induced stress at 80°C for 165 hrs and with 5.7 MPa induced stress at 80°C for 48 hrs as per clause 8.1 of IS 4984:2016, thereby meeting the requirement of PE:100 grade. This grade conforms to ISO 4427 specification shown below and has been certified for MRS > 10 MPa as per ISO 9080.

Relene 46GP009 is a natural coloured grade for pipe extrusion. It possesses bimodal molecular weight distribution which improves processability and mechanical properties. This grade meets the MFI and Density requirements of Material as per IS 4984:2016 for 'Polyethytene pipes for Water Supply - Specification' when incorporated with adequate quantity of carbon black as specified in clause 5.3 of IS 4984:2016, will meet the requirements of the designation PE EL C45T012 mentioned in the clause 4.2 of IS 7328: 1992.The pipe made from this grade meets the hydrostatic strength requirement of PE-63 class of pipe as per IS 4984:2016. The grade has excellent ESCR properties and is suitable for pesticide bottles.

46GP009UV is a natural HDPE extrusion grade & possesses bimodal molecular weight distribution which improves process ability and mechanical properties of pipes & ducts. 46GP009UV is UV stabilized grade & is suitable for producing Telecom ducts to be used as Underground Optical fiber cable & conduits and for other general-purpose application. The grade is designed to sustain outdoor exposure of 12 months. 46GP009UV conforms to TEC generic requirements No. GR/TX/CDS- 008/03/MAR - 2011 & GR/DWC-34/01 SEP 2007.

52GB002 is a High Molecular Weight High Density Polyethylene (HMHDPE) blow molding grade with balanced stiffness and impact strength. It possesses broad molecular weight distribution, very good swell and excellent processability. 52GB002 can readily be processed on most of HDPE blow moulding machines with accumulators.

52GB003 is a High Molecular Weight High Density Polyethylene blow moulding grade with high stiffness and impact strength and good ESCR. It possesses medium molecular weight distribution, very good swell and easy processability. 52GB003 can readily be processed on most HDPE blow moulding machines.

52GB007 is a High Molecular Weight High Density Polyethylene blow moulding grade with high stiffness and impact strength and good ESCR. It possesses medium molecular weight distribution, very good swell and easy processability. 52GB007 can readily be processed on most HDPE blow molding machines. This grade can also be used for HM film, liners and other extrusion applications.

54GB012 is a High Density Polyethylene (HDPE) blow moulding grade. It possesses relatively higher density and stiffness, good flow and impact strength, good ESCR and bimodel molecular weight distribution for easy processability. 54GB012 can readily be processed on most HDPE blow moulding lines.

B5010 is a High Molecular Weight High Density Polyethylene blow moulding grade with good impact strength. The resin offers excellent melt strength, swell, easy processability. This grade can be blended for using for various applications

Relene B5502 is a High-Density Polyethylene grade for general purpose extrusion blow molding applications. It also offers excellent melt strength, very good swell characteristics and easy processability. Articles processed from this grade exhibit excellent balance of stiffness, impact strength. This grade can be used for general-purpose applications.

B56003 is a High Density Polyethylene (HDPE) grade suitable for general purpose extrusion blow moulding applications. Articles blown from this grade exhibit good stiffness. The resin offers good melt strength, ESCR and impact resistance and typically used for packaging of oil, vanaspati, general purpose containers, jerry can, etc.

E19010 is a Linear Low Density Polyethylene (LLDPE) grade, for General Purpose Applications like Blending for Injection Moulding, Drip Lateral and Thick Extruded Products. This grade meets the requirements of material as per IS 12786:1989 on irrigation equipment - Polyethylene pipes for irrigation laterals - specification. When incorporated with adequate quantity of Carbon Black as specified in the clause 4.1 of IS 12786:1989, the pipe made from this grade will meet creep rupture stress requirement of PE-25 class of pipe.

E24065 is a Butane comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE.

E52009 is a High Density Polyethylene (HDPE) grade with low gel content, excellent orientation characteristic and negligible water carry-over. This grade is recommended for making raffia tapes and monofilaments (Diameter >0.20 mm) with excellent balance of high tenacity and good elongation.

EE20 is a High Density Polyethylene (HDPE) grade with low gel content, excellent elongation and orientation characteristics with negligible water carry-over. This grade is recommended for making low denier raffia tapes with very good elongation and moderate tenacity and recommended for wrapping fabrics for various applications.

These are Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. The grades are designed for blown film applications. They have excellent draw down characteristics with very good impact strength and tear resistance. F18010: Without Slip & Antiblock

Relene F18030 is a butene based Linear Low Density Polyethylene grade with Optimum level of Antioxidants & without Slip & Anti block and is designed for good processing on Cast Film lines with balanced mechanical & optical properties

These are Butene comonomer based Linear Low Density Polyethylene (LLDPE), with optimum levels of antioxidants. The grades are designed for blown film applications. They have excellent draw down characteristics with very good impact strength and tear resistance. F19010: With Slip & Antiblock

Relene F4600 is a High Density Polyethylene grade suitable for general purpose blown film & extrusion blow moulding applications. Articles blown from this grade exhibit moderate to good stiffness. The resin offers good melt strength and impact resistance.

F46003 is a High Density Polyethylene grade suitable for general purpose blown film & extrusion blow moulding applications. Articles blown from this grade exhibit moderate to good stiffness. The resin offers good melt strength, ESCR and impact resistance.

F46003E is a High-Density Polyethylene grade suitable for blending in monolayer film applications. The resin offers good processability and stiffness to the blown film product.

HD50MA180 is a high flow High Density Polyethylene (HDPE) grade. This grade is specially formulated to manufacture large, intricate, thin walled multi cavity injection moulded products. It has narrow molecular weight distribution, which makes it easier to process and products manufactured have good gloss and rigidity.

HD53EA010 is a High Density Polyethylene (HDPE) grade produced and specially formulated to manufacture stretched tape products and other extrusion products with good combination of tenacity and elongation. It has very good processability and stretchability, less motor load and high output combined with good tape properites to make it a grade of choice.

HD55EF010 is a High Density Polyethylene (HDPE) grade, specially formulated to manufacture oriented monofilament products. It has narrow molecular wight distribution and has very good processability, less motor load and high output combined with very good elongation and filmanet properties to make it a grade of choice.

J1005FY20 is a film grade Low Density Polyethylene (LDPE). It has been specially formulated for the production of films for liquid milk packaging on fully automatic Form, Fill & Seal (FFS) type of machines. Film produced from this grade exhibits good impact resistance and heat-sealing characteristics. The incorporation of necessary additives in the polymer ensures good surface slip, easy open ability and smooth flow of film on packaging machines. It can be pigmented by using suitable food contact approved masterbatches.

J1007FA20 is a film grade Low Density Polyethylene (LDPE). It has been specially designed for easy processing on blown film plants. The grade is manufactured without any slip additive for lamination film application. The grade can be used alone or for blending in foam application for better melt strength.

These are film grades and can be processed easily on conventional blown film lines. J1020FS20 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability. J1020FA20 is manufactured without any additive to facilitate adhesion during lamination. J1020FA20: - Slip: No - Antiblock: No

J1020FF20 is a natural Low Density Polyethylene (LDPE) resin for foam and film extrusion. It has very good melt strength which provides uniform cell structure, cell growth and stiffness in foam. The grade can be used for making foam using both physical and chemical blowing agents. It can be used for manufacturing films as well. It can be processed easily on conventional blown film lines. The grade is manufactured without any slip additive to facilitate adhesion during lamination.

J1020XA20 is a natural Low Density Polyethylene resin for Medium voltage cable insulation using direct peroxide addition. It is designed for easy processing on conventional cable extrusion lines. It does not contain any additive and is un-stabilized. Required amount of antioxidant must be added to achieve desired ageing performance.

These are blown film grades and can be extruded with considerable ease. J24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. J24FA040: - Slip: No - Antiblock: No

These are blown film grades and can be extruded with considerable ease. J24FS040 has been blended with necessary additives during manufacture to obtain good surface slip and easy open-ability between two layers of the film. J24FS040: - Slip: Yes - Antiblock: Yes

JD22010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drip laterals produced out of this grade has outstanding processability, tensile and elongation properties. This grade meets the requirements of material as per IS 12786: 1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification'. When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786: 1989,the pipe made from this grade will meet the creep rupture stress requirement of PE-25 class. Additives details: - Heat Stabilizer: Yes

JE24065 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE. Additives details: - Heat Stabilizer: Yes